Man, that looks like alot of fun. I've scratch built MANY balsa planes in my life, these RTF foam planes have taken over though. I haven't built a balsa plane in years. I need to change that.
This is absolutely breathtaking! Not just the design but also the decals and choice of colours. To me as an absolute beginner, this looks like the right size and indeed not breaking the bank. Not too sure about the 3D printed parts, tough so if you might have any suggestions how to hand-build those parts, that would be greatly appreciated. Thank you for sharing this with us! It's very much appreciated!
Hello, thank you very much. I think this plane had one 3d printed part. This is intended to provide cooling to the ESC. It can also be left out and just make an hole in the fuselage
@@JamesRCPlaneTech I use a DJI action 2 camera. It is a very wonderful thing indeed. Super good image stabilizer, you can freely put it on a plane with a gas engine and there is really very stable picture. And most importantly, this camera is very small compared to the GOPRO itself. A good example here th-cam.com/video/fbCV8xnm3UI/w-d-xo.html
Incredible to say the least, you have a fortune invested in tools and equipment but yet you provide the plans for free, what laser do you use? Very nice . Pat
While adding sheeting/making the wing structure you should pin the win to the table. Otherwise you will have introduce inevitable (and uncontrollable) twist/bend in it.
Hi Marko, Amazing work, i really want to learn from you, it was my dream to make my own RC from childhood, can you tell me do you give any training to build RC ?
Hello Marko, Thank you for this recent Project, Would you let us know what model of Laser cut machine do you use for cutting the hardwood and Balsa wood?
Once again, amazing stuff Marco I have a question about the glue you use, EPS I think it was 🤔 what are the benefits of using it? Also, do you have a trick to glue hinges like that without getting glue in the hinge which makes it work poorly?
I use EPS foam glue because it does not create a sharp glue edge. The surface of the wing remains very beautiful and even. Gluing the hinges - that's one carving, isn't it? I usually use a small drop of oil on the hinge to prevent sticking after gluing. In addition, I recommend moving the rudder after 3-4 hours of drying, then the glue has not yet solidified and the end result will be very good.
Hello Of course, the main thing is experience, I have covered hundreds and hundreds of planes. But to get a beautiful result, it is good to use a heat blower. It must definitely have an adjustable temperature, and before using the blower, all edges of the covering film must be properly closed
Complimenti x le tue opere vorrei qualche dritta su come applichi il termoretraibile su un ala tutta rivestita in obeche, senza creare Bolle, io ho solo il ferrino. Ti ringrazio e di nuovo COMPLIMENTI x i tuoi lavori
Hi, Wingloading 36g/dm2. The wing has proper I spars and torsion. In reality, the wing is very, very strong and there is definitely no risk of breakage
Now this is more like it, simple to build, less resources and a beautiful stable model.....bravo. thank you so much for this project
Even though it’s “only” a simple plane, I love that it’s built to the same amazingly high standards as your bigger projects. 👏👏👏👏👏
thank you
Man, that looks like alot of fun. I've scratch built MANY balsa planes in my life, these RTF foam planes have taken over though. I haven't built a balsa plane in years. I need to change that.
Every time I watch one of your videos I learn some new little technique. Keep them coming.
Ok. Thank you very much
Beautiful build. Graphics and color choice really made your branding pop. Another perfect design 👌
thank you so much
This is absolutely breathtaking! Not just the design but also the decals and choice of colours. To me as an absolute beginner, this looks like the right size and indeed not breaking the bank. Not too sure about the 3D printed parts, tough so if you might have any suggestions how to hand-build those parts, that would be greatly appreciated. Thank you for sharing this with us! It's very much appreciated!
Hello, thank you very much. I think this plane had one 3d printed part. This is intended to provide cooling to the ESC. It can also be left out and just make an hole in the fuselage
Nice project.
Congratulations.
Thanks maestro
I like the color combinations ( grey, black and red tail ) nice models too Marko
Thanks
Another beautiful project, and a joy to watch as usual. Well done again👏👏👏
Thank you
Very good, great work!
Hello
Many thanks. I also watched your TH-cam channel and it is also very interesting.
Thank you! I appreciate that. Mind sharing what camera you are mounting on the plane? I use an older gopro but it’s a little heavy.
@@JamesRCPlaneTech I use a DJI action 2 camera. It is a very wonderful thing indeed. Super good image stabilizer, you can freely put it on a plane with a gas engine and there is really very stable picture. And most importantly, this camera is very small compared to the GOPRO itself. A good example here th-cam.com/video/fbCV8xnm3UI/w-d-xo.html
I enjoy the flying part of your videos always. Make it longer next time🍻
OK, thank you so much👍👍👍
Call this model the SkyLark. That’s the bird singing in the background towards the end of the video. Nicely made.
:):) thank you
good EYEBALLING alignment on the fuselage , i wonder if the tail and nose are precisely on the centerline but i guess close is good enough.
Bravo Marko 👍 Your work is first class.
Wowwwww.So great.👍
Incredible to say the least, you have a fortune invested in tools and equipment but yet you provide the plans for free, what laser do you use?
Very nice .
Pat
Hi, I use CO2 laser, 130w
Nice build and flight test ..
thank you
Very good looking plane. Love it 🫰🏻
Thank you
Excellent video....as always!
Gives new meaning to the term 'built like a tank'. Way overkill. But durable for the beginner.
Amazing Fast build😀
👍👍👍
Nice flight
You my friend are a artist.....
thank you :)
Great plane!!!!
While adding sheeting/making the wing structure you should pin the win to the table. Otherwise you will have introduce inevitable (and uncontrollable) twist/bend in it.
Very very very nice...❤❤❤❤
Hi, Thank you very much
I didn’t realize Vectric software could be used to draw plane parts. Good to know
That is fuego 🔥🌵🚀
Like before even watching :)😁
Hi Marko, Amazing work, i really want to learn from you, it was my dream to make my own RC from childhood, can you tell me do you give any training to build RC ?
your projects are fantastic congratulations, please make Bill Hempel Clipped Wing Piper 40%.
Awsome work my friend ! Like alway's ! It's not a freaking chinese product's ! 😂 they have to learn something from you ! 💙✈️👍
Hello Marko, Thank you for this recent Project, Would you let us know what model of Laser cut machine do you use for cutting the hardwood and Balsa wood?
Hi, CO2 laser 130w
Beautiful aircraft! Your video work is top-notch as well. What was the onboard camera? Also looking forward to the Gee Bee maiden flight. Thanks!
hi, onboard camera DJI ACTION 2
Love your content ❤
Can you do twin motor same design
ok, why not
@@markoroolaid thank you so much I really appreciate it
😍😍😍😍😍👏👏👏👍👍👍bellooo🙋♂️🙋♂️🙋♂️
Thank you
it's almost May! gee bee maiden is coming?
Gee Bee soon, soon
Personally I think a wing with more of a dihedral angle is better for beginners
Once again, amazing stuff Marco
I have a question about the glue you use, EPS I think it was 🤔 what are the benefits of using it?
Also, do you have a trick to glue hinges like that without getting glue in the hinge which makes it work poorly?
I use EPS foam glue because it does not create a sharp glue edge. The surface of the wing remains very beautiful and even. Gluing the hinges - that's one carving, isn't it? I usually use a small drop of oil on the hinge to prevent sticking after gluing. In addition, I recommend moving the rudder after 3-4 hours of drying, then the glue has not yet solidified and the end result will be very good.
@@markoroolaid cheers! Love your videos
incredible covering, how do you get such a glossy finish?
Hello
Of course, the main thing is experience, I have covered hundreds and hundreds of planes. But to get a beautiful result, it is good to use a heat blower. It must definitely have an adjustable temperature, and before using the blower, all edges of the covering film must be properly closed
Sickkk
Chicken Cloud at 16:10 🐔🍗
it really is, very cool
Complimenti x le tue opere vorrei qualche dritta su come applichi il termoretraibile su un ala tutta rivestita in obeche, senza creare Bolle, io ho solo il ferrino. Ti ringrazio e di nuovo COMPLIMENTI x i tuoi lavori
ok, capisco che stai usando un adesivo ma copri l'ala con la pellicola Oracover e otterrai un ottimo risultato
How is the wing loading? You didn´t reinforce the wing, so i would be a little bit worried that the wing couldn´t handle harder maneuvers...🤷♂
Hi, Wingloading 36g/dm2. The wing has proper I spars and torsion. In reality, the wing is very, very strong and there is definitely no risk of breakage
I wish it had a landing option too, I'm not so lucky to have a grass field like that 😢
👍👍👍❤️❤️❤️
Can you buy this kit?
Hi, NO!!! Building models is just a hobby for me
Craftsman
Comment