ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Thank you sir👏👏neat explanation👌👌, upload more videos,,thank u sir...
Compact, semi compact and plastic sections! Out or these three sections , for which section we have to check web buckling?
Extremely well explained
Excellent
How to taken the valie of modulis of elasticity
Can any say how do we get the plastic modulus provided value Zp provided value ???
👌👌👌
Good explanation
Plzz give IS code page nos also
Spr sir🔥
in check for moment how u have Taken Zp =348.76 instead of 205.plz explain
Refer is steel table book or IS800-2007code book
Thanks Sir
you did not tell about the value of zp provided
Sir what is the formula for checking deflection when the beam is carrying udl and central point load ???
And please explain what is the procedure when0.6 Vd < V means high shear
In that case add both formula Like deflection because of UDL + deflection of PL
Well explain... keep uploading
step 5 me Zprovided 348 kaha se aaya aur Z required 234 kaha se aaya
What to do if ∆actual/maximum >∆ permissible
Increase cross section area
@ 08:43 b/2/tf
So what is your doubt
He's saying u made a mistake in that video
May be
I can't understand step 4 please explain properly
how did u find Ze = 205.33/ from where i havent get it ,could u plz thanks
It it from steel table
Ze required = Zp required/ 1.14
sir bht mistake hain calculation part me
SIR how r1 value comes ?
Steel table
@@civilshiksha thank you sir
16:20 Web buckling
Plz tel me about deflection in Ixx value
How to take
It is taken directly from steel table... And if you are confused why are we taking Ixx not Iyy,answer: we can checking it's bending strength about XX axis, that's why we are taking c/s properties about XX axis i.e; Ixx
step jump kar kar ke sikha rahe ho
Bad 👎 not impressed
Then don’t watch 😂😂
Thank you sir👏👏neat explanation👌👌, upload more videos,,thank u sir...
Compact, semi compact and plastic sections! Out or these three sections , for which section we have to check web buckling?
Extremely well explained
Excellent
How to taken the valie of modulis of elasticity
Can any say how do we get the plastic modulus provided value Zp provided value ???
👌👌👌
Good explanation
Plzz give IS code page nos also
Spr sir🔥
in check for moment how u have Taken Zp =348.76 instead of 205.plz explain
Refer is steel table book or IS800-2007code book
Thanks Sir
you did not tell about the value of zp provided
Sir what is the formula for checking deflection when the beam is carrying udl and central point load ???
And please explain what is the procedure when
0.6 Vd < V means high shear
In that case add both formula
Like deflection because of UDL + deflection of PL
Well explain... keep uploading
step 5 me Zprovided 348 kaha se aaya aur Z required 234 kaha se aaya
What to do if ∆actual/maximum >∆ permissible
Increase cross section area
@ 08:43 b/2/tf
So what is your doubt
He's saying u made a mistake in that video
May be
I can't understand step 4 please explain properly
how did u find Ze = 205.33/ from where i havent get it ,could u plz thanks
It it from steel table
Ze required = Zp required/ 1.14
sir bht mistake hain calculation part me
SIR how r1 value comes ?
Steel table
@@civilshiksha thank you sir
16:20 Web buckling
Plz tel me about deflection in Ixx value
How to take
It is taken directly from steel table...
And if you are confused why are we taking Ixx not Iyy,
answer: we can checking it's bending strength about XX axis, that's why we are taking c/s properties about XX axis i.e; Ixx
step jump kar kar ke sikha rahe ho
Bad 👎 not impressed
Then don’t watch 😂😂