ฝัง
- เผยแพร่เมื่อ 9 พ.ย. 2017
- This tutorial describes how to remove the retractable dashboard cup holder unit from a 2013 Toyota Sienna. The 2013 Sienna is a 3rd-generation model which was introduced in 2011 and retains a similar dashboard layout until 2014, so this video may apply to other model years.
We hope this video helps you find those long lost treasures eaten by the cup holder. - ยานยนต์และพาหนะ
![THE TOYS x NONT TANONT - ดอกไม้ที่รอฝน (spring) [Official MV]](http://i.ytimg.com/vi/pPa1d5cC8M4/mqdefault.jpg)
I used to writes instruction manuals for wiring analog TVs, VCRs, and stereo equipment. After I wrote them I would ask a friend that was not technical at all and when they came up to a point that was unclear, I would take note and clarify my text. It appears you have done this many times as everything was crystal clear, in focus, and logically presented.
Your use of auxiliary lighting, camera/phone support with a fluid or fluid effect head, with a clear and precise voiceover was fully appreciated by this viewer!
Kudos for a phenomenal video.
I was able to avoid the masking tape altogether. Just pull the coiled spring out of the roll, insert it into the cavity, with enough length, it will not spring back. Slide the cupholder in, and boom! You are done!
This happened to me but with a 100 dollar bill! Thank you!
I'm not sure what got stuck to make my cupholder not open, but after force prying it, there was a strong magnet phone holder in the driver's side cup which would have been directly on top of the metal retractor, probably making the tray unable to slide. I also removed the air controll module and side seat heater/charger port for more visibility. Thank you for taking the time to post this! The card idea to slide out the tray was genious.
Awesome video, very helpful. Just bought thisvan with a broken cupholder and was able to fix in less than 10 minutes!!
This tutorial helped me unclog my cupholder that was stuck with a phone charger cord. Great tutorial! Thank you!
My cup holder would not close because a plastic clip fell into the slot, so it could not reach the latch. Thanks to the video, i was able to retrieve my clip. And close the cupholder. But then it got stuck, so i used a pry tool to pull it out again.
This was so helpful and then instructions patient and clear!
Right to the point, detailed but not any extra fluff, thanks
Beautifully done - extremely helpful - thanks!!
Thanks a Ton, could have not done it without your sharing
What a great video! Just what I needed. Thanks so much!
Thank you for this informative video. You saved my life right now!!
I like the vedio and it it really helpfull you have explain us very easy
How to open a cupholder that wouldn't open, pop out at all? In this video the cupholder still opens and did a full removal. Mine is stuck closed.
Mine is stuck. Won't come out at all. Did you get yours fixed?
@@zacbell5190 Nope. I kinda forgot i have that cupholders.
@@imlivelaffluvvson were you able to figure out how to get the cupholder to slide open? same problem here and can't get it to open up at all. thanks for any feedback, dealer quote is $800
Mine was stuck too, but used a pry tool to pull it out.
Exactly what I was looking for and we’ll made instructions, thank you!
Thanks for the tutorial. You saved my day!
Thanks for this tutorial, I have this same issue on my Sienna , I'll try.
Great instructional video...thanks!
THANK YOU SO MUCH! MY CUPHOLDER BROKE AND THE PEOPLE WHO FIX IT CHARGES 500$!
THANK YOU FOR THE INFO THAT'S the PLAN FOR TOMORROW CROSS MY FINGERS.. 😁😁😁
Life saver video thanks dude
Amazing video!! Thanks!!
best video ever!
Thank you!
Thank you very much! What a blessing. Got back my $160 (yeah, exactly, how did it get there?)!
Hi . I have that problem with cards that went to the back .. how can I do it for my 2016 Honda odyssey? Please help there are no video showing my car. Thanks again
Great vids on the 2013 Sienna!! Do you have any plans to make a video on how to replace the dashboard speakers? 😅
Hi Nrz Jam, Thank you for posting this video. My cup holder is shut and I am not able to get it to slide out in order to remove it. Any ideas as to how to get the sliding cup holder to open? Thank you.
I had this same thing happen. Used a pry bar to get it moved forward then opened like normal while applying pressure to pry bar
So why is my Subway card not important? 🤔
This helped me get the cup holder out of my 2011 Sienna. My problem is not lost items, but the cupholder won't stay closed.
There is a little piece way in the back which clearly engages with the main cupholder. It is supposed to be spring-loaded to one side or the other? If so, which way? Is this something that can be repaired? I fear that I'll have to remove a whole lot more of the car to fix it.
Pointers to other relevant videos appreciated.
i just fixed that problem, there is this little gear(4:17 in the video is where the gear is right beside the really sharp coil thingy. It clips backs in) at the underside of the cupholder. Mine popped out and i just had to push it back into the cupholder and it was fixed.
I had the same problem where my cupholder would not close and lock in place. Got it out with difficulty and found a yellow clip (think it was not supposed to be there) that looks like it may have caused it not to close. So what about the pin that looks like it may be supposed to be spring loaded one way or another? Any additional info appreciated.
❤❤❤❤
No need for masking tape. Just insert the spring into the slot with enough length and then insert the cupholder.
Great video. Talk about over engineering! I just wanted to pull it out to clean it. Forget that!
Exactly!
Beautiful ✅ do you or recommend any video how to unplug / remove 67002 dvd video player of 2011 sienna xle. Thanks
Hi, is your Sienna running into audio problems? Currently my DVD player isn’t working, I had to unplug it in order to get audio from speakers. Do you know if the DVD needs to be fixed/upgraded? Thx
This is the problem I have now ! th-cam.com/video/Lj8nqQXpLq0/w-d-xo.html
Mr CEBS th-cam.com/video/Umih0oyeGFE-/w-d-xo.html same issue here.. any solution??
Red Bus 75 yep, it seems to be a common issue with this JBL audio system, I’ve asked several audio car shops, they all say I have to replace DVD player and we’re talking about $400 - $700 so because I don’t have that money right now I bought a cheap headrest DVD player on Amazon ($140), for my 4 year old who’s constantly watching kids shows...whenever i earn extra money, I’ll fix the rear entertainment system.... This is how I fixed the issue with the speakers th-cam.com/video/Lj8nqQXpLq0/w-d-xo.html
Mr CEBS - thank you for sharing the video it helped me a lot to understand, so need to replace a dvd and entertainment center both or just dvd itself
Use the cards to get the cards out
No lo hagan así es más fácil de lonque parece solo hay que jalar ña lámina y con tus dedos se pone. Primero pones el refresque y hay espacio por la parte de abajo es solo logica
Yes, you are right.
Wow that copper h band has to be the worst design I have ever seen. Without hyperbole. Terrible design.