Lithium Battery charging module modification, TP4056
ฝัง
- เผยแพร่เมื่อ 17 เม.ย. 2024
- Lithium Battery charging module modification, TP4056.
Please include a IRF9540 MOSFET. N-channel MOSFET such as IRFZ44 are not suitable. 5A to 10A can be obtained using IRF9540.
Components used in this project:-
1. TP4056 Lithium Battery charging module.
2. BC557 Transistor
3. IRF9540n P Cha-MOSFET
4. 1K Resistor
** Circuit Diagram 👉 drive.google.com/file/d/198vD...
#electronic #tp4056 #batterycharger #18650 #homemade101
12v battery charger : th-cam.com/video/SH95hUC7Pus/w-d-xo.htmlsi=13xquGBvCYZMNHV-
No hablo ingles pero es un exelente video ❤❤
thnak you
Thanks for your link for this scheme. Continuous your creative👍
thank you bro..
Why not with 5v 2amp charger adapter to give input for TP4056?
If you can use IRF9540 it is working. Plz use IRF9540.. I did use IRFz44n.
@@homemade_101 why not tes until 5A.??
@@alfatihid8901 I will test in next video
And remove the r3 resistor= 2.8amps
yes
Excellent one🔥
Thanks for listening
Cool, so this mod increases amps you can charge with and give you buzzer notifaction when done? Why wont it allow the original power source to charge?
yes you are corrects. If you can use IRF4056, you can do USB input.
@@homemade_101 ahh cool, very handy. Although that buzzer sound gives me a heartattack because it the same one when my inverter from solar is tripping without enough power. Everytime i hear that buzzer im conditioned to run to the inverter, its very distracting when youtuber use it. :)
@@mikejones-vd3fg thank you bro
😂😂
Bro i need a device which can control A and V ,like i need 0-3,4V and maximum A as posible ,for electrolysis
replace R3 resistor, 10K Preset
Bro can you make that circuit/device for me i will pay for it 🙏🏻
Bro from where did you buy this electronic parts?
alliexpress
Bro alliexpress is not available in India 😢
Just use how it was, for safety.
this is safety
Signal Booster Please!!??
Signal ??
This is absurd, not everyone has bench power supply to charge the battery with 5v 5amp input, you should make an alternate input power supply circuit for 5v 5amp for this charging module. Make a 5v 5amp charging circuit for TP4056.
THIS VIDEO IS NOT UPTODATE.
5V 5A : th-cam.com/video/-bJQ78JxXl8/w-d-xo.htmlsi=U0judjxO9o2UlSF3
@@homemade_101 my dear, again 8nthe input you are using bench power supply of 12v for an output 9f 5v5amp, make a circuit where the main supply is 220v AC transformer less power supply and out put in DC 5v 5amp .
On peut faire avec une quelconque plaquette nn
W🤔
you use z44 mosfet not a irf 9540
yes. plz.. You should use irf 9540