ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Foam is lightweight and wants to float on top of the cement slurry. The foam injector puts the foam directly into the mixing paddles at the bottom of the barrel. It’s much easier and faster to make aircrete with our foam injection mixer.
Good idea. Thanks for sharing.
I love love it!
Hi! I really want to build some of these! How can get the plans and any tools that you may have available?
Great idea👍👍
Where can I find (buy) the plans?- both the mixer/injector and the molds? Great 👍 demo!!
Domegaia sells the tools, not the plans. They're not ridiculously priced, though. Their goal is to make the technique accessible, so cost is an issue.
@@CR-xl7zu I asked ‘cause I’m overseas and shipping may turnout to be complicated and expensive.
@@PeterWest70 That makes sense. I know there are DIY builds on TH-cam that look like they work well. Some require an air compressor, which may be a problem. There's nothing magic about the mixer that I can see. It's an off-the-shelf model with the PVC added. That plumbing puts the foam right into the mix at the beater, which probably keeps the bubbles from collapsing too fast, so it's worth adding.
That said, Domegaia has done classes all over the world, so it's possible they have contacts where you are. It'd be worth asking them, I think.
I want this system
I would recommend looking at this bundle www.domegaia.com/store/p155/littledragonmixerdiscount.html
How much is the bag of cement for you? And how mucha water? Thanks
94lb back of portland cement
how much air pressure is needed ?
around 50-60 psi with about 2.5 to 3 CFM
Where topurchase large mixer.
We didn't use all the foam and had to stop because the mix was to the top...what should we do? Lower foam pressure or?
The mix dried soft not hard.
No need to use all the foaming agent. 5 gallons is enough to for nearly 80 gallons of Aircrete. It takes several days to fully harden but you should be able to work with it carefully the next day.