ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Please watch: "DIY: Installing a LOFRANS X2 anchor windlass on your boat #lofrans #windlass"
• Video -~-
Hallberg Rassy 312 "Ellös" - Sea4See: The restoring project (DIY SAILBOAT)
Good morning everyone for you the brand new fresh episode of the series "Restoring an Hallberg Rassy 312". The installation of the hot water boiler with Corian supports and installation of the water level in the restored tap water tank but much more in the video ...
If you like my video, leave THUMB UP and happy to get your comments I will reply to you!
A hug Gabriele
➡️Many thanks to Toptech Solution and Franco for his immense support and sponsor me:
www.toptech.it/
➡️Many thank to Stefano Moretti & Luca Caironi of Lineastem for support and sponsor me, if you need a new teak deck do not hesitate to get in contact ,they have excellent prices and professionalism at the top, here the website link and contact infos:
stemnautica.it/...
➡️Many thanks to Ennio Prase owner of Prase Media Technologies distributes products for the audio, video and digital signage sectors in Italy include Shure Mics and many other top products, check it out..
www.prase.it/
➡️Thanks for support me and my project also to:
Joakim of Batsystem for light and electric stuff:
www.batsystem.s...
➡️Many Thanks to Stefano Finco owner of Armare Ropes and Tiziano, among the leading companies in the sector of nautical ropes, offering a comprehensive range of technologically advanced products.check it out!!
www.armare.it/en/
➡️For epoxy resin and all stuff related Mr. Marco Cecchi, a master of knowledge and best products around!!
www.cecchi.it/
➡️For all related to sanding... the best products around check it out:
www.siaabrasiv....
➡️For spare parts for my Hallberg Rassy... thank to Ludwig at Hallberg rassy Parts!
www.hr-parts.com/
➡️And off course many thank to Marco Potente, to give the permission to use his music in my videos. He is probably one of the most talented musician and producer 🎸 !!.
I will forward the website where you can download the tracks for your videos or project. Stay tuned!
audiojungle.ne....
------------------------------------------------------------------------------------------------------------
➡️ About ®Sea4See - Official: Sea4See ⛵ was created with an aim to share my sailing life experiences and knowledge, especially restructuring sailboats. In my youth I worked in a factory where they built kayaks made by fiberglass so.. learn a lot regarding. In my off days from work, I have worked for a long time in a shipyard, further benefiting my knowledge and enhancing my sailing, boat maintenance skills. Today through my sailing vlogs on TH-cam, I want to share my sailing stories, sailing lifestyle videos, sailing adventure with all of you. I love working on boats because i belive that all boats have a soul...
More info...www.sea4see.org....
➡️ About Gabriele: Hello friends my name is Gabriele and I am an offshore Yachtmaster. A yachtsman who is passionate about everything related to the sea and sailing lifestyle. After having sailed in the various seas of the world, I bought my first boat and then refit her and later I left for a sabbatical year sailing through the islands of the Mediterranean. I am passionate about DIY in sailing boats and now after selling Dreamer which was my first boat, I am restoring "Ellös" a Hallberg - Rassy 312 that will take me back to the seas of the world..
Read more about me www.sea4see.org...
➡️ About My Boats: The Hallberg - Rassy 312 was built for fifteen years between 1979 and 1993. Totally 690 boats were built during this time period. The HR 312 was a very popular model. Until 1986 the Hallberg - Rassy 312 Mark I was built, with the portlights in the blue stripe in the hull and with or without quarter berth. Models without quarter berth had an extra cockpit locker on starboard.
Read More..www.sea4see.org....
___
⛵ Important Links ⛵
___
☑ Subscribe ®Sea4See - Official on TH-cam: bit.ly/Sea4See-...
☑ Follow ®Sea4See - Official on Facebook: bit.ly/Sea4See-...
☑ Visit ®Sea4See - Official Website: www.sea4see.org/
☑ Follow ®Sea4See - Official on Twitter / sea4see1
☑ Follow ®Sea4See - Official on Instagram / sea4see
☑ Join ®Sea4See - Official Affiliate program www.tubebuddy....
#Sea4See
#Sailing
#SailingVlogs
#SailingLifestyle
#SailingAdvantures
#SailingChannel
#SailingVideos
#SailingLifeVideos
#SailingVideoTH-cam
Category
People & Blogs
Music by Bensound
"I have a license or written permission from the proper rights holder to use this material"
➡️Visit www.Bensound.com
Nicely done! Best wishes and thank you for the great video.
Thx a lot mate!!!
Gabriele, There are many times when watching your projects I say to myself "Stop now, that's a good enough job!" but you keep going and do an even better job! I guess you can't hear me saying "Good enough!" lol I do agree with others who say you are making your older boat BETTER than new! Good Job! Scott W
Ah ah Scott!! You notice my improving English on the past verbs? I cut a lot video until I say the correct verb!!!!
Gabriele, I noticed one time you said the ED instead of d(a). But I heard "ed" said correctly one or more times! Good Job! But there still is a time when you can say Glue Ed. That's when you are about to glue your friend Edward to something. As in - "I will now glue Ed to the deck of my boat since he is afraid of falling overboard." : - ) Scott W
Franco workshop is awesome 👍
Hey friend!! Quite great workshop I’m very lucky!!!
Fantastic details. Complimenti. Better than new.!!!
Grazie Georges!!!
You could be the Quality Manager at Halberg Rassy. Excellent work.
Ah ah ah Andrew!! Thx for your advise I will forward to hr and try to apply !
All your friends are professionals! Nice handcraft as always!
Hey Doc!! Nice to hear from you again!!! Yes great friends help a lot!
Enjoying the build I appreciate that you buy the best product available for your boat well done
Brad more you spend for better quality stuff less you spend in the future.... probably is also your idea!! Thx for write me!!!
Gabriele again an amazing job on your boat! You are so fortunate to have the assistance of your very talented friends to help you with so many of the small details. Of course your choices to have everything done to such a high standard are amazing. I do not think any boat factory would take the time and effort to cut out the sound insulation and to place Corian blocks for spacers to mount the water heater. So your boat will be better than a new one from any factory when finished!
Ciao Ben! This is true great talented friend I’m always try to learn from them but still faraway.... try to do the best....
Stellar progress and quality work.👍😀⛵️
Thx Norman! Nice to hear from you
Making the fiddles for the cockpit box was amazing. I think I could do that too. It would require about 100 feet of prime teak to allow for all of my mistakes and six days labor. Two of those days would be spent in therapy trying to understand why I didn’t just fly to Italy and have your friends do it for me. Sweet angle cutting. Pretty.
Hey Bruce ! Happen to me normally I made 4 for one correct!! As usual... Franco one shot and ok....
You always do the best with the best materials, and the best results. My compliments sir, Regards, Solomon
Ehi Salomon ! Nice to hear from you!!! Thx for appreciate!!
Keep up the good work. Always look forward to your videos. Cheers!
Thx Sean for your comment and for your appreciation!!!
Great way to start a Monday morning Big G! Thank you!
Thx David!! I’m on the boat just now and filming the new video....
@@sea4see So is that hot water heater a tank that holds hot water or does it provide hot water on demand? Tankless? I realize that is a tank but really don't know much about the tankless options that seem to be more popular in Europe not so much here in the states.
David the water heater has 20 litervtoy. An warn by electric of marine supply or by engine is a hot reserve that you mix with the cold water of the main tank is a close circuit
great job .love the attention to detail.
+john brown thx for write John!! Appreciate your comment
Hi greetings from Ecuador
Thanks for you heard videos
Please can su explain about resistence and both thermostat in a heater isotemp thanks
Hey mate what you want know ? This detailed information is possibly to find in the manual download from the website. ..
I thought that you might be interested in the episode of RAN Sailing #187.....at the Dusseldorf boat show. Part of the video is touring of some of the Hallberg Rassy models and a bit of conversation with Mr. Rassy. These are beautiful boats, as is the case of Elios and your refit. Attention to the small and large details is gratifying to see.....
Thx friend for sure I will have a look at that episode! Those boats are quite well built need to maintain the standard
muy interesante, pero me gustaria tener opcion de idioma español ya que no domino el ingles. gracias
Ah ah ah Maria!!! Would like but didn’t speak Spanish!!! I can speak Venetian language very close to Spanish one....😜
What kind of seacocks are those with the blue valve? Thanks so much for the great video
Thx Mate the valve are the “Alex” made by Guidi the no stich one the best on the market imo
Thanks for the great video! Couple questions: What is the point of scratching thread of hose nipple?
I can see that thru hulls for cockpit drains are located in engine room but where the hoses from deck drains are leading? Does they have own thru hulls?
Hey Heikki, the little scratch of threads avoid the hemp fiber to turn when you turn the fitting and it stay in place, yes the cockpits drain has their own seacock inside engine room 1-1/4 size with no stick Guidi valve.
No holding tank??
Shit is organic chemical no. 😜 too much effort to make a holding tank if I need I will use a porta potti
Grazie mille but your video are to short :p
Ah ah ah too long take quite long time to edit...
Sir! You are not building a Piano.
Yes you need to consider it. Best you do less problem you have in future and nice installation is shine for my eyes!!!believe me