What's needed to LT swap your 88-98 OBS

New Lowered Genetics merch is available now, go check out my instagram to see whats new and message me with any questions or to acquire merch.
My Instagram - / clay_hatle
Motor mount - www.ictbillet.com/sbc-to-2014...
Power steering bracket - www.ictbillet.com/gen-v-lt-al...
E fans - www.speedwaymotors.com/Speedw...
Fan harness - www.psiconversion.com/product...
Coolant tank - www.rockauto.com/en/moreinfo....
Lower rad hose - www.rockauto.com/en/moreinfo....
Upper rad hose - www.rockauto.com/en/moreinfo....
Long tube headers - speed-engineering.com/product...
Throttle pedal - www.rockauto.com/en/moreinfo....
Fuel pump - www.snakeeaterperformance.com...
Fuel pressure regulator - www.summitracing.com/parts/ae...
AN line adapter plate - protouringstore.com/products/...

[@olp852]

Thanks for making a simple easy to understand video.

[@rangel.90]

Do you remember the ID size to upper and lower coolant tank hoses?

[@JimJones-pl5sr]

What holes on ict billet plate did you mount the motor mounts,

[@dariannimeck2178]

awesome video! very helpful, Im trying to get info for swapping my L86 6.2 into my 1998 chevy c1500 2wd but cant seem to find much for forums on the situation, any differences for the l86 to fit a 1998 2wd?

[@claytonhatle.1988]

Not that I know of, wiring will be a little different from 88-94 and 95+ but mostly everything else should be same but if you run into any issues message me on instagram and I can try my best to help

[@masterslsobs]

Darian, I have a 88-00 obs connector pinout file that helps alot with ls lt obs swaps.

[@dariannimeck2178]

@@masterslsobs sweet man! Would I be able to get that file?

[@OscarCovarrubias-ts9lb]

@@claytonhatle.1988dude I need help on mine? I have a 1994 with the 6.2 10 speed mounted just don’t have it wired idk if I need a computer or what

[@claytonhatle.1988]

@@OscarCovarrubias-ts9lb send me a message on insta or Facebook I’ll see if I can help you

[@enriquesanchez7747]

Would it hook up to my 91 Cheyenne 5 speed?

[@MegaGsizzle]

Good stuff. What do you think you’re in it for price. Including your labor

[@claytonhatle.1988]

Thank you and not 100% sure yet but I will be making a video on it soon once I tally it all up

[@twitchClipUploads]

Hey man great video , question the video says LT would this be different I have a 1995 sierra that I want to put my 2012 Denali 6.2 into. Think it’s technically an LS not LT any major differences between your list you can think of?

[@claytonhatle.1988]

There’s going to be quite a few differences. Motor mounts are different but ICT Billet still makes some for the ls. Want need the power steering stuff I do because ls already have it. Different fuel system, and few more things

[@twitchClipUploads]

@@claytonhatle.1988 cool thanks for the response I appreciate it!

[@rtrottier14]

Are you running a cruise control on it? does the air conn have to link into the harness at all or is it an independant system?

[@claytonhatle.1988]

@@rtrottier14 haven’t done cruise or ac yet, although for the ac I’ll run a factory l84 compressor and it will work that way and the harness is a psi harness you have to spec it out for anything you do or don’t want.

[@normanfab4178]

Any fitment issues with those headers? I've got a lt swapped k1500 and I thought about using those

[@claytonhatle.1988]

The passenger side sits the frame rail a little so you have to dent up the header a little or grind down the frame

[@MiguelMadrigal-nj7vq]

Do you move the water pump ?

[@coolkid6751]

Noob question but how’d you get around the afm dod? Considering doing a gen 3 swap over the gen 5 because of it.

[@claytonhatle.1988]

Easy cheap way is you can just disable it with hp tuners (which I did that for the first 2k miles of the swap then I did a cam and did the better way which is cam, dod plugs, and new non dod liftersz

[@fernandobenavides9124]

By any chance do you know how long the serpentine belt was or where did you get it ?

[@claytonhatle.1988]

I got it off Amazon. It’s a gates belt part number is - K06100HD

[@fernandobenavides9124]

Thanks .

[@marksayler623]

What did you do for power steering lines?

[@claytonhatle.1988]

I used a c6 vette pump and my buddy made me a reservoir. Using all -6an lines

[@AbstractDreamz]

How much was the Unlock for HP tuners?

[@claytonhatle.1988]

If I remember right it was $200. It took 4 credits but it all depends on the year I think the 2014-2016 lt are just 2 credits like the ls are

[@jesusamaya1285]

Did you use the stock battery or upgrade

[@claytonhatle.1988]

Just the factory battery

[@judondatruth106]

Did you leave the dod and afm or did it get deleted

[@claytonhatle.1988]

I disabled it in the tune for now but I did just order a cam and dod afm delete kit.

[@judondatruth106]

Are you on Facebook

[@claytonhatle.1988]

@@judondatruth106 yes @ Clayton hatle

[@victorgrimaldo2983]

Do you have any problem with alternator not charging battery. Cus I get 11.9v at most and can’t seem to find the issue. Thanks!

[@claytonhatle.1988]

@@victorgrimaldo2983 most the time it charges at 13.4 it will randomly drop to 11.7 but I turn off the car wait to minutes turn it back on it’s back up it’s weird

[@jared_dsg7857]

Did you delete the oil cooler lines to the engine to radiator ?

[@claytonhatle.1988]

Yes I did

[@jared_dsg7857]

@@claytonhatle.1988as well as transmission lines?

[@claytonhatle.1988]

@@jared_dsg7857 no the tranny cooler lines still go to the radiator

[@ponchoissean]

Anything crazy need to be done with the computer?

[@claytonhatle.1988]

Vats deleted and couple other things turned off and on

[@eliwetch2944]

Headers?

[@claytonhatle.1988]

Speed engineering long tube headers for lt c10 swap

[@masterslsobs]

Sent you a message on your Facebook.

[@MiguelMadrigal-nj7vq]

Do you move the water pump ?

[@claytonhatle.1988]

I did not move the water pump

[@MiguelMadrigal-nj7vq]

Do you move the water pump ?

[@claytonhatle.1988]

No it’s stock location