Ill be honest I really wasn't expecting too much from the changes, but with just the essential mods (and especially faster hdt-smp) I now get an increase of ~25 frames, almost a consistant 60 fps in all areas of skyrim, I am grateful for your video.
@@inferno7837 I searched in google how to turn off fog in caves in skyrim and downloaded the mod but I dont remember the name. It had pictures with and without fog and for me It helped a lot with the framerate .
@@inferno7837 I also opened skyrim config file and maybe down at the end there was two options for particles which I made them to 0 and it helped with the big fire smokes.
Just in time! I am finally satisfied with the way my Skyrim looks at 85 mods, but unfortunately I'm getting bad performance at cities. Thanks for the video! Been enjoying your mod showcases a lot.
@@isaacphillips4247 what you got in your rig? Got an trioZ 3080 and an ryzen 7 5600x and im at 557 active mods. Im running some 8K Mods and the rest is 4k textures even im playing on 1440p. I overhauled everything, from animations to birds in the sky. Over 300gB of Mods. I have 49-60fps stable. No crashes so far except when entering windhelm, thats because of JK‘s skyrim, so disable it before entering. 🥸
@@DripzEU823 I got a laptop holding i712700H and an RTX 3060. I would like to play around 60 frames on my 2K screen if possible. Also I'm very new to all this modding, if you could give me some recommendations based on which mods you believe will work best with each other that would be very insightful.
Remove Useless Plants is another amazing mod. Like it says removes a bunch of plants that are not really noticeable and you can pick and choose by deletin the required Nif files which plants stay and which don't i haven't used all of them and gained a really noticeable boost in performance, since for example shrubs which are ugly are EVERYWHERE and hog a bunch of performance
I’m 3/4 of the way through the video and I went from “I’m going to already have all of these” to “I have most of these but there are settings and mods I didn’t know about.” I bookmarked this to go over later . My current load order is frozen, where I’m only allowed to fix issues and not make any other changes. But after I’m sure the current one is good, I’m going to copy it to a new profile and make improvements for my next game. Thanks for making this video!
looking at Riverwood from the bridge with 2 extra followers wearin SMP including meyself went from 45 to 58 because i didnt have 2 mods in this vid. Ur a champion mate, cheers 🤙
That helped me a lot! Thank you so much! I already had some Mods you mentioned and which should increase the performance (fe. eFPS and USSEP) and yes, it was better, but sometimes it was stuttering for a few seconds. Now I added some other mods you mentioned, f.e. recursion monitor, skyrim prio, skyrim landscape/water fixes, lightened skyrim and cleaned skyrim textures and OMG, no stuttering anymore. O.O Awesome! I just can recommend these mods to everyone.
If after all this you are still experiencing stuttering and big frame drops when looking at certain directions, I would really recommend Cathedral Assets Optimizer. First backup your mods, then Open Cathedral Assets Optimizer and: 1) unselect Extract BSA 2) click Open Directory and select the root directory where your mods are installed so every mod will be affected. 3) on the texture tab select Compress Textures and Generate Mip Maps and click Run. 4) profit If still stuttery follow same procedure but in step 3 before clicking run, activate downsizing -> by ratio and leave 2 on height and width. This process can take a long time but will massively improve your performance and reduce frame fluctuation by a lot, especially if using a lot of 4k and 8k textures + enb + dyndolod. You will lose some quality of course but it will be barely noticeable, and the frames you will get back will be 100% worth. You can even backup your entire mod collection and try, if you don't like the results just roll back the changes by overwriting mods with backup. Sorry for the wall of text.
@@proxmitikgames I have been using it this way for quite some time and never had an issue, but if you want you can follow the exact same steps without opening it through your mod manager and get the same results.
The FPS increases are 0, but now all the textures of weapons and armor have turned into potatoes , I did not make a backup copy since there were 80gb mods I do not advise anyone to do this, only if you choose a certain mod for texture compression, BUT IN NO CASE DO NOT CHOOSE ALL MODS
@@ASAG_lockk Optimizing and compressing your textures should definitely not had such an impact on your textures. If they turned into potatoes after you downsized if because you are using 2k textures or less to start with, so this is not for you. This is for people with 4k+ textures that also use enb and dyndolod, it will not be a magical solution for very low end PCs. Sorry that you did not backup, you should always do so when modifying your mods.
really really good video that shows a bunch of options from essential to optional mod fixes for those desperate in need. Best part; it just (actually) works.
Bro just wanted to say your content is amazing. Noticed you've been having some bumps in subs recently (I'm certainly one) and definitely deserved. Looking forward to more of your videos and this channel blowing up!
For AMD gpu users I highly recommend DXVK. It's a translation layer that converts directx to vulkan. I run Skyrim on RX 6600XT and I wasn't able to max out the gpu usage with only 30-40fps. Now I run smooth 60fps at almost all times. Nvidia and Intel users should probably notice a performance boost too, but I am not sure. Edit: see my comment below for instructions ;)
Soft! Every time I look at my Skyrim and say to myself “this seems like a good thing to work on today,” you release a video on that exact topic. It’s always exactly what I needed and always so easy to follow. You’re a saint. I owe you a beer
I would actually like to suggest you don’t just show B roll footage unrelated to what your talking about. For example when talking about the upscaling, actually show it off and show before and after. Otherwise your channel could just be audio and the video is pointless
Shadow boost would do more for you if you didnt use beth ini since beth ini already lowers shadow render distance and quality to a more logical amount more then likely shadow boost isnt doing much at that point.
Thumbs up! This is actual great video for a change. Even though it has been over a year, and the title is a bit obscure. I wonder if there's an actual good video for vanilla users that explains absolutely essential (legitimately) )mods that are mandatory for vanilla users. As in meant only for fixing problems with the game and optimizing it. Without any unnecessary actual non-essentials like qol and other bloat. Most users and beginners only care about functionality, and perhaps graphics improvement in order to play the actual game as it was designed with exception of design flaws (such as glitches that devs have overlooked/ignored). I have not even played the game yet which has recently been installed and dormant, but getting closer to compiling a legitimate list for vanilla with only mandatory improvements on functionality and basic graphics.
this is helpful for me because technologically, I'm kind of an idiot. I'd just kind of accepted that my game would have lower FPS because I didn't know where to start for optimising performance while still letting it look good :)
The unofficial patch is sorta a love hate thing for me: the author Arthmoor is an asshole for one, for two many of the changes that mod implements are not exactly “fixes” but things that Arthmoor wanted to be different, they don’t all objectively fix issues within the game. But it hasn’t done anything outrageously bad to my game, at least nothing I’ve noticed. The only reason I’ve installed it is because so many other mod authors have it as a requirement to install their mods. If I weren’t for that, I wouldn’t use it as I don’t use any of his other mods
Appreciate huge work. I am sitting on mediocre setup like 5600xt and I realised that i spend loads of time on comparing every mod with fps difference. Like you know, every grass/textures/lighting mod compare. Have you ever considered creating a short list of "fps friendly" mods for graphics? Though game is old but mods can really burn stuff with budget pcs :D Cheers!
*Hey Gents, I came here as a updater for the Skyrim Upscaler mod* For people that have been paying attention to the Mods updates a features, at first glance it looks awesome to have. You're getting 30 - 40 FPS Boost without sacrificing Graphics Quality, but trust me looks can be deceiving. As of right now and likely for a couple more weeks/months to come Upscaler does not work properly. The following results are possible if installed (regardless of correctly or incorrectly) Immediate CTD upon launch of the game Graphics Drivers Crash and CTD (Rare occurrence since your GPU stops it) Launch of the game, yet blackscreen or complete missing textures for the world. As what was stated above, It is not a good time to install this mod. So please. Spare yourself the confusion like many others before you and don't install it until further notice. *DON'T INSTALL IT RIGHT NOW*
After installing about half of these, one did not work, and the other 10 or so made no noticeable difference. But, I'm running on Linux, using SteamTinkerLaunch to run Vortex, and Vortex to launch Skyrim.
It is worth noting that upscaler offers DLAA which will not let you play at lower resolution, but will dramatically improve graphical fidelity, works with ENB, and lets you turn off al vanilla AA. I do still see a small FPS boost when turning it on.
NVIDIA reflex mod? I need to install this ...great vid man, will help a lot of Skyrim player modding there game... You might maybe concierge regrouping all those mods and make one overhaul mod. Modding community is amazing but imagine those guys working together....would make life easier for everyone
I was missing a few of these. I installed eFPS, Nvidia Reflex, Rec Monitor, and object remover. I already had most of the others which I feel are mandatory. It gave me 10 extra fps and seems very smooth and crisp. Using Rudy ENB on Ultra settings, with everything in 4k res. I have over 300 mods installed and it runs around 80 - 120fps. Very nice. After installing these I did have one new bug I have never seen before. I loaded into the Ragged Flagon and it had no walls. All you could see was night sky and stars. I restarted the game and loaded the same save and the problem was gone. I'm just wondering if it was Nvidia reflex support. Or something else that I'm missing entirely. Not a big deal since the restarting the game fixed it, because just reloading didn't. Could be just skyrim though, no idea. Long as it's not constant, I dont really mind. Edit: It was an ELFX Shadows bug that got a patch. The problem is no more.
@@masqueradet Yes, I would say that is the average. If it drops it recovers after I take a few steps in game. But this is outside the cities. I get higher frames in the cities and I have Jk's Skyrim all in one installed. I was getting 160fps in Whiterun just today. Cities and interiors run like a dream. I drop to around 55fps on rare occasions in areas with heavy trees and grass. Because I have complex grass for ENB. It has it's own shadows and it moves realistically. Riften forest area hovers around 60-120 fps. I have a G-Sync monitor the Acer Predator 170hz, 1440p so I don't notice frame drops at all. There might be a slight visual difference because you notice 60fps more than you do if it's over 80 frames. But nothing jarring that takes you out of the beauty or immersion. I have over 4000 animations and poses installed with CBPC next gen bodies and physics too and my processor doesn't even feel it. I have so many NPC mods that add NPCs with AI. So much going on in the cities.. I even have enemy faction raids on the cities and towns. Bandits, vampires, etc.. This PC is fantastic. This is the one I bought. www.x-kom.pl/p/735984-desktop-g4m3r-hero-i7-11700f-32gb-2tb-rtx3060ti.html I didnt feel like building one myself this time around.
@@IKnowHowItEnds Sounds good man, then I must clearly be doing something wrong. Because I don't get nearly as much fps while running an RTX 3080. Whiterun is kind enough to give me a measly 45 fps at the gate when entering. Curious as to how the game handles your modlist vs mine.
Any idea why modlist creators would want us to skip the BethINI step? They seem to think it's old and forces you to 60 fps, which the engine fixes should already have unlocked.
The issue with USSEP is that they explicitly do not want to support older Skyrim versions, that for me have been the only way to get certain mods working.
Is it normal that your riverwood looks like a forest because of northern roads ? I can see some origin of the forest plants, i have those mods too and i was wondering if its a bug.
I will be honest with you. A mod list is often not based on the fact that you want to get too much out of it, but on how strong the specification of your machine is. What's under the hood more precisely. The size of the monitor doesn't really matter either, because if you still have an old 4:3 monitor, it won't be capable of 1440. Also, not to get the most out of the given mods. The SSE is only and exclusively optimized for 16:9-16:10, and as far as I know, there is no mod that can fix this 100%. This becomes a big problem when, say, you download monitor-specific mods. There are only wide screen mods for the game, so you will only suffer through the various repair packages, up to the mods that replace the loading screens. The total performance does not matter how much there is, the amount of ram, the amount of processor cores and clock speed. The amount of vram of the video card and its clock speed. I could list more. However, it is a fact that the mods you listed improve the game a lot. In my case, quite a lot. The base game is so broken (I mean SE and AE) that it refuses to produce 20fps in open spaces, the situation is obviously different indoors, but it's still confusing. I use most of the mods compressed into a separate package, and whenever I feel like installing the game, I also take these mods from my bookshelf. And overall, the performance improvement is huge. You can have an old computer, even 20 years old, it will be able to run the game with good performance and you don't have to make any compromises. That's all I know about this video topic.
I have stable (locked) 60 fps outdoors (RTX 3060 + i5 10400 16gb RAM 3600 mHz SSD 960 gb) with a lot of trees + grass + Silent Horizons ENB + some visual effects + weather mod + some additional NPC +cosmetic mods (for NPC too). But I still have some fps drops from 65 to 50 or even 40 while I'm looking at some directions. It happens in certain areas like when I'm standing in the fields near Whiterun and looking at the Khajiit camp or stables 🤔 In Fallout 4 I have installed heavier mods, and I have more fps there without any drops. So I think may be it's an engine problems, which can't be solved with mods? I don't think it's my pc problem 🤔
Can anyone tell me exactly how to setup SSE display tweaks? Everytime I install it and no matter what settings I use it causes weird visual effects such as red and blue tinted overly bright Shadows and weird outline and bloomeffects on smoke in the main menu and in-game. I've tried it both with and without ENB and yet anytime I display tweaks it's significantly harms my game's visuals and I cannot figure out why. I've tried uncapping the framerate by other means but the same thing happens
How do you make your game look so clean and natural? I'm constantly messing around changing between enb's and settings but never manage to make it look that good, there's always something off either with the colours and lighting
@@brucemooney1277 mmh… I don’t think that mod will help you that much for your problem…unless it got updated since i last check it. If you use an ENB your best bet is to tweak the water section, especially increasing the caustics. (You can see it in this video also, near the shores: the more the water is shallow the more caustic is visible giving this whitish tint and hiding the transition line).
Can someone please help me understand how to install "faster hdt-smp"? There are like 6 requirements but they also seem optional aside from NPC Crash Fix and XP32. Sorry I'm not even new to modding but this one is giving me a headache for sure.
My real problem is with water and weather events. I'm using Water for ENB and Obsidian Weathers with RudyENB. Since my machine is dated already, I wanted a good looking yet good performance enb. When I get to waterfalls between riverwood and whiterun my fps drops from 60 to +-30. It also happens in rain or snow storms (rain is worse than snow). Thanks for the video, I'm gonna test those. The essentials I alrady had, but let's see if the extras are going to help. Specially the one that helps with the papryus scripts, I'm already over 280 and 250 plugins, sometimes the scripts can... welp.
Man help me out please. I installed a few of these and now wherever I walk, none of the object or npc assets are loaded. I get to a town and it can take 10 minutes for lods to disappear and the town to show up. I’m like 60 hours into trying to fix this and I haven’t progressed a single inch. There’s just nothing about this issue anywhere. DynDOLOD uninstalled as well as anything that touches occlusion. Just straight up broken and it was perfect before I got the idea to get some of these mods.
Hmm never seen that before. It could be the shadow boost mod as it touches load distances, try uninstalling that one. Also you shouldn't be uninstalling Dyndolod mid game
@@SoftGamingOfficial And I'm experienced enough to know to definitely do this on a new game haha. I fixed this exact problem with Cities of the North Falkreath a couple weeks ago and I fixed it by removing a duplicate patch that Nature of the Wild Lands came with. But I can't have two files trying to edit the whole world simultaneously now like that so idk.
@SoftGamingOfficial ah drat, I am new to modding and don't have ENB. I'm contemplating if my laptop can handle it.. it only has a gtx 1650.. what do you think?Anyway, thank you for the guide!
Which Version of "ENB Complex Grass - Patch Compendium for various grass mods" are u using? The Folkvangr for ENB Complex Grass version or? And nice Modlist :D
This is weird. I use default graphics card on my pc. I get like 100+ frames playing tf2, so I think I have a good pc. I play Skyrim and it drops to 20 and below. I have a lot of mods… but that’s really weird. I run my game 1024 x 768. I’m thinking it’s because of how simplistic tf2 is… maybe because of the simplistic cartoony style it doesn’t have to render too many pixels? If I replace my textures and cell shade it or something will it fix itself? Currently I’m trying everything because I have a little time before spending $600 on a good graphics card. It’s kind of maddening how it’s the same kind of 3d environment but for some reason it’s so different. I’m gonna post an update on anything I found… hopefully I’ll help people with the same problem.
Ill be honest I really wasn't expecting too much from the changes, but with just the essential mods (and especially faster hdt-smp) I now get an increase of ~25 frames, almost a consistant 60 fps in all areas of skyrim, I am grateful for your video.
Can you tell which mods you used? I have also started to use some mods for getting rid of fog and dust effects which kills like 10fps.
well can you help me for fps boost as well?@@-047-
@@-047-hey! Which mod did you use to get rid of fog and dust particles
@@inferno7837 I searched in google how to turn off fog in caves in skyrim and downloaded the mod but I dont remember the name. It had pictures with and without fog and for me It helped a lot with the framerate .
@@inferno7837 I also opened skyrim config file and maybe down at the end there was two options for particles which I made them to 0 and it helped with the big fire smokes.
Just in time! I am finally satisfied with the way my Skyrim looks at 85 mods, but unfortunately I'm getting bad performance at cities. Thanks for the video! Been enjoying your mod showcases a lot.
City fps boost, it removes city LOD. Fair trade in my opinion.
Could you please lemme know your system configuration, I wanna compare and see if I can run all those visual overhaul mods or not.
@@isaacphillips4247 what you got in your rig?
Got an trioZ 3080 and an ryzen 7 5600x and im at 557 active mods. Im running some 8K Mods and the rest is 4k textures even im playing on 1440p. I overhauled everything, from animations to birds in the sky. Over 300gB of Mods. I have 49-60fps stable. No crashes so far except when entering windhelm, thats because of JK‘s skyrim, so disable it before entering. 🥸
@@DripzEU823 I got a laptop holding i712700H and an RTX 3060. I would like to play around 60 frames on my 2K screen if possible. Also I'm very new to all this modding, if you could give me some recommendations based on which mods you believe will work best with each other that would be very insightful.
I have 1300 mods im just tryna increase the fps a bit it ranges from 50-70 rn imma test some of these mods
Remove Useless Plants is another amazing mod. Like it says removes a bunch of plants that are not really noticeable and you can pick and choose by deletin the required Nif files which plants stay and which don't i haven't used all of them and gained a really noticeable boost in performance, since for example shrubs which are ugly are EVERYWHERE and hog a bunch of performance
But I like the ugly shrubs
@@jackcolson4745 I too... /_ \
SSE engine fixes and papyrus tweaks boosted my fps significantly, thanks.
So what you activated in the ini?
I’m 3/4 of the way through the video and I went from “I’m going to already have all of these” to
“I have most of these but there are settings and mods I didn’t know about.”
I bookmarked this to go over later .
My current load order is frozen, where I’m only allowed to fix issues and not make any other changes.
But after I’m sure the current one is good, I’m going to copy it to a new profile and make improvements for my next game.
Thanks for making this video!
looking at Riverwood from the bridge with 2 extra followers wearin SMP including meyself went from 45 to 58 because i didnt have 2 mods in this vid. Ur a champion mate, cheers 🤙
That helped me a lot! Thank you so much! I already had some Mods you mentioned and which should increase the performance (fe. eFPS and USSEP) and yes, it was better, but sometimes it was stuttering for a few seconds. Now I added some other mods you mentioned, f.e. recursion monitor, skyrim prio, skyrim landscape/water fixes, lightened skyrim and cleaned skyrim textures and OMG, no stuttering anymore. O.O Awesome! I just can recommend these mods to everyone.
Great video man, much appreciated. Already using some of the mods in your list and they work wonders, so looking forward to try the rest.
If after all this you are still experiencing stuttering and big frame drops when looking at certain directions, I would really recommend Cathedral Assets Optimizer.
First backup your mods, then Open Cathedral Assets Optimizer and:
1) unselect Extract BSA
2) click Open Directory and select the root directory where your mods are installed so every mod will be affected.
3) on the texture tab select Compress Textures and Generate Mip Maps and click Run.
4) profit
If still stuttery follow same procedure but in step 3 before clicking run, activate downsizing -> by ratio and leave 2 on height and width.
This process can take a long time but will massively improve your performance and reduce frame fluctuation by a lot, especially if using a lot of 4k and 8k textures + enb + dyndolod.
You will lose some quality of course but it will be barely noticeable, and the frames you will get back will be 100% worth.
You can even backup your entire mod collection and try, if you don't like the results just roll back the changes by overwriting mods with backup.
Sorry for the wall of text.
Great advice mate, thanks for sharing your knowledge.
Is this really safe? Reading on the actual mod page, it says to not load it through your mod loader as I can cause VFS errors.
@@proxmitikgames I have been using it this way for quite some time and never had an issue, but if you want you can follow the exact same steps without opening it through your mod manager and get the same results.
The FPS increases are 0, but now all the textures of weapons and armor have turned into potatoes
, I did not make a backup copy since there were 80gb mods
I do not advise anyone to do this, only if you choose a certain mod for texture compression, BUT IN NO CASE DO NOT CHOOSE ALL MODS
@@ASAG_lockk
Optimizing and compressing your textures should definitely not had such an impact on your textures. If they turned into potatoes after you downsized if because you are using 2k textures or less to start with, so this is not for you.
This is for people with 4k+ textures that also use enb and dyndolod, it will not be a magical solution for very low end PCs.
Sorry that you did not backup, you should always do so when modifying your mods.
really really good video that shows a bunch of options from essential to optional mod fixes for those desperate in need. Best part; it just (actually) works.
Idk.. i just love your channel.. i love your CI and design, awsome images and videos. Always something to take away! Really GJ!
Bro just wanted to say your content is amazing. Noticed you've been having some bumps in subs recently (I'm certainly one) and definitely deserved. Looking forward to more of your videos and this channel blowing up!
Cheers dude! The support has been crazy
Before i try this, i want to say thank you for making this video
For AMD gpu users I highly recommend DXVK. It's a translation layer that converts directx to vulkan. I run Skyrim on RX 6600XT and I wasn't able to max out the gpu usage with only 30-40fps. Now I run smooth 60fps at almost all times. Nvidia and Intel users should probably notice a performance boost too, but I am not sure.
Edit: see my comment below for instructions ;)
Mind giving a little walkthrough on getting that setup?
Yea tutorial?
wow I wrote one but was taken down by youtube twice. What a shitty platform
Your comment doesn't appear in the replies
I have nvidia gpu and it does the opposite
Thanks man i pretty much figured out all the mods i wanna put in my modlist but i was missing this.
Soft! Every time I look at my Skyrim and say to myself “this seems like a good thing to work on today,” you release a video on that exact topic.
It’s always exactly what I needed and always so easy to follow. You’re a saint. I owe you a beer
If you are worried about SSE Fixes not being available for your game version, don't be, because SSE Engine Fixes includes everything from SSE Fixes.
The Skyrim Upscaler not only gives better fps and the Anti-Aliasing looks better via this mod than the options Skyrim supports
yea its worth the $5
I tried it and it won't work with SKSE.
I would actually like to suggest you don’t just show B roll footage unrelated to what your talking about. For example when talking about the upscaling, actually show it off and show before and after. Otherwise your channel could just be audio and the video is pointless
💯% agree!
this is the first time in a long time i've seen someone use the comment section like this. wonderful.
thanks for the video and mod reccomends, using alot of them now and having some good results :D
Shadow boost would do more for you if you didnt use beth ini since beth ini already lowers shadow render distance and quality to a more logical amount more then likely shadow boost isnt doing much at that point.
its insane how much of a difference this makes
We need more video like this!!!
This is the first "third person modlist" that I liked, looks great to play without the exaggerated shaky camera and effects from other modlists.
Thumbs up! This is actual great video for a change. Even though it has been over a year, and the title is a bit obscure. I wonder if there's an actual good video for vanilla users that explains absolutely essential (legitimately) )mods that are mandatory for vanilla users. As in meant only for fixing problems with the game and optimizing it. Without any unnecessary actual non-essentials like qol and other bloat. Most users and beginners only care about functionality, and perhaps graphics improvement in order to play the actual game as it was designed with exception of design flaws (such as glitches that devs have overlooked/ignored). I have not even played the game yet which has recently been installed and dormant, but getting closer to compiling a legitimate list for vanilla with only mandatory improvements on functionality and basic graphics.
"Colorful lights no shadow"
Is another good mod for reducing fps.
Sadly I can't use Skyrim upscaler because my laptop is old but at least the rest of the mods make the game run a lot faster.
gimme a dime for every time this guy says increased performance lol. great video. About to test it and hope for the best
This video is a godsend. Thanks you.
this is helpful for me because technologically, I'm kind of an idiot. I'd just kind of accepted that my game would have lower FPS because I didn't know where to start for optimising performance while still letting it look good :)
amazing video mate
Nice, now I need to know all of your mods.
My modlist is in the description :)
@@SoftGamingOfficial Thanks 😊
SSE Fixes hasn't been needed since shortly after an update for Engine Fixes came along. It supplanted it iirc.
The unofficial patch is sorta a love hate thing for me: the author Arthmoor is an asshole for one, for two many of the changes that mod implements are not exactly “fixes” but things that Arthmoor wanted to be different, they don’t all objectively fix issues within the game. But it hasn’t done anything outrageously bad to my game, at least nothing I’ve noticed. The only reason I’ve installed it is because so many other mod authors have it as a requirement to install their mods. If I weren’t for that, I wouldn’t use it as I don’t use any of his other mods
My Skyrim running smooth now,,thanks
Appreciate huge work.
I am sitting on mediocre setup like 5600xt and I realised that i spend loads of time on comparing every mod with fps difference.
Like you know, every grass/textures/lighting mod compare.
Have you ever considered creating a short list of "fps friendly" mods for graphics?
Though game is old but mods can really burn stuff with budget pcs :D
Cheers!
I've tried BethINI and I was able to cap my fps to 144 from 60! Cheers!
Please note that the dlss/fsr/XeSS mod does not currently work as it needs an update.
*Hey Gents, I came here as a updater for the Skyrim Upscaler mod*
For people that have been paying attention to the Mods updates a features, at first glance it looks awesome to have. You're getting 30 - 40 FPS Boost without sacrificing Graphics Quality, but trust me looks can be deceiving.
As of right now and likely for a couple more weeks/months to come Upscaler does not work properly.
The following results are possible if installed (regardless of correctly or incorrectly)
Immediate CTD upon launch of the game
Graphics Drivers Crash and CTD (Rare occurrence since your GPU stops it)
Launch of the game, yet blackscreen or complete missing textures for the world.
As what was stated above, It is not a good time to install this mod.
So please. Spare yourself the confusion like many others before you and don't install it until further notice.
*DON'T INSTALL IT RIGHT NOW*
Should I do it now?
Great list! Thanks.
skyrim upscaler helped a lot! thx
lord your game looks gorgeous
After installing about half of these, one did not work, and the other 10 or so made no noticeable difference. But, I'm running on Linux, using SteamTinkerLaunch to run Vortex, and Vortex to launch Skyrim.
It is worth noting that upscaler offers DLAA which will not let you play at lower resolution, but will dramatically improve graphical fidelity, works with ENB, and lets you turn off al vanilla AA. I do still see a small FPS boost when turning it on.
How mush fps you got
NVIDIA reflex mod? I need to install this ...great vid man, will help a lot of Skyrim player modding there game... You might maybe concierge regrouping all those mods and make one overhaul mod.
Modding community is amazing but imagine those guys working together....would make life easier for everyone
There is a beta version of the Upscaler mod, works great for me right now
Papyrus is pronounced: puh-pie-rus…you know like the kind of paper the ancients used
Heh whoops! Thankyou Murray :')
Well the ancients didn't call it pa PYRE us, that's the anglicized pronunciation. He's saying it like Ancient Greeks would say it. Papeerus.
Oooooo grammar teacher
True. The Egyptians wrote on papyrus, for example.
@@mithras666 But he’s speaking English, soooo…
May the gods bless you for your entire life, with much thanks Friend 🍻
Wonderful Job!!!!
I was missing a few of these. I installed eFPS, Nvidia Reflex, Rec Monitor, and object remover. I already had most of the others which I feel are mandatory. It gave me 10 extra fps and seems very smooth and crisp. Using Rudy ENB on Ultra settings, with everything in 4k res. I have over 300 mods installed and it runs around 80 - 120fps. Very nice. After installing these I did have one new bug I have never seen before. I loaded into the Ragged Flagon and it had no walls. All you could see was night sky and stars. I restarted the game and loaded the same save and the problem was gone. I'm just wondering if it was Nvidia reflex support. Or something else that I'm missing entirely. Not a big deal since the restarting the game fixed it, because just reloading didn't. Could be just skyrim though, no idea. Long as it's not constant, I dont really mind. Edit: It was an ELFX Shadows bug that got a patch. The problem is no more.
What GPU + CPU combo does you use?
@@masqueradet i7 11th gen and RTX 3060 Ti
@@IKnowHowItEnds Do you get 80-120 Fps even in some of the more taxing areas? Like modded cities
@@masqueradet Yes, I would say that is the average. If it drops it recovers after I take a few steps in game. But this is outside the cities. I get higher frames in the cities and I have Jk's Skyrim all in one installed. I was getting 160fps in Whiterun just today. Cities and interiors run like a dream. I drop to around 55fps on rare occasions in areas with heavy trees and grass. Because I have complex grass for ENB. It has it's own shadows and it moves realistically. Riften forest area hovers around 60-120 fps. I have a G-Sync monitor the Acer Predator 170hz, 1440p so I don't notice frame drops at all. There might be a slight visual difference because you notice 60fps more than you do if it's over 80 frames. But nothing jarring that takes you out of the beauty or immersion. I have over 4000 animations and poses installed with CBPC next gen bodies and physics too and my processor doesn't even feel it. I have so many NPC mods that add NPCs with AI. So much going on in the cities.. I even have enemy faction raids on the cities and towns. Bandits, vampires, etc.. This PC is fantastic. This is the one I bought. www.x-kom.pl/p/735984-desktop-g4m3r-hero-i7-11700f-32gb-2tb-rtx3060ti.html I didnt feel like building one myself this time around.
@@IKnowHowItEnds Sounds good man, then I must clearly be doing something wrong. Because I don't get nearly as much fps while running an RTX 3080. Whiterun is kind enough to give me a measly 45 fps at the gate when entering. Curious as to how the game handles your modlist vs mine.
Thanks for another nice video!!! May i ask, what is the sword, shield and armor mods at 5:37? And what is that sword and shield animation mod?
Any idea why modlist creators would want us to skip the BethINI step? They seem to think it's old and forces you to 60 fps, which the engine fixes should already have unlocked.
The issue with USSEP is that they explicitly do not want to support older Skyrim versions, that for me have been the only way to get certain mods working.
What is ENB and lighting mod for the light view at 8:25?
What's the animation mod your character uses at 3:35
Is it normal that your riverwood looks like a forest because of northern roads ? I can see some origin of the forest plants, i have those mods too and i was wondering if its a bug.
Display tweaks always conflicts with ENB for me and causes weird blue and red tinted shadows. Haven't found a fix
I will be honest with you. A mod list is often not based on the fact that you want to get too much out of it, but on how strong the specification of your machine is. What's under the hood more precisely. The size of the monitor doesn't really matter either, because if you still have an old 4:3 monitor, it won't be capable of 1440. Also, not to get the most out of the given mods.
The SSE is only and exclusively optimized for 16:9-16:10, and as far as I know, there is no mod that can fix this 100%. This becomes a big problem when, say, you download monitor-specific mods. There are only wide screen mods for the game, so you will only suffer through the various repair packages, up to the mods that replace the loading screens. The total performance does not matter how much there is, the amount of ram, the amount of processor cores and clock speed. The amount of vram of the video card and its clock speed.
I could list more. However, it is a fact that the mods you listed improve the game a lot. In my case, quite a lot. The base game is so broken (I mean SE and AE) that it refuses to produce 20fps in open spaces, the situation is obviously different indoors, but it's still confusing. I use most of the mods compressed into a separate package, and whenever I feel like installing the game, I also take these mods from my bookshelf. And overall, the performance improvement is huge. You can have an old computer, even 20 years old, it will be able to run the game with good performance and you don't have to make any compromises. That's all I know about this video topic.
I have stable (locked) 60 fps outdoors (RTX 3060 + i5 10400 16gb RAM 3600 mHz SSD 960 gb) with a lot of trees + grass + Silent Horizons ENB + some visual effects + weather mod + some additional NPC +cosmetic mods (for NPC too). But I still have some fps drops from 65 to 50 or even 40 while I'm looking at some directions. It happens in certain areas like when I'm standing in the fields near Whiterun and looking at the Khajiit camp or stables 🤔 In Fallout 4 I have installed heavier mods, and I have more fps there without any drops. So I think may be it's an engine problems, which can't be solved with mods? I don't think it's my pc problem 🤔
Same. Riverwood bridge, Dawnstar and Whiterun stables: 38/40fps.
what’s the ronin looking armor mod you have for the thumbnail if i may ask?
i recommend gras fps booster, my game became so smooth when i installed it :O i play on wildlander
Thanks brother
Can anyone tell me exactly how to setup SSE display tweaks? Everytime I install it and no matter what settings I use it causes weird visual effects such as red and blue tinted overly bright Shadows and weird outline and bloomeffects on smoke in the main menu and in-game. I've tried it both with and without ENB and yet anytime I display tweaks it's significantly harms my game's visuals and I cannot figure out why. I've tried uncapping the framerate by other means but the same thing happens
How do you make your game look so clean and natural? I'm constantly messing around changing between enb's and settings but never manage to make it look that good, there's always something off either with the colours and lighting
What are the rain, water, and plantation mods that you used in this video?
Anyone know what the fur armor is you are wearing in the beginning of this video ? Searched the comments but no one mentioned it.
I appreciate your videos very much! Could you make one about making animals and creatures better?
How to you get water/land transitions so smooth? I always get a big harsh transition line
Hmm have you got landscape and water fixes? Or maybe it's your load order
@@SoftGamingOfficial I only put RW2 in my load order. What else should I get?
Ah ok. Landscape and Water fixes is actually a mod in itself. Gonna give it a try
@@brucemooney1277 mmh… I don’t think that mod will help you that much for your problem…unless it got updated since i last check it. If you use an ENB your best bet is to tweak the water section, especially increasing the caustics. (You can see it in this video also, near the shores: the more the water is shallow the more caustic is visible giving this whitish tint and hiding the transition line).
I installed latest 'papyrus tweaks' and 'INI file for reference' but when i open it, it's not readable(strange signs) what did i do wrong?
it will be good if u make nexus/vortex collection
I know you have a graphic overhaul video but can you please explain how your game is look cartoonish what is the core mod or mods?
i hate that they put the purge button right next to the deploy button... ive almost ruined myself multiple times now
Whats the lighting mod you're using here? looks really good
can the GTX 1650 still use the Upscaler?
U cant usz dlss but fsr can gain u some fps
this video helped me ALOT... but like... at the 4 minute mark... that is a MASSIVE chicken.
Why is the image quality on this video so bad ?
Whats the name of the armor mod we see throughout the video?
Hi its from the BDOR complete pack by Kirax
I find when I'm in open areas the game will lag especially if I turn around fast. My FPS is high most of the time (144 indoors but varies outside).
Papyrus Tweaks isnt creating a .ini file for me. Is this happening to anyone else?
what’s your enb and textures you’re using? that looks very good
The problem with USSEP if you are in 1.5.97 you are stack in its old unsupported version of the mod
I believe if you downgraded using best of both worlds patch you can use the supported newest version of USSEP
How is that a problem? It works fine for me and I’m on 1.5.97 .
Can someone please help me understand how to install "faster hdt-smp"? There are like 6 requirements but they also seem optional aside from NPC Crash Fix and XP32. Sorry I'm not even new to modding but this one is giving me a headache for sure.
Hey could you do a DLSS on/off etc. comparison? thank you!
Anyone else have a black screen when they load in? Anyone know how to fix it?
My real problem is with water and weather events. I'm using Water for ENB and Obsidian Weathers with RudyENB. Since my machine is dated already, I wanted a good looking yet good performance enb. When I get to waterfalls between riverwood and whiterun my fps drops from 60 to +-30. It also happens in rain or snow storms (rain is worse than snow).
Thanks for the video, I'm gonna test those. The essentials I alrady had, but let's see if the extras are going to help. Specially the one that helps with the papryus scripts, I'm already over 280 and 250 plugins, sometimes the scripts can... welp.
Im in the exact same boat. Floating around 35-50 fps the low end happening during weather or at night
What lighting you're using my Skyrim is dark
why are the chickens so THICK, great vid i will definitely use these mods
Are most of these mods usable for modded Enderal?
Can you say what mod you use for water 2:25?
Water for ENB and I selected the teal option
Man help me out please. I installed a few of these and now wherever I walk, none of the object or npc assets are loaded. I get to a town and it can take 10 minutes for lods to disappear and the town to show up. I’m like 60 hours into trying to fix this and I haven’t progressed a single inch. There’s just nothing about this issue anywhere. DynDOLOD uninstalled as well as anything that touches occlusion. Just straight up broken and it was perfect before I got the idea to get some of these mods.
Hmm never seen that before. It could be the shadow boost mod as it touches load distances, try uninstalling that one. Also you shouldn't be uninstalling Dyndolod mid game
@@SoftGamingOfficial Can you think of any settings anywhere that modify how much memory Skyrim can use?
@@SoftGamingOfficial And I'm experienced enough to know to definitely do this on a new game haha. I fixed this exact problem with Cities of the North Falkreath a couple weeks ago and I fixed it by removing a duplicate patch that Nature of the Wild Lands came with. But I can't have two files trying to edit the whole world simultaneously now like that so idk.
Can you also share your armor and hair mods used by this character at 5:05
i know i’m late but wind ruler armor
Hey man great video. Mind telling me what's your performance like with the rtx 3070? What res do u play on also?
Which water mod are you using?? Looks so good
Water for ENB
@SoftGamingOfficial ah drat, I am new to modding and don't have ENB. I'm contemplating if my laptop can handle it.. it only has a gtx 1650.. what do you think?Anyway, thank you for the guide!
Which Version of "ENB Complex Grass - Patch Compendium for various grass mods" are u using? The Folkvangr for ENB Complex Grass version or? And nice Modlist :D
Hi :) the QW grass patch 2 complex grass patch
@@SoftGamingOfficial Thanks for the reply :) Should i install the 2k version of all mods or 4k version? I play on nativ 4k
What version did you use for the cleaned skyrim? The pre 1.6?
This is weird. I use default graphics card on my pc. I get like 100+ frames playing tf2, so I think I have a good pc. I play Skyrim and it drops to 20 and below. I have a lot of mods… but that’s really weird. I run my game 1024 x 768. I’m thinking it’s because of how simplistic tf2 is… maybe because of the simplistic cartoony style it doesn’t have to render too many pixels? If I replace my textures and cell shade it or something will it fix itself? Currently I’m trying everything because I have a little time before spending $600 on a good graphics card. It’s kind of maddening how it’s the same kind of 3d environment but for some reason it’s so different. I’m gonna post an update on anything I found… hopefully I’ll help people with the same problem.
whats the Japanese armor mod you're using?
Does SPO work for the AE version of he game?
Hi, what ENB are you using ?
@SoftGaming can you tell me what is the sword that you're using in this video? I think it looks cool bro. can you share the name of the mod?
its called Ilieh - Cry of the Damned
What was the armor mod that you were using in the video ?
Its from the complete BDO armor pack by Kirax