That’s a great system from the looks of it , I’m working on the same thing getting off grid I’m done with 4 and $500 electric bills that’s unreliable I’m running 4 Tesla batteries right now and I don’t feel it’s safe enough hopefully upgrading by summer
Joe, after all the battery and inverter reviews, what do you prefer? I'm grid-tied w/net billing. I have 12.3Kwh solar, true 9.75Kwh ac coupled system. Looking for hybrid 12k inverter and battery or an all in one system. I would like to keep my initial invest cost as low as possible without shutting myself in the foot. I'm having paralysis from over analysis.
That’s a pretty sweet setup! Lux looks like a great inverter. Would be a fun system to test out! Having everything inside the wiring area (behind latches and not tiny screws) just looks like a very nice clean way to run all your cabling. It really simplifies installation as well. I mean just look at everything you had on your wall before, and now you have 2 things on your wall… I hadn’t heard of the Ethos system before though. Kinda interesting that they run connections from the combiner all the way down to the bottom battery as well. Must be some way to equalize current draw across all the batteries. You mentioned that their IP 65 rated. Do they have internal heaters as well? Just wondering how they would do outside in the MI winters… Looking forward to the next videos to see how it all performs. Thanks!
It is a pretty sweet setup and super easy to install! lol yeah all the stuff I had before. Some of it was for future expansion but yes, this simplifies it quite a bit! Yeah the cables from lower battery to controller would be similar to how we connect our diy batteries to keep an even load across them. Yep IP65, dont think they have heaters or I dont remember seeing anything. Could be in the future tho? Yeah we get COLD AF here to so I wouldnt install them outside. Maybe in my garage but not outside.
Never connect panel ground close to the inverter or in your case inside the inverter unless there are compliance requirements. One small lightening strike and your inverter, BMS are gone. Run the panel earth to a seperate ground rod or if you have an ground rod in your house, connect to it at the earth level.
So I should run a ground wire from the frame of the panels straight to the ground rod. Wouldnt it be the "same" since all grounds go to that rod. Also that ground bar is there for the solar ground. Either way I know you want all metal grounded to a single point.
@@AveRage_Joe Yes ground wire from frame straight to the ground rod at earth level. And no its not the same because as we know lightening follows the path of least resistance to ground so if you run an wire to the rod, it wont likely travel back to the inverter. Trust me I had to replace my inverter because of a lightening strike before I knew this
@average_joe my diy power wall with recycled laptop 18650 that I copied your design to make is starting to fail after 6 years. I had to take 2 out of the series. What prebuilt LiFe do you think provides the best value with around 9-10kwh storage?
Looks like you are going to be changing things often. Do yourself a favour and put up some unistrut lagged to the wall and then some more that is moveable on the lagged strut. Saves drilling so many holes in the wall. Great stuff as always.
Hi, Very grateful for you. Is this a Chineese or American company? I'm only concerned about the cheap Chinese batteries that could burd the entire house down! Thank you
Great video as always and I'm looking forward to the next one. I would like to see the tear down of the battery, battery controller and also the inverter. Are the battery settings locked or the user can change them? Is there active balancing in the batteries or just passive? Will there be a video of the inverter settings as well?
Oof 13hrs one way is a bit much. Id hate to try and pack it up since it weighs so much. I dont post very well if Im gonna be honest😆 I would help load in a truck tho lol
Nice and tidy for sure! I have most of the 2nd video done powering stuff but havent done a capacity test yet. I could probly do a capacity test on the 3rd battery I have set aside🤔
It is working out really good and is working a lot better then my growatt so far. Solar intake is a HUGE improvement as well! No quirks as of yet. A cool thing about this inverter since I already have a sub panel. This will backfeed my main panel to power the stove, AC amd dryer which I couldnt really do before. Thats another plus. I will say tho if your not doing anything grid tie and maybe you dont have sub panels like I do. Getting the 6kw is cheaper for 2. I am extreamly happy with it so far.
It gets easier and easier. Mine required a lot of engineering 😂😂😂 It’s been working for 2 years without any issues. Can’t remember what all I actually did since I haven’t had a problem 😂
You are 100% correct its getting easier and easier. My Diy system was starting to take place....then the Ethos lol. Ill restart on that here soon. Good to hear your system is working great! Also nice to hear that you forgot cause it works so good lol
In one of your previous videos titled "Low VS High-Frequency 48V Inverter" you demonstrated how a high frequency inverter that uses the same high frequency, output transformerless inverter tech like this one, couldn't even start your log splitter. So with all due respect, why are you now promoting this relatively poor 200% surge capacity, high frequency inverter?
Awesome video Joe as always. A mate phoned me yesterday he's getting a 10kw battery added to his 6.6kw solar au$11k Australia (usd=$7.160) is that a good price or is one of us being ripped off. Cheers Joe look forward to next video.
Thanks Man! So he paid $11k (aud) or $7k (usd) for a 10kwh battery? Yeah that is VERY steep in my opinion. You can get other batteries down there for cheaper like the orient power batteries. Those are great and come with certifications.
Have you added everything up tho from each site? I just did a quick search on each site for a 10kWh battery system with similar specs and all the things needed if starting from scratch not including shipping or tax as some states have different tax and some products offer free shipping. Then added the 18kPv as a kit. You would be surprised Signature Solar 10kWh (Pre-Assembled) EG4 Enclosed Battery Rack $549 EG4 LL-S Lithium Battery | 48V 100AH | Server Rack Battery - UL1973, UL9540A $1500 X2 $2990 72in 2/0 AWG Battery to Inverter Cables $86.08 X2 $172.16 $3,711.16 With Battery to inverter Battery Cables $3,539 Without Battery to Inverter Battery Cables ------------------------------------------------------------------------------ BigBattery 10kWh 48V ETHOS 10.2KWH - UL9540, UL9540a, UL1973, & UN38.3 $4,050 Without Discount (need to verify if comes with battery to inverter battery cables) $3,645 With 10% Discount (need to verify if comes with battery to inverter battery cables) ----------------------------------------------------------------------------------------------------------------------------------------- Signature Solar with 18kPv "10kWh kit" 18kPv $5,199.00 (Pre-Assembled) EG4 Enclosed Battery Rack $549 EG4 LL-S Lithium Battery | 48V 100AH | Server Rack Battery - UL1973, UL9540A $1500 X2 $2990 72in 2/0 AWG Battery to Inverter Cables $86.08 X2 $172.16 $8,910.16 With Battery to Inverter Cables $8,738 Without Battery to Inverter Cables ------------------------------------------------------------------------------ BigBattery 10kWh Ethos with 18kPv kit - UL9540, UL9540a, UL1973, & UN38.3 2/0 Battery to Inverter Cables X2 Included $9,249 Without Discount $8,324.10 with 10% Discount
Great video as always! Interested to learn more about the time of use function. Our use case is that we have a solar system setup as net zero export. Downside is it throws away excess solar when the homes loads are lower than what the solar is capable of at that time as the system throttles the solar output to match the load. Time of use would allow charging the batteries during the day and discharging them at night. Time of use Questions are 1) can you set the time of day the batteries would charge? 2) can you set the charge power to never draw from the grid to do this charging (monitored via the ct main feed data) 3) can you set discharge time and power? 4) can you set discharge power to never send power to the grid (monitored via the ct feed data)? We would be using this in ac coupled charging (no connection of this inverter to dc panels, this is handled by our existing setup). Thanks for consideration to answering these questions
@@AveRage_Joe The standard flickering lights and mine makes a "rattle" noise when in grid mode. The rattle also induces noise in one of my home theater amplifiers even though it's not even running off the inverter. It's pretty annoying, you'll be sitting listening to a quiet scene in a movie and all you hear is "tick tick, click tick tick tick" through the speakers.
I am using 6awg on both sides since that is what I had allready there from the previous system. It actually works out great since the output is only 12kw. The output feeds my sub panel which shouldnt go near 12kw. The backfeed wires/input wires are on the main panel which power the stove, AC and Dryer. Later on down the road I may install bigger wire for the input/backfeed side but well see.
Checked out 6k invertor earlier and it was $1299 and then I tried with your affiliate link and the price didn't change in the cart. Am I doing something wrong? I clicked the 6K link that you pinned. Has the 10% discount ended already?
It’s nowhere near that (yet)it’s a summer cottage . Was hoping to use my Honda 2000 just to keep the fridge and a couple lights on until the problem is solved not to charge batter.
Please test the grid tie zero export capabilities. Using CTs on the homes mains.. most people rarely have power outages.. most are simply concerned with lowering the electric bill.. so most of the time offgrid features should not be used until needed.. this inverter can power the homes main panel. No need for a critical load panel. When the grid isn’t available (which rarely ever happens) the inverters AC grid input breaker would be turned off. Also shut off grid supply to the main panel and then run the main panel from the inverters AC output…
I have been running it with the Zero Export enabled and it works great. Since I had a system before and already had it connected to a sub panel thats how I wired this system but you are correct, no need for a sub panel with this inverter.
I hope BigBattery supplies you with a full stack of batteries, I'd like to see a real outage test - like a few days as well as sustainable off-grid usage.
Can I say plug and play? Electric in a box 📦 😂 I can see people in high cost 💲 places being charged $ $ in the day charging at night when the electricity is cheap thence using batteries during peak hours!
From AU it would be a Beatch for sure! You can get Orient Power down there and they are good cheap batteries! Im pretty sure I have discount codes for them as well😉
Hey brother, can you explain what gauge wire you used from your inverter to your load panel? I am planning on using only 120v and run it to my load panel(all of this is off grid). What gauge do I need? Or how would you explain it for a better understanding?
I used stranded 6awg THHN to and from. I could possibly go down to 4awg since the panel is kinda far but I allready had it from my 12kw growatt that I took down. I havent had any issues running anything. Why not run 240v to your panel?
@@AveRage_Joe Thank you. I am far from average so I am keeping it simple for now. I just need to run some small appliances on my property. Lights, tv, wifi, fridge, cameras... etc.
Yep, thats the main issue at the moment. I have moar panels on the back patio waiting to be used. Would be easy to throw on the roof but DAMN.... the snow in winter lol. The roof is the best option at the moment🙄😄
About time you got the best inverter/charger. You need more battery. This inverter is recommended to use 28 kilowatts. I have 28 kilowatts and it is very happy. We are completely off-grid with ours. I am using 32 EVE LF280K cells and two JK-BMS with 2 amp active balancing. the LuxPower has two separate battery inputs. you can connect your DIY batteries to one of the inputs.
Chinese made, high frequency inverters use the cheapest inverter tech on the market. Why do you think no American inverter manufacturer on the market use this inferior inveter tech? American made inverter chargers are all low frequency, transformer based designs.
Interesting, this high freq inverter can surge up to 14,000 watts for 10 minutes with 8,000 watts over 6,000 watts of imbalance on one leg. And the self consumption is only 70 watts. Low freq are generally high self consumption. And LuxPower is not a recent start-up but a proven platform used all over the world for years. You really need to do some research before you make a comment. I am not a Chinese fan boy but when a company makes a good product you just respect it. Sol-Ark is Chinese also.
YesSirr we finally upgraded the inverter! This inverter is BadAss! I like that it can backfeed the main panel and stop at the CT clamps! You bet Ill be adding moar batteries PLUS the diy setup!😁🤘
And so what? It's hard to comprehend comments like this on youtube videos. You get videos for free here. How do you think these youtubers get little money from their videos? There's no harm in showing things like this advertisement or not. Not everyone is out for a Lifepo4 cell build, with balancing and BMS struggles. Some people want plug and play, and that's okay. People like you have a.d bl.oc.kers turned on and expect youtubers to teach you everything for free while making nothing out of it. Do better!
Affiliate Links to the BigBattery!⤵
🔗10kWh Ethos Battery Only - bigbattery.com/products/ethos-10-2kwh-2-module/?ref=53&campaign=Ethos
Kits⤵
🔗10kWh Ethos and 6KW Inverter Kit - bigbattery.com/products/6kw-10-2kwh-ethos-off-grid-power-system/?ref=53&campaign=Ethos
🔗10kWh Ethos and 12KW Inverter Kit - bigbattery.com/products/12kw-10-2kwh-ethos-energy-storage-system-ess/?ref=53&campaign=Ethos
🔗15kWh Ethos and 6KW Inverter Kit - bigbattery.com/products/6kw-15-3kwh-ethos-off-grid-power-system/?ref=53&campaign=Ethos
🔗15kWh Ethos and 12KW Inverter Kit - bigbattery.com/products/12kw-15-3kwh-ethos-energy-storage-system-ess/?ref=53&campaign=Ethos
Inverters⤵
🔗6KW Inverter - bigbattery.com/products/luxpower-6kw-split-phase-inverter/?ref=53&campaign=Ethos
🔗12KW Inverter - bigbattery.com/products/luxpower-12kw-18kpv-hybrid-inverter/?ref=53&campaign=Ethos
That’s a great system from the looks of it , I’m working on the same thing getting off grid I’m done with 4 and $500 electric bills that’s unreliable I’m running 4 Tesla batteries right now and I don’t feel it’s safe enough hopefully upgrading by summer
I have been watching your channel for a long time now. I just wanted to say thank you. I think you're doing a great job.
I want to thank you for saying that and I 100% Appreciate it!💥💥🤘
Joe, after all the battery and inverter reviews, what do you prefer? I'm grid-tied w/net billing. I have 12.3Kwh solar, true 9.75Kwh ac coupled system. Looking for hybrid 12k inverter and battery or an all in one system. I would like to keep my initial invest cost as low as possible without shutting myself in the foot. I'm having paralysis from over analysis.
Great video as always.
Thank You!💥🤘
What a time to be in Solar!! Products just get better and better.
100% Agree!!!😎🔋
That’s a pretty sweet setup! Lux looks like a great inverter. Would be a fun system to test out! Having everything inside the wiring area (behind latches and not tiny screws) just looks like a very nice clean way to run all your cabling. It really simplifies installation as well. I mean just look at everything you had on your wall before, and now you have 2 things on your wall…
I hadn’t heard of the Ethos system before though. Kinda interesting that they run connections from the combiner all the way down to the bottom battery as well. Must be some way to equalize current draw across all the batteries. You mentioned that their IP 65 rated. Do they have internal heaters as well? Just wondering how they would do outside in the MI winters…
Looking forward to the next videos to see how it all performs. Thanks!
It is a pretty sweet setup and super easy to install! lol yeah all the stuff I had before. Some of it was for future expansion but yes, this simplifies it quite a bit!
Yeah the cables from lower battery to controller would be similar to how we connect our diy batteries to keep an even load across them. Yep IP65, dont think they have heaters or I dont remember seeing anything. Could be in the future tho? Yeah we get COLD AF here to so I wouldnt install them outside. Maybe in my garage but not outside.
Wow, that's the system I've been looking at and drooling over. In California
Your in LUCK. BigBattery is in Cali AND....This can be legally connected, permitted if thats the route you want to go!!
Never connect panel ground close to the inverter or in your case inside the inverter unless there are compliance requirements. One small lightening strike and your inverter, BMS are gone.
Run the panel earth to a seperate ground rod or if you have an ground rod in your house, connect to it at the earth level.
So I should run a ground wire from the frame of the panels straight to the ground rod. Wouldnt it be the "same" since all grounds go to that rod. Also that ground bar is there for the solar ground. Either way I know you want all metal grounded to a single point.
Lightning suppression gear is a good idea too.
@@AveRage_Joe Yes ground wire from frame straight to the ground rod at earth level. And no its not the same because as we know lightening follows the path of least resistance to ground so if you run an wire to the rod, it wont likely travel back to the inverter. Trust me I had to replace my inverter because of a lightening strike before I knew this
Freakin awesome!
And one more reason, if something goes wrong you won’t get denied from your homeowners insurance.
Yes thats another!🤘
Pack rat i was thinking squarll. Im always seeing them stuff junk in trees. Lol
😆Im a HOARDER! You saw my basement!!! Speaking of...did you ever build any battery packs? Cant remember if you said or not.
What kind of tramsfer switch is that? Is it less than 200 amps?
I got a 100a transfer switch which is plenty since the Inverter is 12kw. Got it from Amazon amzn.to/3vlRDHE
@average_joe my diy power wall with recycled laptop 18650 that I copied your design to make is starting to fail after 6 years. I had to take 2 out of the series. What prebuilt LiFe do you think provides the best value with around 9-10kwh storage?
Excellent DIY video, thanks for preparing
Thank You! Preps are never done😁
Great video, love your explanations and your showing step by step.
Thanks so much! Appreciate that!!
Looks like you are going to be changing things often. Do yourself a favour and put up some unistrut lagged to the wall and then some more that is moveable on the lagged strut. Saves drilling so many holes in the wall.
Great stuff as always.
That would be the ideal way to go lol. I used unistrut on the diy battery and should have continued🤦♂️
Hi,
Very grateful for you. Is this a Chineese or American company? I'm only concerned about the cheap Chinese batteries that could burd the entire house down!
Thank you
Great video as always and I'm looking forward to the next one.
I would like to see the tear down of the battery, battery controller and also the inverter.
Are the battery settings locked or the user can change them?
Is there active balancing in the batteries or just passive?
Will there be a video of the inverter settings as well?
Great video! Plans for the growatt 12K?
Willing to sell it?
Thanks! Not sure yet. Was thinking for a backup jic the shtf but may be willing to sell it. Are you near Omaha Nebraska?
@@AveRage_Joe Thanks for the reply! Didn't realize we were that far lol. I'm 13hrs 1 way.
I'm assuming not worth it to freight it?
Oof 13hrs one way is a bit much. Id hate to try and pack it up since it weighs so much. I dont post very well if Im gonna be honest😆 I would help load in a truck tho lol
So far looks like big battery the way to go that off grid 6kw system looks great
Yeah the 6kw inverters look like a great way to go if you dont need or want to backfeed the grid.
Enjoyed the video. Thanks for sharing
Thanks for Watching!
That FedEx Truck should have a Big Bow tied around it. Nice job. 👍
😆 That would be Hilarious and Awesome!
Nice kit, looks well made and very tidy internals. Look forward to seeing the additional battery and some capacity testing.
Nice and tidy for sure! I have most of the 2nd video done powering stuff but havent done a capacity test yet. I could probly do a capacity test on the 3rd battery I have set aside🤔
Great looking set up!!
Any idea if these are certified in ontario Canada? Im in search of batteries
GREAT PROJECT JOE!
HOW EFFICIENT IS THIS INVERTER IN COMPARISON TO YOUR OLD GROW WATT 12k?
Thanks! I think the idle on this beast is only around 70watts vs the Growatt at 155watts! The 12k Growatt is still a great inverter tho!!
Wasn’t the growatt a low frequency inverter and this one is a high frequency?
Yep, growatt is LF and Lux HF.
Great video as always. Where is that transfer switch from?
That's what she said! Classic😂
😆😆💥🤘
Do you really believe the Luxpower 12k is really worth over $5,000? Are you really happy with it?
It is working out really good and is working a lot better then my growatt so far. Solar intake is a HUGE improvement as well! No quirks as of yet. A cool thing about this inverter since I already have a sub panel. This will backfeed my main panel to power the stove, AC amd dryer which I couldnt really do before. Thats another plus. I will say tho if your not doing anything grid tie and maybe you dont have sub panels like I do. Getting the 6kw is cheaper for 2. I am extreamly happy with it so far.
does this system have an app that can track whats going on? like what the tesla powerwall has?
It gets easier and easier.
Mine required a lot of engineering 😂😂😂
It’s been working for 2 years without any issues.
Can’t remember what all I actually did since I haven’t had a problem 😂
You are 100% correct its getting easier and easier. My Diy system was starting to take place....then the Ethos lol. Ill restart on that here soon. Good to hear your system is working great! Also nice to hear that you forgot cause it works so good lol
Tough to get a straight answer from EG 4 as well.
Bit of choral Libera over 6 mins in! ❤😂
😎🤘
In one of your previous videos titled "Low VS High-Frequency 48V Inverter" you demonstrated how a high frequency inverter that uses the same high frequency, output transformerless inverter tech like this one, couldn't even start your log splitter. So with all due respect, why are you now promoting this relatively poor 200% surge capacity, high frequency inverter?
I dont have a video like that and dont have a log splitter. Think you have me mixed up with another.🤷♂️🤘
Awesome video Joe as always. A mate phoned me yesterday he's getting a 10kw battery added to his 6.6kw solar au$11k Australia (usd=$7.160) is that a good price or is one of us being ripped off.
Cheers Joe look forward to next video.
Thanks Man! So he paid $11k (aud) or $7k (usd) for a 10kwh battery? Yeah that is VERY steep in my opinion. You can get other batteries down there for cheaper like the orient power batteries. Those are great and come with certifications.
Remember when we tried to potty train the cat? Those "reducers" look like the contraption that goes on the toilet seat while potty training!!! LOL!!!
LOL OMG that was Hilaious. We had a few good tries at that. Those reducers DO look like them😆😆😆
Nice DEYE inverter.
Why is Big Battery sooo expensive. Looks like EG4 is way cheaper.
Have you added everything up tho from each site? I just did a quick search on each site for a 10kWh battery system with similar specs and all the things needed if starting from scratch not including shipping or tax as some states have different tax and some products offer free shipping. Then added the 18kPv as a kit. You would be surprised
Signature Solar 10kWh
(Pre-Assembled) EG4 Enclosed Battery Rack $549
EG4 LL-S Lithium Battery | 48V 100AH | Server Rack Battery - UL1973, UL9540A $1500 X2 $2990
72in 2/0 AWG Battery to Inverter Cables $86.08 X2 $172.16
$3,711.16 With Battery to inverter Battery Cables
$3,539 Without Battery to Inverter Battery Cables
------------------------------------------------------------------------------
BigBattery 10kWh
48V ETHOS 10.2KWH - UL9540, UL9540a, UL1973, & UN38.3
$4,050 Without Discount (need to verify if comes with battery to inverter battery cables)
$3,645 With 10% Discount (need to verify if comes with battery to inverter battery cables)
-----------------------------------------------------------------------------------------------------------------------------------------
Signature Solar with 18kPv "10kWh kit"
18kPv $5,199.00
(Pre-Assembled) EG4 Enclosed Battery Rack $549
EG4 LL-S Lithium Battery | 48V 100AH | Server Rack Battery - UL1973, UL9540A $1500 X2 $2990
72in 2/0 AWG Battery to Inverter Cables $86.08 X2 $172.16
$8,910.16 With Battery to Inverter Cables
$8,738 Without Battery to Inverter Cables
------------------------------------------------------------------------------
BigBattery 10kWh Ethos with 18kPv kit - UL9540, UL9540a, UL1973, & UN38.3
2/0 Battery to Inverter Cables X2 Included
$9,249 Without Discount
$8,324.10 with 10% Discount
Joe I can't find the smash button to like. Can you help? 🤣😂🙃
😜🔨👍🔨🔨🔨
I guess those second set of battery terminals are for video 3. Nice looking system
Those terminals will be for video 4😏😆🔧🔋🔋
Your awesome bud and as always great content
I appreciate that! Thanks for Watching!!💥🤘
Great video as always! Interested to learn more about the time of use function. Our use case is that we have a solar system setup as net zero export. Downside is it throws away excess solar when the homes loads are lower than what the solar is capable of at that time as the system throttles the solar output to match the load. Time of use would allow charging the batteries during the day and discharging them at night. Time of use Questions are 1) can you set the time of day the batteries would charge? 2) can you set the charge power to never draw from the grid to do this charging (monitored via the ct main feed data) 3) can you set discharge time and power? 4) can you set discharge power to never send power to the grid (monitored via the ct feed data)? We would be using this in ac coupled charging (no connection of this inverter to dc panels, this is handled by our existing setup). Thanks for consideration to answering these questions
Great video, thanks. what about programing it?
Thanks! Ill show all the settings I havr in the next video. Hope in a few days.
Every time I see a video on the Luxpower inverters I sincerely regret buying the 6500EX.
Well you cant shoot yourself in the foot everytime. The 6500ex was out before the lux. Are you havin issues with yours?
@@AveRage_Joe The standard flickering lights and mine makes a "rattle" noise when in grid mode. The rattle also induces noise in one of my home theater amplifiers even though it's not even running off the inverter. It's pretty annoying, you'll be sitting listening to a quiet scene in a movie and all you hear is "tick tick, click tick tick tick" through the speakers.
What size wire do you have on the AC side? I put and output? Thanks.
I am using 6awg on both sides since that is what I had allready there from the previous system. It actually works out great since the output is only 12kw. The output feeds my sub panel which shouldnt go near 12kw. The backfeed wires/input wires are on the main panel which power the stove, AC and Dryer. Later on down the road I may install bigger wire for the input/backfeed side but well see.
Is your Jotta transfer switch auto & UL listed?
Has Auto option and works. UL listed....probly not. It may have some certs but would need to look😁
Checked out 6k invertor earlier and it was $1299 and then I tried with your affiliate link and the price didn't change in the cart. Am I doing something wrong? I clicked the 6K link that you pinned. Has the 10% discount ended already?
I am told that the 10% discount is for BigBattery name brand items only so the Lux Inverters wont count🙄
@@AveRage_Joe okay thanks for the response.
FYI Manual shows that 2 positive and 2 negative from the battery controller to the inverter. I beleave this is due to the gauge of the wire size.
Always leave them wanting more….
😆😆🤘
Competition for EG4 I like it!
Isn't that just the EG4 18K, but rebranded? lol
Yep same inverter. Both companies partnered with LuxPower. Signature solar put EG4 on theres, BigBattery just left it how it is.
Helps cut down on the design cost.@@AveRage_Joe
blade cells ? ?
Curious if you ever got around to testing this system with a generator. I can’t believe I must use a minimum 6Kw.
I havent had the chance yet but really want to!
Do use 6kwh at night or is 6kw your load most of the time?
It’s nowhere near that (yet)it’s a summer cottage . Was hoping to use my Honda 2000 just to keep the fridge and a couple lights on until the problem is solved not to charge batter.
Please test the grid tie zero export capabilities. Using CTs on the homes mains.. most people rarely have power outages.. most are simply concerned with lowering the electric bill.. so most of the time offgrid features should not be used until needed.. this inverter can power the homes main panel. No need for a critical load panel. When the grid isn’t available (which rarely ever happens) the inverters AC grid input breaker would be turned off. Also shut off grid supply to the main panel and then run the main panel from the inverters AC output…
I have been running it with the Zero Export enabled and it works great. Since I had a system before and already had it connected to a sub panel thats how I wired this system but you are correct, no need for a sub panel with this inverter.
I hope BigBattery supplies you with a full stack of batteries, I'd like to see a real outage test - like a few days as well as sustainable off-grid usage.
I would LOVE THAT! Would also put that to a test run!💪
@@AveRage_Joe I need to get on their radar…
@@AveRage_Joe I need to get on their radar…
@@AveRage_Joe remind me of your installed solar in kWatts?
Thanks Joe
Thanks for watching man!🤘
Can I say plug and play? Electric in a box 📦 😂 I can see people in high cost 💲 places being charged $ $ in the day charging at night when the electricity is cheap thence using batteries during peak hours!
100% plug and play in a box!!! Yeah this system would work wonders in a situation like that!!!
that would be a b&#%@ to be sending back to them. if only home storage was cheap in australia.
From AU it would be a Beatch for sure! You can get Orient Power down there and they are good cheap batteries! Im pretty sure I have discount codes for them as well😉
What happened to the EP Cube system?
EP Cube is a Pain the A to install. Plus BigBattery is cheaper and a US company.
Still going strong. Ive been powering my house with it since installed and have been meaning to make the next video with it powering my house ect.
Hey brother, can you explain what gauge wire you used from your inverter to your load panel? I am planning on using only 120v and run it to my load panel(all of this is off grid). What gauge do I need? Or how would you explain it for a better understanding?
I used stranded 6awg THHN to and from. I could possibly go down to 4awg since the panel is kinda far but I allready had it from my 12kw growatt that I took down. I havent had any issues running anything. Why not run 240v to your panel?
@@AveRage_Joe Thank you. I am far from average so I am keeping it simple for now. I just need to run some small appliances on my property. Lights, tv, wifi, fridge, cameras... etc.
@@AveRage_JoeI will also be using your CODE. Thank you for all of your videos
@chojthoj08 It will run all of that NO Problem! That is roughly my standard or "idle" load to include the cameras😁
Thank You! I 100% Appreciate that!💥🤘
Thanks
COOP
...
I would have got the 48V RHINO 2 - LiFePO4 - 280Ah - 14.34kWh for $3,799 instead of the Ethos
Yeah the Rhino 2 would be a great option! Moar capacity and cheaper!
Is the Rhino 2 UL certified? That may be an issue for some people…
yes, 48V RHINO 2 14.3kWh LiFePO4 Battery - UL Certified
Yep, its UL Certified!🤘
Thanks
COOP
...
Like# 100 - fell asleep at the wheel
Squeeeeeeeeeeeeeeeeeeeeee - finally the Big Battery offering!
BOOOOOOOOOOMMMMMMMMMMMM
LOL Isnt that a song by Bloodhound Gang!!😆🤘
😆😆😎
💥💥💥💥💥
? Breaker rating
At the moment I am using 60a breakers!
@@AveRage_Joe I'm talking about breakers on the batteries. Looking on the data sheet of manufacturer. I don't believe they would be in spec.
that journey "off grid" needs a lot more solar panels not more inverters and batteries
😆 Currently trying to figure out a good place to put moar panels!😵💫
@@AveRage_Joe
good on you. yes it might be a bit difficult with all the trees around.
Yep, thats the main issue at the moment. I have moar panels on the back patio waiting to be used. Would be easy to throw on the roof but DAMN.... the snow in winter lol. The roof is the best option at the moment🙄😄
About time you got the best inverter/charger. You need more battery. This inverter is recommended to use 28 kilowatts. I have 28 kilowatts and it is very happy. We are completely off-grid with ours. I am using 32 EVE LF280K cells and two JK-BMS with 2 amp active balancing. the LuxPower has two separate battery inputs. you can connect your DIY batteries to one of the inputs.
Chinese made, high frequency inverters use the cheapest inverter tech on the market. Why do you think no American inverter manufacturer on the market use this inferior inveter tech?
American made inverter chargers are all low frequency, transformer based designs.
I’m totally off grid with 160kWh of LFP. I can easily use 30kWh overnight. I would need two of those hybrid inverters.
@@kickgas7171 Which inverters are US made ?
Interesting, this high freq inverter can surge up to 14,000 watts for 10 minutes with 8,000 watts over 6,000 watts of imbalance on one leg. And the self consumption is only 70 watts. Low freq are generally high self consumption. And LuxPower is not a recent start-up but a proven platform used all over the world for years. You really need to do some research before you make a comment. I am not a Chinese fan boy but when a company makes a good product you just respect it. Sol-Ark is Chinese also.
YesSirr we finally upgraded the inverter! This inverter is BadAss! I like that it can backfeed the main panel and stop at the CT clamps! You bet Ill be adding moar batteries PLUS the diy setup!😁🤘
Afternoon Joe. Next month I start my new setup. 😉
Mornin! New setup AYE??
@@AveRage_Joe Maybe asking for some help later about Large Growatt.
Let me know!🤘
@@AveRage_Joe Will do.
Hardly DIY. More of an advertisement.
I did everything myself other then building the battery and inverter🔋⚡
You’ve already built your batteries twice. I’ve never seen anyone build an inverter lol.
And so what? It's hard to comprehend comments like this on youtube videos. You get videos for free here. How do you think these youtubers get little money from their videos? There's no harm in showing things like this advertisement or not. Not everyone is out for a Lifepo4 cell build, with balancing and BMS struggles. Some people want plug and play, and that's okay. People like you have a.d bl.oc.kers turned on and expect youtubers to teach you everything for free while making nothing out of it. Do better!