How to Make a Digital Clock With Alarm | Real Time Clock With Alarm | Digital Clock

How to Make a Digital Clock With Alarm | Real Time Clock With Alarm | Digital Clock
In this video, you will learn how to make a digital clock with alarm at very low cost.
watch the full video to know more about it.
Anyone can make this project.
So Friend, how do you like this video? Be sure to let me know in the comments.
🔘Follow me on:-
👉Instagram :- / theelectronicsadda
👉Facebook :- / theelectronicsadda
Circuit Diagram :- drive.google.com/file/d/1TioY...
Code :- drive.google.com/drive/folder...
---------------------------------------------------------------------------------------------------------------
** Components List : Buy Link **
---------------------------------------------------------------------------------------------
1 * Arduino UNO : amzn.to/3E1nvj8
1 * 28 pin IC Base : amzn.to/3DYSvjZ
1 * 16mhz Crystal : amzn.to/3oVuWUK
1 * DS3231 RTC Module : amzn.to/3yrrkgk
1 * XL6009 Module : amzn.to/3dRkveD
1 * TP4056 Module : amzn.to/3oT7rf3
1 * 3.7V Lithium Battery : amzn.to/3dVVbEu
4 * Pushbutton Switch : amzn.to/3dVVqPU
1 * Female header pins : amzn.to/3EXEyE4
1 * Push Knob
1 * 10K Resistor
1 * 1.5K Ohm Resistor
1 * 1K Ohm Resistor
2 * 22pf
Dote Board
-------------------------------------------------------
More Updates: Please Subscribe Our TH-cam Channel click - Link:- / theelectronicsadda
Watch More Videos on My Channel - Link:- / theelectronicsadda
how to make digital clock
how to make digital clock with alarm
best digital clock
home made digital clock
real time clock with alarm using arduino
digital clock with rtc
digital clock kaise banaye
✴️-: Tools Kits & Components - Best Price :-✴️
👇👇👇👇👇👇👇👇👇👇👇👇👇
_________________________________________________
Soldering Iron 25 Watt - amzn.to/3iEfw2z
Digital Multimeter - amzn.to/3iEfw2z
9in1 Screwdriver Set - amzn.to/3pdfGQM
Bread Board - amzn.to/3p556vc
Dote Board - amzn.to/3iOabpD
Glue Gun with 5 Glue Sticks - amzn.to/3o6PLJq
Arduino UNO - amzn.to/2Y6cKK4
LED 3mm RED - amzn.to/2Y1GPuh
Micro USB Cable - amzn.to/2MjIM2E
-----------------------------------------------------
#digitalclock #alarmclock #rtcmodule #ds3231rtc #theelectronicsadda #realtime

[@diy_electronics]

Great project 💯

[@THEELECTRONICSADDA]

Thank you so much ☺️☺️❤️

[@ardaa2607]

the project is really great thank you very much

[@THEELECTRONICSADDA]

You are welcome

[@shilpadas4222]

Excellent vdo

[@THEELECTRONICSADDA]

Thank you so much 😊

[@creatives.s.3462]

Nice idea bro 👍🏻

[@THEELECTRONICSADDA]

Thanks bro..❤️☺️

[@trissmerigold7197]

i really like all of your projects. if you allow me to make a suggestion, in many projects where timing is not critical (for example this one as it uses an RTC module), you can use the internal RC oscillator of the ATmega chip, saving you a couple of components. It is easy to do, only need to burn a different bootloader(or to be more precise, different fuse bits settings), but this is all done when you "burn the bootloader" from the arduino IDE. There are tutorials on the internet too. Thank you for the inspiration and best of luck fot the channel. I hope it grows bigger.

[@mariushmedias]

In addition to this, the dc-dc converter is completely overkill for such project not to mention fairly inefficient - it's not designed to be operated at low currents like this project needs, a few mA at most if you don't turn on the LCD backlight. At 5-10mA, that dc-dc converter is probably 70-80% efficient.
It would probably make more sense to use 2 rechargeable AA or AAA batteries and use a voltage doubler chip like *7660 (ICL7660, TL7660, etc, generic chip made by lots of companies) or LM2766 or others and you'll get close to 97% efficiency. The circuit also doesn't need exact voltage, the microcontroller and the display can work with let's say 4.5v ...5.5v so doubling 2.4v...3v to around 4.5v...5v would be perfectly fine.
Hell, it could run straight from 3 non-rechargeable alkaline batteries for months, without a regulator, 3 batteries give you 4.5v and that's good enough.

[@MrHoabantrang]

Nice project, sir!

[@THEELECTRONICSADDA]

Thank you ❤️❤️

[@rimpadas938]

👍👍👍

[@THEELECTRONICSADDA]

Thank you so much 😊

[@AkbarAliTips]

Nice

[@THEELECTRONICSADDA]

Thank you so much my friend 😊

[@khawajaproduction55]

Hello brother Ye kon sa software hai jis me ap 3D Circuit design krty hain please?

[@jeevanp6311]

Can you show me how to soldier it in a video

[@omodeindemustopha9270]

Hi, thanks for sharing this with us. Please, can you help us to make a project?

[@arughana]

How much alaram can we set per day

[@LastGaming0]

kay arduion nano ka lsmd ic ka leya programming kare skado kay smd ic ma hour minte secada 01:59:59 aur dd mm yy 01/01/24 ( 7 led S M T W T F S ec tiyp ka hard programming kare

[@madanpandit4741]

Appna ya sari chij apko app bato Or location📍 bato please🙏🙏

[@amitkrishna1234]

How much price?

[@JameelAhmed-bw2dt]

The code you have given in description is not opening

[@martinabreu8372]

YOUR CODIGO IS NOT WORKING

[@jarednavarro4413]

Can someone tell me how to solder all the components together?? Is there something to connect it with?

[@itsarttimewithdaksh1508]

you have to use the soldering machine

[@RhifatSorkar]

How to alarm set 30 minutes
Please replay

[@RhifatSorkar]

Please

[@md.mursalin3714]

program to kaj kore na

[@amitshekharsinha4034]

your code is not working

[@Rachitkivines]

itna mehnat aur sirf 1.2k views😣 in near 2-months according to the upload date.

[@THEELECTRONICSADDA]

😭

[@amitshekharsinha4034]

exit status 1
no matching function for call to 'DS3231::DS3231(const uint8_t&, const uint8_t&)'

[@mariuspetcu7482]

Same to me mate ...(cry)

[@rajendrakumar-wb1pf]

Code up load nahi o Raha he bhyya ji rtc DS3231

[@tonyvarghese75]

Nice

[@THEELECTRONICSADDA]

Thank you ☺️

[@tonyvarghese75]

@@THEELECTRONICSADDA welcome