👉 Order the F1 ULTRA here: bit.ly/F1UltraUSA US Store : bit.ly/F1UltraUSA EU Store: bit.ly/F1UltraEU UK Store: bit.ly/UltraF1UK CA Store: bit.ly/UltraF1CA DE Store: bit.ly/F1UltraDE FR STore: bit.ly/F1UltraFR 🔥 xTool Exclusive discount code for $80 off: CC10
Работать на 100% мощности не стоит. Во первых - 20 Вт - очень хорошая мощность. Те, кто профессионально занимаются гравировкой на волоконном лазере, выставляют мощность на 75-80%. Не более. Чем выше мощность, тем быстрее лазер выработает свой ресурс. И максимальная скорость гравировки в пределах 1000-2500 мм/сек (сканатор тоже надо беречь), а больше и не надо 😊. Берегите оборудование и будет вам счастье🎉
Thank you for the video. I miss the 3D surface engrave. From xtool day said it goes up to 45 degrees. Would be nice to See IT on a Tumblr or a wineglass.
My idea was to created jig where I can place the wine glass and just engrave a name on the site without using the rotary. Put in a glass, push the button, Put in next glass , Push the button and so on. Because it will save much time if I do not need a 360 degree engraving.
One thing not talked too much about this unit, is the open concept cover. The lack of an interlock closure system makes this classified as a Class 4 laser, which if you are in a business that OSHA is regulating, it is a real headache to use the machine "safely". Pretty much have to have it in a locked room with no windows operating by itself, blinking entry lights, a bit of stuff if you look it up. OSHA Technical Manual (OTM) Section III: Chapter 6 lines a lot of it out.
@@paulrivera5049 Are you trying to say tattletale? Isnt a Narc associated with drugs? Naw, I just work at a facility that has requirements and its something people outside of hobby lobby have to consider.
Can the F1 or F1 ultra engrave on gold plated stainless steel? I'm looking to engrave photos, such as portraits of people, on gold plated necklace pendants. Which would you recommend for this use case? Thank you in advance!
Both will work honestly. F1 will be much cheaper for you and for what you want. F1 Ultra will do the same but much much faster and be a little more flexible.
Ummm... Not the "First". The Sainsmart Z6, is. That said, can it cut metal? I would LOVE a laser that can cut 1/16" brass/copper/stainless (any of those)
Way to expensive for what it does. After owning 60w fibers and C02 galvo lasers I can say that thing is way to slow. As far as making money the market is to saturated now and that laser is to slow and not cable of the money jobs. Its a toy for at home at best.
I'm have the D1 pro and looking to get this for my shows to be able to do things on the spot at shows and to also be able to do batch items with the Conveyor. Great video can't wait to save up and get one
You will absolutely love it man. I have been using mine since I got it!!! I think it’s a well rounded investment and tool for people who are going to put it to use.
Great video thanks. Have you managed to get a black mark on steel where it’s does not actually engrave? I believe it’s called xmarking and also can it white engrave on steel?
4000+ euro, thats even way too much for just a side hustle. Wish you would do more woodcarving videos, those laser machines are not affortable for beginners 😀 thumbs up for the old woodcarving videos 👍
Ordered the F1 Ultra today from your link. Thanks for the extra savings. Love your channel. This will be a great addition to my F1 and We Creat Vision Lasers. Can’t wait for delivery!
Also! I like to use a heavy bodied black tempera on the metals to engrave, it makes it black and more visible, can use higher speed, and the resource is cheap and accessible. Clean up is quick too!
👉 Order the F1 ULTRA here: bit.ly/F1UltraUSA
US Store : bit.ly/F1UltraUSA
EU Store: bit.ly/F1UltraEU
UK Store: bit.ly/UltraF1UK
CA Store: bit.ly/UltraF1CA
DE Store: bit.ly/F1UltraDE
FR STore: bit.ly/F1UltraFR
🔥 xTool Exclusive discount code for $80 off: CC10
Работать на 100% мощности не стоит. Во первых - 20 Вт - очень хорошая мощность. Те, кто профессионально занимаются гравировкой на волоконном лазере, выставляют мощность на 75-80%. Не более. Чем выше мощность, тем быстрее лазер выработает свой ресурс. И максимальная скорость гравировки в пределах 1000-2500 мм/сек (сканатор тоже надо беречь), а больше и не надо 😊. Берегите оборудование и будет вам счастье🎉
Awesome video Matt!! All that work paid off. Keep them coming Bro.
Thank you bro! I appreciate you!
Can this machine cut metal?
Thank you for the video. I miss the 3D surface engrave.
From xtool day said it goes up to 45 degrees. Would be nice to See IT on a Tumblr or a wineglass.
Great suggestion!
My idea was to created jig where I can place the wine glass and just engrave a name on the site without using the rotary.
Put in a glass, push the button, Put in next glass , Push the button and so on.
Because it will save much time if I do not need a 360 degree engraving.
One thing not talked too much about this unit, is the open concept cover. The lack of an interlock closure system makes this classified as a Class 4 laser, which if you are in a business that OSHA is regulating, it is a real headache to use the machine "safely". Pretty much have to have it in a locked room with no windows operating by itself, blinking entry lights, a bit of stuff if you look it up. OSHA Technical Manual (OTM)
Section III: Chapter 6 lines a lot of it out.
You can set both the F1 and the ultra to shut off if you lift the cover. Not useful when using accessories though.
Not of it's a small business OSHA kick rocks 😂
My god, you have no life and no one thinks you're smart.
Narcing?
@@paulrivera5049 Are you trying to say tattletale? Isnt a Narc associated with drugs? Naw, I just work at a facility that has requirements and its something people outside of hobby lobby have to consider.
is there software, that can take a photo into a laser design?????
Can the F1 or F1 ultra engrave on gold plated stainless steel?
I'm looking to engrave photos, such as portraits of people, on gold plated necklace pendants.
Which would you recommend for this use case?
Thank you in advance!
Both will work honestly. F1 will be much cheaper for you and for what you want. F1 Ultra will do the same but much much faster and be a little more flexible.
I ❌ Aaaa... ✅
Ummm... Not the "First". The Sainsmart Z6, is.
That said, can it cut metal? I would LOVE a laser that can cut 1/16" brass/copper/stainless (any of those)
Have you tried engraving anything like silicone wristbands with the stool ultra? I get a lot of requests for that.
Way to expensive for what it does. After owning 60w fibers and C02 galvo lasers I can say that thing is way to slow. As far as making money the market is to saturated now and that laser is to slow and not cable of the money jobs. Its a toy for at home at best.
Martin Steven Johnson Elizabeth Thomas Christopher
Would you be willing to share a link for the ridge style wallets?
Robinson Ruth Young Mark Clark Michael
Allen Nancy Wilson Elizabeth Lopez Linda
Jackson Angela Martin George Williams Mark
Need to add air assist
I'm have the D1 pro and looking to get this for my shows to be able to do things on the spot at shows and to also be able to do batch items with the Conveyor. Great video can't wait to save up and get one
You will absolutely love it man. I have been using mine since I got it!!! I think it’s a well rounded investment and tool for people who are going to put it to use.
Can you add a link to the adapter that you used for the minimalist metal wallet?
If you have that laser? It would be very easy to make one.
Hello, can you please share some of your suppliers for like the wood keychains and bulk or cutting boards… honestly everything… lol? Thank you.
Great video thanks. Have you managed to get a black mark on steel where it’s does not actually engrave? I believe it’s called xmarking and also can it white engrave on steel?
Where do you get your blank products like the wallet and etc? Thanks!
Hye... Will you able to show... Make craft on Leaf 🌿.. ?? With the F1 ultra???
How would you compare this with the ComMarker B4???
Another question… Do you have to hook up your PC constantly to the F1 ultra or can you go Bluetooth or over some cloud server?
very kool, can you do 4.5" x 4.5" white tile engravings?
4000+ euro, thats even way too much for just a side hustle. Wish you would do more woodcarving videos, those laser machines are not affortable for beginners 😀 thumbs up for the old woodcarving videos 👍
where can you get the embossing stamp blanks?
where do you purchase the wood key chains?
I’ve already ordered mine to go with the F1 I already own
Can you cut acrylic and if so, how thick?
Great. Where get I project Nr 13?
14:27 you said infrared. Did you mean fiber? I have an F1, thinking about getting the Ultra
I meant Fiber lol. It still runs on the IR Wavelength. But it is Fiber :)
I’m wondering about using the conveyor to cut and engrave longer objects.
You won’t be able to cut on the conveyor, but it will most definitely engrave!
Haven't purchased ANY laser yet. Complete noob. Looking to use for a side hustle.
Lasers are becoming crazy popular. Many people have quit their jobs because of starting “side hustles” with lasers 🤯
Ordered the F1 Ultra today from your link. Thanks for the extra savings. Love your channel. This will be a great addition to my F1 and We Creat Vision Lasers. Can’t wait for delivery!
Hey Steven! Glad to hear you got you one! It is my new favorite! You will absolutely love it!
Did you tested it with silver too?
i see you have few comments on the rfid wallets. i see your settings at the bottom, but what was the set material you used?
I didn't use a set material at the time of doing these. 100% Power, 1000% Speed, 300 LPC
Would love to test one of these out
Kinda expensive...
I just want to say that xtool creative space has the settings that you did
So for part of this video I was using an older beta software. Since then, they have updated to support with one click settings 😁
3:35 😯
Great video my friend. Appreciate the insights. You work hard 🙌
I appreciate that! Thank you for your friendship and support my dude!
@@CorneliusCreations always!!
Where do you get the coaster at 11:10?
I got these from a local craft store called hobby lobby for $5
Thank you for such a fluid and concise video!
Also! I like to use a heavy bodied black tempera on the metals to engrave, it makes it black and more visible, can use higher speed, and the resource is cheap and accessible. Clean up is quick too!
Thank you for the kind words!
Great tip!
The best F1 Ultra Video on TH-cam thanks for this. Can't get my ultra fast enough the wait is driving me crazy lol.....
Thank you for the kind words my friend! Trust me, you will LOVE IT!
How long did the tumbler take to engrave?
I think around 4 minutes. I could have definitely improved the look by playing around with the settings.
What about the laserpecker lp5? Its cheaper and almost exactly the same stats