Struggles with a Vito B, part 03

I struggle through servicing a Voigtlander Vito B camera, continued.
Consumables used:
I use naphtha (cigarette lighter fluid) for cleaning metal parts. CRC Heavy Duty Lectra Clean for dried grease that the naphtha won’t dissolve. A generic wax and grease remover to soak mechanical parts prior to cleaning in an ultrasonic cleaner. Glass cleaned with normal domestic glass cleaner.
Parts are lubricated with a synthetic grease, Inox MX6, Rocol Dry Molybdenum paste, MicroLubrol Helimax XP helicoid grease, or graphite grease as needed.
Leatherettes are glued back with Ados F2 adhesive.

[@johnm2012]

Thanks for reshooting the section that was lost.

[@ARovenko]

Thank you for such a detailed walkthrough, it's great to have this reference!
One small thing that seemed different from my original shutter assembly - the little tab that is being installed just past 14 minute mark - on my shutter it was the other way around, ie end with the hole goes on the pin and the end with the fork gets screwed on. This way it seems to sit more naturally (rather than fork being very tight on the pin). Thanks again!

[@TheMotorEddy]

Agreed - if you look at 00:05 in part 02 of this series, Chris's Vito detente tab is just as you describe.