Mine is bubbling too much and I tried adjusting the water level to the skimmer. just working too good and it just overflows with bubbles. any recommendations?
T. Hunt the water level in that chamber stays the same. It changes in the middle section where the ATO float switch is. The pump is covered all the way. Usually noisier pump means the flow is restricted so you might have to move it in the + (plus) side a little more.
@@MorpheousLA I've got the same tank, and yeah, water level stays the same there. I was just wondering how far down you have the skimmer set, using the magnet or pump as a reference.
T. Hunt you can briefly see how far down the pump is at 0:34. I took out the skimmer for now due to lack of time to empty the collection cup on a regular basis. However, once it back on I’ll try to make a video showing where the pump is.
@@THunt-ss4hy It usually stays between 30%-45% on the slider. Anything above that makes it skim very wet. Is yours just loud or is it also skimming inconsistently?
Great video 👍 thanks for sharing!
I'm thinking of purchasing this for a 22 gallon long tank
Is it loud? I have a fishtank in my bedroom and am afraid it will be loud
They make a great little skimmer👍
I am not sure if I heard correctly but you turn in on intermittently on a weekly basis? Or do you constantly run it. thanks for the vid!
Skimmer’s always running.
Even with an ATO the waterlevel in my backchambers change a little (i think a 1/2" or something), is that a problem with this skimmer?
Mine is bubbling too much and I tried adjusting the water level to the skimmer. just working too good and it just overflows with bubbles. any recommendations?
If it’s new then best thing is to give it some time to break in
Yours is way quieter than when I used one. Could you do a video, or explain, where you put the water level? Like is the pump completely submerged?
T. Hunt the water level in that chamber stays the same. It changes in the middle section where the ATO float switch is. The pump is covered all the way. Usually noisier pump means the flow is restricted so you might have to move it in the + (plus) side a little more.
@@MorpheousLA I've got the same tank, and yeah, water level stays the same there. I was just wondering how far down you have the skimmer set, using the magnet or pump as a reference.
T. Hunt you can briefly see how far down the pump is at 0:34. I took out the skimmer for now due to lack of time to empty the collection cup on a regular basis. However, once it back on I’ll try to make a video showing where the pump is.
MorpheousLA Do you have the pump set to maximum + on the slider?
@@THunt-ss4hy It usually stays between 30%-45% on the slider. Anything above that makes it skim very wet. Is yours just loud or is it also skimming inconsistently?
How do I get rid of the micro bubbles coming out of the bottom? I have the same skimmer and tank.
Dann2013 do you use the black foam piece that came with the skimmer?
💜👍
I have the same skimmer it's very good 👍
does it also fit in the 2nd chamber on the 20g?