🔧iPhone 15 Pro Glass replacement - screen repair 4K video 📱😎
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
Tips:
temperature when removing the glass 90°C
isopropanol for cleaning the screen
wire thickness 0.006mm
lamination pressure 4bar
autoclave 50°C 20min 6bar
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜
I noticed alot of people damaged the digitizer because of miss the glass and taking part of the screen with it!….. anyway to show exactly how to use the metal floss and carefully removing the glass? Without damaging the digitizer? Tnx
Hi Jerry, really like your videos. What is the number one reason do you think for getting a few tiny bubbles right on the edge of the screen after de-bubbling? I've been refurbishing screens for a few months but I still get bubbles on the edge so then have start again. I know sometimes after removing the glass I see that the OLED is not perfectly flat and there can be a tiny 'dip' in the OLED as a result of impact at that point that caused the cracked glass. How do you ensure the OLED is perfectly flat before applying the glass? Thanks :)
If you leave the frame there are chances to have it making bubbles, hope it helps
Good job man 🫡
Hi Jerry,
We did our first 15 pro max screen last week and are experiencing glue deformation after a few days around the dynamic island area.
How do you prevent this?
Hi! Did You used UV after autoclave?
Elegancko! Ile stopni na podgrzewaczu?
90*C 😉
Excellent work, may God bless you always 👍
This is how screens should be replaced!!
If the OLED itself and touch aren't broken, then yes!
Not really, could have been done better and he even didnt replace the old adhessive
Great work! What temp do you use on the heat plate?
Thanks! 90 degrees of Celcius :)
@@JerryMobilePL Thank you! Is that the same for LCD’s? Say XR and 11
@@Coopzzz360yes, same temp.
Nie dajesz wklejki?
Hi Jerry, ive just started screen refurbishing. Everithing goes well, except the separation. The wire ripping constantly, any advice? Ive tried 0.03, 0.035, 0.04 wires.Thanks!
Wire ripping is normal but you have to keep it tight while working
Which liquid are you using?
If the polariser damages should we used Glass / OCA and poloraiser together part
Mam pytanko, jakiej nitki używasz?
Brawo Ty 👌
What tool is it you are using to remove the rest of the glue????😮
1) what glue did you use on the edges of the OLED before putting the glass on top?
2) Is it mandatory to replace OLED frame as well? I am getting mixed answers, need your opinion.
1 : T8000 clear glue.
2 : OLED frame replacement is mandatory only from iPhone X all the way to iPhone 11 pro Max.
I see many ways to replace the outer glass of the iPhone. Frankly, I am a professional in changing Android glass. Is there a risk in changing broken iPhone glass or do they all go through the same process?
Excellent job
How much you charge for that?
Could you explain how to separate the glass with a heat gun or hair dryer? It is for a home repair of an s21 ultra, how could I measure the temperature and insert the thread so as not to damage the display
Impossible without the machines used in the video
Hello, what is the name of the liquid you pour on the screen you use? What kind of liquid do you use?
Isopropyl alcohol 99%
hai jery..
how about problem green screen ?
Looks ok on first sight,but he didnt replace the old adhessive
mantap x bah...😊 ajarin dong
Myslisz serii ze uv cos daje? Bez hejtu po prostu pytanie.
Daje 😁
Nie zawsze szyby z oca są prawidłowo przechowywane (powinny być w chłodnym i ciemnym miejscu) a jeśli nie są to po kilku dniach wychodzą bąble. UV daje pewność że bąble nie powrócą 😊
@@JerryMobilePL ja tak szczerze nie zauwazylem zadnej roznicy. Jesli jest dobrze zalaminowane - dobrze spozycjonowane itp to nic nie wychodzi przynajmniej mi, czy uzywam uv czy nie. Na poczatku byla teoria ze uv niweluje fale, co tez jest kompletna bzdura, teraz dorabiaja teorie o niepowracajacych bąblach. Ja totalnie nie widze roznicy ale kazdy ma swoje doswiadczenia, szanuje.
i am fond of mobile repering if I want to learn how to work for iphone can you teach me how to work I am working already in pakistan am knowlge all android phones but not iphone.
how much does this service cost
@@ahmetyas3402 1100 PLN 😉
Didnt apply adhesive before attaching the screen to the phone 🤔
Using a metal tool for phone LCD is most risky , every repair expert would agree
What in the world is that adhesive remover 👀
А рамку кто приклеивать будет?
Never use that metal razor , i did it and the lcd gone because thta metal razor didnt move on glass 100% and half of thta metal cuted little of frame and after use cutter wire , the LCD to cutted with that wire and lcd gone😢😢
Just use cutter wire for do it with out ant metal razer as i did befor and that works okey
I just tried this video to find a new way but ...... lost that lcd
Szybko rozjebali 😂jaki stopień trudności 1-10?
Hmm.. 😄 nic nie jest trudne jeśli się to potrafi haha
Ten mocniej w ramie siedzi niż poprzednie modele, cały proces podobny
HOW THE FUCK DID HE JUST BREAK THAT PHONE, IT S BEEN ONLY 4 MONTHS SI CE IT WAS RELEASED
This is the life 😄😄
👍👍👍👍
U didn’t put the waterproof seal after taking it out now it will come back next as water damage
Water resistance is a myth. No manufacturer provides a warranty against water damage, and the tightness is max 1 year. It makes no difference whether he used a seal or not. When replacing the glass, it is not possible to seal it like the factory, because Apple does not sell glue between the glass and the frame, because officially the glass itself is not replaceable. Want tightness? Buy a 3x more expensive, factory glued to the glass and frame - OLED screen + seal and enjoy apparent waterproofness.
Newer iphones dont need it! It already has a thick rubber seal connected to the digitizer…. Before it was just aluminum… people added that extra water proof seal and the iphone stuck out the housing a bit….
@@lolek199316 Bullshit, the water resistance is not a myth, I use my phones underwater all the time since the 8 pro max, never had a problem using them in the pool for underwater filming,