If your using the Extec like I used we had to have steel pipe running around the top of the box with holes drilled every like 3 inches. We ran water up to it with a standard garden hose. It makes the tires shred way easier. And ours would need a new fuel filter like every week for what ever reason. So towards Thursday or Friday it would bog down real hard and reverse itself after hitting only like two tires.
AS THE INVENTOR OF SHEAR SHREDDERS MOST GROUPS DO NOT PUT THE RIGHT TORQUE TO THE APPLICATION AND THIS IS A GENERIC MAKE OF A SHEAR SHREDDER AND FOR SURE ITS NOT TORQUED DOWN TO JUST SHRED...SEE US AT SHREDPAX SHREDDERS OR EIDAL SHREDDERS INVENTORS SINCE 1966
hi just seen your video i use to work for extec and by watching this i see that the hyd pressure need to be adjusted if you need to know more get in touch.
I'll bet the owner found there was something wrong with this unit . These Extec shredders employ around 500hp and I'm seeing less that 140 effective power there.
THIS CAN BE PURCHASED FROM THE SHREDDERHOTLINE GROUP FOUND ON THE INTERNET AS INVENTORS OF THIS TYPE OF SHREDDER FOR SALES AND SERVICE OF EXTEC MACHINES CONTACT OUR GROUP WHEN THEY HAVE THIS DESIGN
THE CONCEPT IS GOOD BUT THEY ARE NOT SHEAR SHREDDER EXPERTS LIKE WE ARE AT SHREDDERHOTLINE AND EIDALKUBOTA SHREDDER GROUP AND THE INVENTOR OF THIS DESIGN IS STILL ALIVE - DAN BURDA WHO CAN BE FOUND IN THE INTERNET AS WELL AS HIS COMPANIES SHREDDERHOTLINE OF USA AND CANADA
Somebody paid a lot of money for something that was only good for bicycle tires. I can't believe it that they don't. He could put two or three tires on the size of that machine and all it would do is barely work. I think it was only good for bicycle tires. Somebody spent a lot of money for nothing I know this video was from 13 years ago but I hope they got something better than that
sure waste a lot of time and fuel with that dumb excavator. I would have the grinder way lower and then push the tires into the tub with a loader......and other ways too.
I've seen plenty of shredder videos, and there are lots of machines that shred tires easily. Good video. ♡ T.E.N.
If your using the Extec like I used we had to have steel pipe running around the top of the box with holes drilled every like 3 inches. We ran water up to it with a standard garden hose. It makes the tires shred way easier. And ours would need a new fuel filter like every week for what ever reason. So towards Thursday or Friday it would bog down real hard and reverse itself after hitting only like two tires.
AS THE INVENTOR OF SHEAR SHREDDERS MOST GROUPS DO NOT PUT THE RIGHT TORQUE TO THE APPLICATION AND THIS IS A GENERIC MAKE OF A SHEAR SHREDDER AND FOR SURE ITS NOT TORQUED DOWN TO JUST SHRED...SEE US AT SHREDPAX SHREDDERS OR EIDAL SHREDDERS INVENTORS SINCE 1966
a week later the tires are done! Yippie!
thanks for the video. I was #41 like.
hi just seen your video i use to work for extec and by watching this i see that the hyd pressure need to be adjusted if you need to know more get in touch.
It needs a cutter ever three shredders or so, in order to stop it from getting jammed .
Here the teleology of the rubber tyre is graphically demonstrated!
These shears are more suitable for engine blocks and hard metals than for tires
I'll bet the owner found there was something wrong with this unit . These Extec shredders employ around 500hp and I'm seeing less that 140 effective power there.
how the heck did I get here I looked up poppy flowers and got here?!?!?!?!
Why turn the excavator counter clockwise it was defiantly shorter to go clockwise
Tyres hav feelings...
It needs lubrication. You're supposed to toss in one Mexican a month to fix that.
I can't stop laughing about this comment haha very well said, made my day lol
the notches are to large. instead of them being huge like that, make them the size of SSI's shredders
THIS CAN BE PURCHASED FROM THE SHREDDERHOTLINE GROUP FOUND ON THE INTERNET AS INVENTORS OF THIS TYPE OF SHREDDER FOR SALES AND SERVICE OF EXTEC MACHINES CONTACT OUR GROUP WHEN THEY HAVE THIS DESIGN
If it needs a reverse gear, it's a weenie of a shredder.
THE CONCEPT IS GOOD BUT THEY ARE NOT SHEAR SHREDDER EXPERTS LIKE WE ARE AT SHREDDERHOTLINE AND EIDALKUBOTA SHREDDER GROUP AND THE INVENTOR OF THIS DESIGN IS STILL ALIVE - DAN BURDA WHO CAN BE FOUND IN THE INTERNET AS WELL AS HIS COMPANIES SHREDDERHOTLINE OF USA AND CANADA
VERY COOL!!! i wanna this monster on my baze in RUSSIA=)
Lubricant is missing here. Water could do the job.
Ддддддзддддддлдджджждддд
It seems to want more power
Powered by an engine from a Honda Civic.
surely there must be a more efficient way to shred tires than this...
I think at this Machine is something wrong, not really powerfull and way too slow.
But anyway, tires are a very Hard Meterial to crush.
You need SSI
your gonna burn you clutch pads out so fast having the engines stop and reverse so much. Get your blades resurfaced and your cut will be much better
that machine is slow and the loader way too big and expensive for that job.
Somebody paid a lot of money for something that was only good for bicycle tires. I can't believe it that they don't. He could put two or three tires on the size of that machine and all it would do is barely work. I think it was only good for bicycle tires. Somebody spent a lot of money for nothing I know this video was from 13 years ago but I hope they got something better than that
This machine is way too slow.
At the rate this machine shreds it will take 20 years to shred that pile of tires. Week week week Give It Up this machine suuuucks.
not enough power!
This video is painful to watch.
sure waste a lot of time and fuel with that dumb excavator. I would have the grinder way lower and then push the tires into the tub with a loader......and other ways too.
Great idea,but maybe if it was down lower it might be safety issue with OSHA
Sx
Booooo
This shredder is fucking weak!
Week
WEAK
WEAK!!!!
worthless!!!