etrailer | Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent Spec Review

Click for more info and reviews of this Ventline RV Vents and Fans:
www.etrailer.c...
Check out some similar RV Vents and Fans options:
www.etrailer.c...
Click for more info and reviews of this Ventline RV Vents and Fans:
www.etrailer.c...
Check out some similar RV Vents and Fans options:
www.etrailer.c...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.c...
Today we're going to be taking a look at the Ventline Replacement Dome Assembly in white, part number BVD0449-A01. It's also available in smoke, part number BVD0449-A03. This is going to be a direct replacement for the lid on your model number V2092, V2094, V2119 and V2128, Ventadome Roof Vents. It has the same web shape and it's made out of the same polypropylene material. Over time your lid may crack, break or fade. We're going to show you how to replace it. Now of course this will be in your RV, but for demonstration purposes, we're going to show you right here.
We'll flip it over and this will be as if we we're looking up. First thing we want to do is go ahead and remove the screen. We've got these little tabs surrounding it. We can actually just push those out and begin taking it off. All you're going to need for this job is a Phillips-Head screwdriver. Let's go ahead and take off the knob.
Once we get that screw loose, we can actually just pull up on the knob just like that and set it aside. For our tray here, we just need to push in on each side inward. We've got some teeth that we need to get around, but then it should just pop right on out. You can see the two teeth here. Then we've got our switch. If you'd like you can disconnect it, we're going to leave ours attached.
The other two wires here will be connected to your power in your RV. Then we can grab our Phillips-Head screwdriver again and we're going to remove our arm assembly. Now we'll need to take these screws all the way out. With those loose, it's going to allow us to remove our arm from our lid. We can just slide it off like so and just kind of leave it set there. Then it's going to allow us to remove our lid from our vent assembly. Now this portion will be on top of your RV.
You can actually lift up on the non hinged end of the lid all the way up and then take it off. We can grab our new one. We'll locate the hinge side, go ahead and turn it over, line it up and then turn it over like so. Now we can go back inside of our RV. Back here on the inside we can reconnect our arm assembly. We'll just need to slide this on to the portion right here just like that and then position it over our holes. I've gone ahead and reinstalled my other components. Let's go ahead and test it out. I'd say it's working pretty good. That's going to complete our look at the Ventline Replacement Dome Assembly.

[@assistantprepper]

etrailer puts out the best most helpful installation videos in the world. 👍

[@etrailer]

Awww shucks, thank you very much. We truly appreciate the kind words!
www.etrailer.com/RV-Vents-and-Fans/Ventline/bvd0449-a01.html

[@pikesticker]

Just needed to replace the dome which had some cracks from a tree branch. This was just the video I needed for the sequence. Thanks.

[@etrailer]

We are happy to help! Check out the following link to see this vent lid on our website.
www.etrailer.com/RV-Vents-and-Fans/Ventline/bvd0449-a01.html

[@jackparker6312]

How to replace the same product that has clips holding the vent cover on

[@894crumvoc]

Same here