My neighbour just took down a tree so pulled out I got out the bowl saver this popped up just in time ,some great tips thanks Terry,the lathe looks great too. Cheers Philippe
I figured it out, it's the rps that's got dust on it. I called teknatool and the sent me a picture of the board I need to clean, but nothing tells me where it's at on the headstock.
There is a document on their website that provides the details of cleaning teknatool.freshdesk.com/support/solutions/articles/19000161964-faq-cleaning-the-rps-sensor-for-nova-neptune
I suggest you have a look in your manual as the error is likely to have a number associated with it that may be referenced in the documentation, which may provide a solution. Otherwise have a look at the Teknatool support documents on their website teknatool.freshdesk.com/support/home. Next step would be to contact Teknatool support, or there are a couple of facebook groups that are very knowledgeable and friendly.
A very used chuck from Terry’s workshop, not actually rust. Note he is also running an adapter as his chuck is M30 from his lathe and the Neptune has 1 1/4” 8 tpi in New Zealand configuration.
Great demonstration as usual thank you Terry
My neighbour just took down a tree so pulled out I got out the bowl saver this popped up just in time ,some great tips thanks Terry,the lathe looks great too. Cheers Philippe
Yes better to save than turn to waste
Great bowl saver tutorial. 👍
We are very lucky to have a number of skilled turners/teachers in our Guild
I figured it out, it's the rps that's got dust on it. I called teknatool and the sent me a picture of the board I need to clean, but nothing tells me where it's at on the headstock.
There is a document on their website that provides the details of cleaning teknatool.freshdesk.com/support/solutions/articles/19000161964-faq-cleaning-the-rps-sensor-for-nova-neptune
Hello, I have a nova neptune and am having an error pop up, is there a way to reset it? It's been working great but now it says error.
I suggest you have a look in your manual as the error is likely to have a number associated with it that may be referenced in the documentation, which may provide a solution. Otherwise have a look at the Teknatool support documents on their website teknatool.freshdesk.com/support/home. Next step would be to contact Teknatool support, or there are a couple of facebook groups that are very knowledgeable and friendly.
Thanku for ur geneoun presentation how can i get the machine to buy address
You can find the local dealer in your country on the teknatool site www.teknatool.com/find-a-dealer/
Is that chuck rusted?
A very used chuck from Terry’s workshop, not actually rust. Note he is also running an adapter as his chuck is M30 from his lathe and the Neptune has 1 1/4” 8 tpi in New Zealand configuration.
No but it has held hundreds of bowls bowl saving Ive had for 20 or more years anything from resin to glue on it