Many thanks for making this video. Your press build clearly demonstrates a high level of professional craftmanship. Something I've seen which might be a small improvement: To speed/ease foundation release from press, use low pressure compressed air and blow between wax and press. This will also facilitate using a minimal amount of wax per sheet, because a very thin sheet can be removed without tearing. Sincerely appreciate you posting this video.
What’s the best temperature for the wax? I have just been given a press and after having a go at making my own, I could see that the sheets were to thick as the wax was obviously to cool.
tomo bubalo Ik heb de vloeibare silicone door een geperforeerde plaat gegoten, en dan net zo ver dat het er door heen komt. Het is jammer dat ik geen foto's kan delen anders had ik jou een foto er bij gedaan.
Many thanks for making this video. Your press build clearly demonstrates a high level of professional craftmanship.
Something I've seen which might be a small improvement:
To speed/ease foundation release from press, use low pressure compressed air and blow between wax and press. This will also facilitate using a minimal amount of wax per sheet, because a very thin sheet can be removed without tearing.
Sincerely appreciate you posting this video.
Basher Ok thanks for the reactie
Tank jou
Een super pers
What’s the best temperature for the wax? I have just been given a press and after having a go at making my own, I could see that the sheets were to thick as the wax was obviously to cool.
85 decres
85 degres
And that how many sheets can you make out of a pound of wax
where i can buy this maschine?
How did you paint the paint mold for metal?
tomo bubalo dat is afwasmiddel.
I'm interested in how you silicon molded metal. which glue you used?
tomo bubalo Ik heb de vloeibare silicone door een geperforeerde plaat gegoten, en dan net zo ver dat het er door heen komt. Het is jammer dat ik geen foto's kan delen anders had ik jou een foto er bij gedaan.
Thanks
This is my email: tomo67.bubalo@gmail.com
thanks for picture
where i can buy this machine?
Ningks 0828 het is niet te koop, maar je moet het zelf maken net al ik.
heb je een tutorial hoe te maken als dat, stuur dan naar mijn e-mailadres oblatos0828@yahoo.com
where ca i buy one english pls
why post it if you don't share!?
Bee Hippie hallo deze pers is niet te koop maar is zelf gemaakt
looks like a wax hog...then its'prolly brittle cause you don't work harden it like a roller does which would increase the strength.
do you know of a good roller to buy? ive been researching and im not sure what to get
@@marmelukes bread dough rolling pin on a silicone mold,cheap easy ,not brittle