It totally looks like trash, 0% skill to rip grip tape up and put it on a board with gaps everywhere. I agree that making the gaps all fit would've made this wayyyyyyyy better
Bro griptape cuts are like the gnarliest paper cut you've ever had, I was always spooked when following cutting it w the razorblade after a couple bad ones
Hmm, not sure how I feel about this. The gaps were pissing me off initially , but once he trimmed everything it looked a little better. Is clear griptape still trash?
If you flip the clear grip tape upside down and put it on the black grip tape and then tear them both at the same time the tear will match up when you flip it 👌
It's cool to see this clear grip now I remember as a kid we would either trace and cut it the spot or leave a line gap that would show the work on the board
I grew up watching Eli Williams do this stuff, he would be at hazard the whole day gripping his board and being a cashier. He did more of the lava look tho so super small pieces everywhere
Skate was once i what i call punk, and all of our opinions on the matter don't matter. You do you dude skate on. Personally I thinks it rad, and everyone else is so ego perfectionist about a concrete shredding device. But just like everyone, my opinion shouldn't matter on your project. Have fun dude!
All the cuts make the grip easier to get messed up and there's too many holes it's gonna get nasty quick. The only thing impressive about this whole setup was the cut that shit was straight and clean as hell
I've been skating since 89 same board and same grip tape. The older version lasts the newer more recent type is just sandpaper with tape backing. Don't fall for the b.s. keep it original.
I don’t think people realize the gaps are suppose to give almost a lightning strike effect, it’s not because he didn’t make sure they lined up or whatever, it was intentional 😂
I’ve seen a few of these videos with the same “free hand approach”. I was hoping that this one would be nice for a change. But consistency it hard to beat…
I took my like back. It’s my fault. I see something I’m interested in and give it a quick like. Then the final presentation determines whether I leave it, or in this case, take it back.
Atleast rip the grip tape to where the clear and normal line up correctly. It looks hideous with those gaps between the grip tape
fym it looks hideous, it's cool asf
@@MinorityHunter516 I agree 💯
It totally looks like trash, 0% skill to rip grip tape up and put it on a board with gaps everywhere. I agree that making the gaps all fit would've made this wayyyyyyyy better
@@MinorityHunter516get some standards
Agreed, gaps or not, this looks trash.
I’ll lie to you, this shit is fire 🔥
😂😂😂
🎉❤😂
Lmaooo
Hating on peoples boards is weird ngl
@ I bet your board is worse
Pro tip.. if youre gonna use 2, stack em and rip em together. That way the rips line up and dont leave those ugly gaps.
w tip im using tht
They won’t be the same as it will be flipped
@@TheTretzoOnly if your a crazy person and stack them wrong before ripping them...
I think the gaps were intentional in this one
.....nah, believe me, that tip doesn't work very well, Ill try it several times and doesn't run the cut as you need
We have very different definitions of “masterpiece”. But I mean it is a piece of something that’s for sure
Underrated comment 🔥
💩
with all my respect this work is wack as f
Well with all due respect, some of your passions are probably stupid asf too
LOL😂That's what I also thought, then I checked the comments and this was the first comment I saw so I had to reply.
@@e.rodseb.8734that's what I thought so I checked the comments and saw your comment so I had to comment
Agreed. Why make it look janky af?
I didn’t wanna say it 😂
Doesn't show us the finished product? Thank you.
It’s not like we would want to see that anyway 😂
He probably regretted it
It was never a finished product. Got scrappe bfore the trucks went
bubbles under the clean paper killing me,,,,,,
Right...OCD sucks!
Did you make it so shitty so people would comment?? Thats diabolical
😂
Masterpiece is a wild word to use
The piece part is correct 🫡
0/10 🤮
What a tear-able job
Nope. Other than its distracting. Its a piece of crap. Theres little to no effort given to this. I feel sad to whoever is gonna ride this.
Y’all need Jesus.
guy grips like a zumies employee
This is another reason why I would grip my own board.
I don't skate, but I can watch grip tape videos all day
Nobody could duplicate that professional work
Did this to my skates before
FUN!! Plus fun ride n them 😂
He knows it didn’t look good, didn’t show finished product lol
You do you...i think if i pulled this in the 90s my friends would of beat me up, thank god i had good friends...
My ocd is SCREAMING rn
I just took a masterpiece in the bathroom myself. Looked very similar
I think it looks cool with the kinda ripped looking pattern
Gonna look some cool when it all starts peeling in 2 days.
@@DVS_MAGGOTget half decent grip tape
Putting together a new board is so therapeutic 🥰😮💨😎
I think it looks really cool, wish I could see the fully finished product. Fuck the haters who cares about a small gap
This guy is special for sure
“I’m so quirky🤪” ahhhhh grip job
Im a fan of the gapped look...everyone hating on it just aint realizing it aint their cup of tea, but dont mean it aint someone elses. I dig it🤷♂️
maybe tear them at the same time so the tares can be exactly the same and match up
im gonna lie, this is fire
Those two smaller pieces are gonna come off after a few flip tricks..
The deck is pretty clean 👌
Bro griptape cuts are like the gnarliest paper cut you've ever had, I was always spooked when following cutting it w the razorblade after a couple bad ones
Yee cause that fuckin grit will get in the cut.
Love the welcome deck I have 3 🔥
Ok i was skating in the early 2000s and i have never seen clear griptape, very cool
Herkesin aynı fikirde olmasına sevindim, zevksiz olduğumu düşünmeye başlayacaktım😅
Ah, hooking up a fresh new set-up!!!
I love getting the board G'd up!!!
Hmm, not sure how I feel about this. The gaps were pissing me off initially , but once he trimmed everything it looked a little better. Is clear griptape still trash?
My brother in Christ, just put the grip on and shred it
“Everyone’s so creative”
Everybody’s so creative
I almost set my internet on fire watching this
Are Canadian Maples still around? We’d buy those by the bundle and they were very decent boards!
So damn satisfying.
Masterpiece my a$$ lmaoo 😂
We did this in the 80's all the time. Came up with crazy grip designs
I won’t comment on the shotty job, I will comment on the red finish… shits dangerous man
If you flip the clear grip tape upside down and put it on the black grip tape and then tear them both at the same time the tear will match up when you flip it 👌
It's cool to see this clear grip now I remember as a kid we would either trace and cut it the spot or leave a line gap that would show the work on the board
You only need one tool to apply grip tape. A truck with one wheel missing. 🤘
Hit em with the ol 'rip it and grip it' 😂
Clean ass grip job and deck
I grew up watching Eli Williams do this stuff, he would be at hazard the whole day gripping his board and being a cashier. He did more of the lava look tho so super small pieces everywhere
Even though it's a troll it's more unique than most of you cookie cutter skaters nowadays lmao
It's definitely not but nice try. This must be yours
To each their own i guess
Who goes out of their way to get any candy tho? Deadass convinced this man hates candy
In the eye of the Beholder...
Skate was once i what i call punk, and all of our opinions on the matter don't matter. You do you dude skate on. Personally I thinks it rad, and everyone else is so ego perfectionist about a concrete shredding device. But just like everyone, my opinion shouldn't matter on your project. Have fun dude!
I hope you didn’t charge the kid
All the cuts make the grip easier to get messed up and there's too many holes it's gonna get nasty quick. The only thing impressive about this whole setup was the cut that shit was straight and clean as hell
This reminds of those artist videos where they just throw paint at a canvas and call it high quality art 😂😂😂
Masterpiece is a bold word
What a waste of grip tape
Such a great outcome they didn’t want to reveal it 😂
Skating culture used to be broke AF we only re-taped when we absolutely had to and there’s no way we would ruin multiple tapes to get the job done
“Masterpiece” and of course welcome
I cant believe the cameraman actually paid for this.
I was like “is this even a trust the process?… “
No. No it wasn’t
This looks like when I didn't have enough to buy new grip so I pieced together the scraps.
Is that clear grip tape I am new
I've been skating since 89 same board and same grip tape. The older version lasts the newer more recent type is just sandpaper with tape backing. Don't fall for the b.s. keep it original.
I like it the gaps won’t make a difference
I don’t think people realize the gaps are suppose to give almost a lightning strike effect, it’s not because he didn’t make sure they lined up or whatever, it was intentional 😂
Still looks like shit
That grizzly grip is some rough stuff. Ate like 2 pairs of shoes easily
This comment section is the result of kids making this sport a fashion show smh its supposed to look rough princesses 👸
Nah this is tough bro
Absolute 🥯🥯🥯
Bro picked the wrong profession and is happy about it
Is grip tape sandpaper?
My ancestors also used every part of the grip tape
That's cool bro
RIP THE DCLEAR AND DARK GRIP TAPE AT THE SAME TIME AND OYU SHOULD GET A CLOSE TO THE SAME TEAR JUST MAKE SURE IOTS NOT BACKWARD WHEN YOU APPLY
Breaks it 10 minutes later on a 2 set😅
Knees buckled in a good way.
Sorry man, i’m obsesed with perfection
I watch that whole thing and you ain’t even let me see the finished product…
This tape job is wack but that invisible tape is rad
I’ve seen a few of these videos with the same “free hand approach”. I was hoping that this one would be nice for a change. But consistency it hard to beat…
That gap would drive me crazy
Landlord special ✨️
People have been doing this correctly for years.this is like it's your first time trying.
Está dela mierda
I took my like back. It’s my fault. I see something I’m interested in and give it a quick like. Then the final presentation determines whether I leave it, or in this case, take it back.
12 years ago we used to call the people doing this "posers", funny how times changes. Altho i still think it's for posers
Wow what a masterpiece wtf
It would have been nice to see the end result for a bit.
Hell yeah push the sticky side of the grip tape away while you make your holes for your trucks 😂
Это очень полезно и поучительно, многим пригодится! Ведь именно для этого создавался ИНТЕРНЕТ!!!!!
the ripped parts would fit perfectly if you ripped both simultaneously by stacking them.
スケボーのヤスリみたいな乗り面って貼るんだ!!
初めて知ったわ
Fuckin' Welcome decks are dope!!! The mix with black and clear grip tape is cool, but it aint no masterpiece 😁🤙🙏