Rebuilding appion g5 twin recovery machine. Neglected and abused

In this video I thought this was going to be a standard piston rebuild. After opening the machine it was revealed there was a lot more damage to the machine then just needing to be rebuilt. This is what happens when a company provides tools and employees don't take care of the equipment.
Rebuild kit used in video is a KTG520

[@juniormint3136]

Appion revised the fan/gearcase assembly. You can tell bcuz the fans are blue plastic. The clutch sometimes strips out.

[@ryans5473]

they were grossly overtightened because they put blue thread locker on those allen bolts

[@jimbojones806]

The G5 twin does not use oil, the leaking oil must be from the system and they are reclaiming oil and it has hammered the pistons and heads

[@daledoe7711]

Should have the abusive employees spend the Saturday evening at the bosses house help rebuilding them, while you express your Disgust in equipment condition

[@Itsjustbriz]

Watched the video. When disassembling my machine the copper seal / gasket that goes between the machine and the piston cylinder was cracked and broken. There were 2 of these together. The kit does not come with this seal. Where is it available?

[@kswitch87]

Have you found them yet? Mine are broken as well and nobody has them listed

[@Hammer757]

you can get appion cylinder shims at www.centurytool.net/Appion_G5_Twin_s/16907.htm and at www.trutechtools.com/

[@SombraLocs]

How much does the rebuilt kit cost? I got one that leaks oil.

[@kswitch87]

Anybody know where to purchase the copper o ring?