Hey Bob, how about a rope Bridge. The columns would be separate from both structures, so you can make sure it's secure, then lay the deck attached by rope on it. It sounds very challenging but at the end it's a basic statics problem. A big downside is the loss of one of the 4 walls functionality.
Yeah rope bridge or the kind with the wooden planks/logs chained to each other. I used to work at an outdoor centre with an area like this, you can get pretty creative. We built a massive swing between two trees over a small river, and a giant pole you climbed up and had to stand on the top of before jumping off. All of it was done wearing a harness with someone belaying though so we could make pretty intense things that felt far more dangerous than they were.
Even though 2 feet is deep enough for the frost line, but also the height and weight of the structure may impact how deep the structure/footings should be. In an area where there are nasty winds, it may need deeper footings to keep it from becoming a sail.
@@Iliketomakestuff I thought about that, but just wanted to mention it. Our area doesn't have many trees and we have had several days just this year where there have been sustained winds 60+ MPH, so I am thinking about that.
The standard rule I learned was a third of your height above ground should be how far you go into the ground so for a 10 foot tall structure you should be 3.3 feet in the ground.
In our industry we add 1/2" screws to each t-nut to keep them from rotating in the future. Might be a good idea what with it being outside. Looks great!
If you want to use metal for the core and you need suggestions feel free to as me. I build one a year ago and it's super fun. (8m² on the outside, attached to house walls)
Next on "I Like To Make Stuff" , Building a first aid station at the Farm. 😀 In all seriousness I would definitely put something soft (sand/mulch) around the climbing wall, it may not be that high but even a 6 inch drop can bugger up an ankle pretty good.
@@TactileLoki If you think packed dirt is soft you apparently never landed on your ass after slipping off a swing or hitting the end result of a slide, I'd much rather land in mulch.
You may want to check what your t-nuts and bolts are made of. I built a similar climbing wall 2 years ago and all of the handhold bolts and t-nuts are rusting. The ones I used looked the same as yours and they came in a kit that was meant for outdoor use. If I could go back I would have either used something different or I would have sprayed the hardware with something while I was installing it.
SO cool! Did I miss the part where there's a finish put on the structure? Won't the exposed plywood get pretty damaged with a lot of rain? Or would it just be cosmetic?
I like using the Tnut with a flange with screw holes in them, Lowe’s has zinc coated ones but some online places have the stainless version for a few cents more. Way easier install, and I use them in other woodworking projects as well. Now you need to build a crack out of bondo, we did that years ago on a 2x12 I think about 12’ long. Forget how many gallons of bondo went into it with an aluminum foil base to take up some room and get a rough structure going. We put it on a 7’ tall fence and had the bottom start at about 3’ off the ground, we quickly got in trouble at the camp and had to move it to a less seen area. With the price of plywood right now, the climbing holds might be the cheapest part of a climbing wall LOL.
You could make a cool draw bridge that moves and is attached to the tree house, a rope bridge, or install rope netting, almost like a hammock, that way it could be a cool place to lie out and chill. Great job on this! I totally would hang out inside the climbing wall!
Awesome, love rock climbing! Should probably have some fall mats just in case maybe? For another project, you should make your own disc golf baskets, and setup a small course on your farm property! Looks like a good amount of space for it.
19:11, that wedge shaped hole looks like a good finger remover. Probably best to stick a block of wood in the bottom of the triangle so it doesn't narrow down to a pinch point. I see the younger boy using the side of the 2x4 as a hold so hands are going in there and as it's easier to hold than one of the grips it'd probably be the last to let go if you fall.
Could you please do a bits video on the different kinds of screws for an application like this? I've heard of drywall and decking screws before, but I'm not sure what you mean when you say "structural screws". It'd be nice to have some guidance on how to differentiate between them all when I'm planning out a project and going to the store to purchase them.
about that connection: either a rope bridge as already suggested or an overhanging climbing section with some kind of bridge on top. With that section, you'd have a rather difficult climbing section and an easy way to get over from the plattform.
Great build! One thing I’d point out is the side where you have a vertical slit open into the interior between the two faces, it seems to taper down into a sharp V at the bottom? If someone were to put their hand/arm in there then slip off the wall, their limb could easily become jammed in the V section. Would cover that opening up with plywood. Looking forward to seeing how you connect the two platforms. Getting lots of ideas here !
Fireman pole in the center leading out from the bottom would be neat too. And maybe some climbing bolts to add climbing ropes for practicing lead climbing, rappel, etc.
Pretty cool climbing wall. I built one in my garage years ago to help train during the off season. One trick I did was to use liquid nails on the back of the t-nuts to make sure they didn't pop out the back and fall back behind the wall. Saved me from having to pull a whole panel down to retrieve a loose t-nut. Thanks for sharing 👍
That's a fabulous structure with a lot of potential. Nothing as complex as yours, but when I was ten my father built me a seven foot high platform at the bottom of the garden. There was a ladder to get up to the platform and to get down there was a wooden slide and a foreman's pole made from a scaffold pole that went through s hole in the platform. Later we added walls round the top made from fencing panels. I and my friends had a lot of fun with that structure. It lasted about five or six years.
I had a thought from the start, I'd use the inside as a place to store my extra holds, making sure to keep them from getting wet. Means, as you find more interesting holds, you can keep them all together in one place and reset the climbs with all the major components nearby
The rope bridges seen on a lot of playgrounds would probably be the best... or if you wanted something different, maybe a "tightrope" with rails across.
19:41 how about making a jungle rope bridge.. •laying a net until shaped like a “V” •use 1 cable wire for each side at the top of that “V” shaped net •then placing a wood plank at the bottom (pointed) of “V” shaped net .. • • \ / \🧍🏻 / \ = / \ / Clue: 🧍🏻 -> person \/ -> “V” Shaped net = -> wood plank • -> Cable wire 🙂👍🏼
To connect the climbing tower to the zip line platform you could make a chain Bridge. I had one on my fort growing up. My dad used four chains and bolted 2x4s for the walkway to two of the bottom ones and the top were the rails.
Hey, really nice project. One lesson I learned when I've build mine was to replace hammer-in t-nuts with screw-in t-nuts. Spinning t-nut is a disaster and it happened to me several times.
Love this! The farm seems like it's getting more fun with every video. An idea for how to connect them would be a legit Indiana Jones style rope and slat bridge. Even a rope balance bridge (three strands) would be fun too!
Cool build, Bob! Suggestion for the future - Instead of a concrete block (which will eventually sink into the ground) to shore up the middle of the sagging framing, a 2x6 or 2x8 screwed into the side of the bottom plate should provide plenty of resistance to deflection... Think deck joist... To be fair - the plywood sheathing may be enough shear resistance to keep things from sagging too.
Hola! 🖐 That looked like it was loads of fun. To connect the two, how about a type of bridge that is weirdly shaped above and monkey bars or rings below to make it more challenging. That would be fun, maybe. Take care and have a good one, Adios! 👊
You could have a drone shadow you during one of your favorite climbs, then recreate it with a 3D printer, then use that as your model. Idk. Reminded me of how they recreate room layouts to run through for tactical training. Simulate floor plans, simulate rock faces
to prevent that sag, you could also connect a 2x4 down on the inside to the center where the sag is. I think your 2x6 or 2x8 you are using can sure up that load.
Connect the two with a rope bridge. Similar to Temple of Doom. Lol (Edit) well after scrolling a bit, it seems it is a popular idea. Lol (Edit 2) Almost forgot, as you were building it, I thought a climbing rope(s) would be an added source of fun, and secrete exercise. Maybe one with knots for added assistance or a straight rope. Or one of each off the back corners.
Awesome! Definitely need some kind of fall protection though. Given its outside, matts might get ruined so instead maybe some of that pine bark they have around the swings at playgrounds, or something similar (there are some with rubber too I think). Would hate to see someone slip and fall near the top and hit the hard ground.
drawbridge. was thinking rope bridge but that would be more fun for a longer span. and knowing you there will be one of those later. for this short span a drawbridge connecting the two would probably be pretty fun.
Have you seen a Monkey Bridge? Only requires three main ropes/cable. One to walk on and then one for each hand. Then use smaller rope/cord to connect each hand rope down to the walking rope/cable. The shape of a V. used to build them at Scout camp or large camping events. Have you considered adding a Peg Board on one side. Helps with advanced climbers to improve hand eye coordination, plus even more strength.
Hey Bob, how about connecting the two platforms via a metal chain bridge with rope rails and possible wooden runner beam at base? Would be good to see mix of metal work, woodwork and then work with creating rope handrails
As someone who used to build outdoor climbing structures professionally your top plywood edges are going to soak up rain/snow and will delaminate the plywood within probably 3 years if you don’t seal it really well. It can be really hard to seal the edges of that cheaper plywood because of the gaps. But you definitely need to put something on it to protect it from water.
You're lucky to be able to build something like that the raw way. Where I live, that would be taken apart by wind, weather and thermites in about 12 months.
Could connect the tower to the tree-house with one or more of those V shaped rope bridges where it's got one thick one to walk on and two hand rail ropes?
Could put a solid floor to connect the two platforms then underneath it you could have a climbing roof parallel to the floor which would add some challenging routes for training/stronger climbers. You would want to buy a bouldering pad for a roof tho as you wouldn't want to land on the floor with your back.
My only thought for what I would do differently is to make surround on the upper deck "meet code" for deck railings. That is to say, I would bring the climbing wall sides up so the top us 30 inches above the deck floor. It's a small thing, but it's bothering my OCD to see those "low" walls...
I really like your work on this climbing wall. I would consider making an entry hatch at one side, if you ever need to go inside the tower. So you don't have to unscrew a whole panel in a couple of years. Btw. I've seen you signing the Crimson Guitar build on the Makers Central!
@8:30, I saw another video where a guy used that foam for a fence post. It didn’t work out. The foam kind of shrank a bit away from the posts. Good idea, but maybe it was just the wrong material.
Great job on the climbing wall Bob! maybe you could connect the to buildings together with a rope bridge or something that you could climb threw to get to the other side :) anyways Thanks for sharing the video with us!👍💖😎JP
the classic inside gymnasium wall is basically the same idea but with steel framing and resin and sand for a fake rock texture (they also did fiberglass structure with super fancy geometry, but that's a whole other level ^^")
I connected two towers for my climber on the bottom is a swing beam and soon to be monkey bars (he has swinging ropes, rocks, etc in our basement ceiling) On the top, I am putting planking for a catwalk/bridge way to the loft of the second structure. It is still a work in progress but thanks to this video, the climbing tower is ready for an upgrade away from the straight vertical. Could you talk about the fall safety of such a structure? The searches have lead me to think it needs somewhere between grass and huge amounts of mulch with a tangent of people saying rubber padding. I can add mulch but I would like to keep things natural as much as possible and sustainable. Thanks Bob and ILTMS Team
Very cool project, those triangle tapers came out really nice. Also the top of that seems like a great spot to put a nerf gun turret. Actually that whole yard seems like an epic nerf war waiting to happen!
Connect it using a swing bridge. Where the steps are separate wooden swings connected by chains. Also are you not worried about children falling onto sharp sticks/stones?
to connect the two things for sure add monkey bars if it would be safe underneath and then for above you could do something like a net with a close weave to walk across
I would say a cargo-net would be a nice way to connect the two like on American Gladiators during the Eliminator round, but it probably wouldn't be safe or protected well enough from the elements. 😏
I think you need a bouncy bridge to connect them. Y'know rails but the planks like an Indiana jones scene. Rather than rope, maybe some sort of metal hinges or fasteners. I'm sure you'll put some rails on that tower, and fill in the gaps. Looks like a good time!
Whatever connects the two platforms should double as monkey bars or something you can climb on from the bottom. That way the wall under the bridge can still be used to climb. You just add a new feature
Would monkey bars or swinging ropes be a project you would be interested in adding to this? I see already you're planning on a rope bridge. These projects look like so much fun!
You probably want to drill a hole in each of the bolt holds and add a screw to stop them from spinning, especially on an outdoor wall that will expand and contract with the weather. The holds will start to spin eventually and someone will likely get dumped on their head.
As long as the plywood is securely fastened to the wall frame, the wall will act like a beam. No need for center supports. Longer (over 8') walls won't work that way, because of seams in the plywood.
Hey Bob, how about a rope Bridge. The columns would be separate from both structures, so you can make sure it's secure, then lay the deck attached by rope on it.
It sounds very challenging but at the end it's a basic statics problem.
A big downside is the loss of one of the 4 walls functionality.
Love this idea!
I scrolled down to the comments just to say "rope bridge." :)
Yeah rope bridge or the kind with the wooden planks/logs chained to each other.
I used to work at an outdoor centre with an area like this, you can get pretty creative. We built a massive swing between two trees over a small river, and a giant pole you climbed up and had to stand on the top of before jumping off. All of it was done wearing a harness with someone belaying though so we could make pretty intense things that felt far more dangerous than they were.
Came here to suggest a rope bridge as well. That would be killer and would be a great learning experience on how to make one.
A rope bridge would definitely be badass
Even though 2 feet is deep enough for the frost line, but also the height and weight of the structure may impact how deep the structure/footings should be. In an area where there are nasty winds, it may need deeper footings to keep it from becoming a sail.
True, but this structure is deep in a thick patch of trees that will hopefully help dampen the wind.
@@Iliketomakestuff I thought about that, but just wanted to mention it. Our area doesn't have many trees and we have had several days just this year where there have been sustained winds 60+ MPH, so I am thinking about that.
The standard rule I learned was a third of your height above ground should be how far you go into the ground so for a 10 foot tall structure you should be 3.3 feet in the ground.
@@DavidLeeKersey good to know
Could always build some “outriggers” that tie to deeper anchors if it ever becomes an issue.
In our industry we add 1/2" screws to each t-nut to keep them from rotating in the future. Might be a good idea what with it being outside. Looks great!
I definitely need to build one of these, if for no other reason than making it NOT perfect is totally acceptable, and actually almost preferred! 🤣
Just got to be sure it's still stable. 🤣
If you want to use metal for the core and you need suggestions feel free to as me. I build one a year ago and it's super fun. (8m² on the outside, attached to house walls)
Next on "I Like To Make Stuff" , Building a first aid station at the Farm. 😀
In all seriousness I would definitely put something soft (sand/mulch) around the climbing wall, it may not be that high but even a 6 inch drop can bugger up an ankle pretty good.
I was going to say. “I hope your home owners insurance is paid up”
If you think mulch is soft you obviously never played on a playground with mulch
@@TactileLoki mulch is still better than rose and berry bushes.
@@TactileLoki If you think packed dirt is soft you apparently never landed on your ass after slipping off a swing or hitting the end result of a slide, I'd much rather land in mulch.
Hopefully he has some mobile crash pads he can bring out there.
You may want to check what your t-nuts and bolts are made of. I built a similar climbing wall 2 years ago and all of the handhold bolts and t-nuts are rusting. The ones I used looked the same as yours and they came in a kit that was meant for outdoor use. If I could go back I would have either used something different or I would have sprayed the hardware with something while I was installing it.
I think ur supposed to use galvanized nails bc most screws don’t have shear strength so when climbing a screw could easily snap in half 😨
SO cool! Did I miss the part where there's a finish put on the structure? Won't the exposed plywood get pretty damaged with a lot of rain? Or would it just be cosmetic?
Pressure treated doesn’t need finish outside
I like using the Tnut with a flange with screw holes in them, Lowe’s has zinc coated ones but some online places have the stainless version for a few cents more. Way easier install, and I use them in other woodworking projects as well.
Now you need to build a crack out of bondo, we did that years ago on a 2x12 I think about 12’ long. Forget how many gallons of bondo went into it with an aluminum foil base to take up some room and get a rough structure going. We put it on a 7’ tall fence and had the bottom start at about 3’ off the ground, we quickly got in trouble at the camp and had to move it to a less seen area.
With the price of plywood right now, the climbing holds might be the cheapest part of a climbing wall LOL.
You could make a cool draw bridge that moves and is attached to the tree house, a rope bridge, or install rope netting, almost like a hammock, that way it could be a cool place to lie out and chill. Great job on this! I totally would hang out inside the climbing wall!
I also love the idea of a rope bridge to connect the two. Simple and fun
Awesome, love rock climbing! Should probably have some fall mats just in case maybe? For another project, you should make your own disc golf baskets, and setup a small course on your farm property! Looks like a good amount of space for it.
Bob already has. Just search up disc golf on his channel.
Could use the climbing wall thing as a storage shed to hold the mats when not in use
Great work, looks amazing. Maybe you could connect the two builds with a rope bridge with wooden steps.
That's the plan!
19:11, that wedge shaped hole looks like a good finger remover. Probably best to stick a block of wood in the bottom of the triangle so it doesn't narrow down to a pinch point. I see the younger boy using the side of the 2x4 as a hold so hands are going in there and as it's easier to hold than one of the grips it'd probably be the last to let go if you fall.
Could you please do a bits video on the different kinds of screws for an application like this? I've heard of drywall and decking screws before, but I'm not sure what you mean when you say "structural screws". It'd be nice to have some guidance on how to differentiate between them all when I'm planning out a project and going to the store to purchase them.
The inside would make a great fort! And you can use craft paper and a staple gun to make quick templates for the plywood.
about that connection: either a rope bridge as already suggested or an overhanging climbing section with some kind of bridge on top. With that section, you'd have a rather difficult climbing section and an easy way to get over from the plattform.
Great build!
One thing I’d point out is the side where you have a vertical slit open into the interior between the two faces, it seems to taper down into a sharp V at the bottom? If someone were to put their hand/arm in there then slip off the wall, their limb could easily become jammed in the V section. Would cover that opening up with plywood.
Looking forward to seeing how you connect the two platforms. Getting lots of ideas here !
Fireman pole in the center leading out from the bottom would be neat too. And maybe some climbing bolts to add climbing ropes for practicing lead climbing, rappel, etc.
That Spider animation of them going over the screen almost made me throw my phone 🤣🤣 keeping us on our toes
Pretty cool climbing wall. I built one in my garage years ago to help train during the off season. One trick I did was to use liquid nails on the back of the t-nuts to make sure they didn't pop out the back and fall back behind the wall. Saved me from having to pull a whole panel down to retrieve a loose t-nut. Thanks for sharing 👍
Rope bridge would be awesome to connect the 2 structures.... or rope with wooden slats to walk on
That's a fabulous structure with a lot of potential.
Nothing as complex as yours, but when I was ten my father built me a seven foot high platform at the bottom of the garden. There was a ladder to get up to the platform and to get down there was a wooden slide and a foreman's pole made from a scaffold pole that went through s hole in the platform. Later we added walls round the top made from fencing panels.
I and my friends had a lot of fun with that structure. It lasted about five or six years.
I had a thought from the start, I'd use the inside as a place to store my extra holds, making sure to keep them from getting wet. Means, as you find more interesting holds, you can keep them all together in one place and reset the climbs with all the major components nearby
The rope bridges seen on a lot of playgrounds would probably be the best... or if you wanted something different, maybe a "tightrope" with rails across.
This is SO incredibly awesome.
Thanks!
19:41 how about making a jungle rope bridge..
•laying a net until shaped like a “V”
•use 1 cable wire for each side at the top of that “V” shaped net
•then placing a wood plank at the bottom (pointed) of “V” shaped net ..
• •
\ /
\🧍🏻 /
\ = /
\ /
Clue:
🧍🏻 -> person
\/ -> “V” Shaped net
= -> wood plank
• -> Cable wire
🙂👍🏼
Nicely done. For connecting them try including some kind high ropes course.
To connect the climbing tower to the zip line platform you could make a chain Bridge. I had one on my fort growing up. My dad used four chains and bolted 2x4s for the walkway to two of the bottom ones and the top were the rails.
Heck yeah! And and under cling wall over to the platforms posts would be cool!
For the connection. You should do an arch bridge with stationary or swinging monkey bars underneath.
Looks like a fun time!
It really is!
Suspension bridge! Bonus points for painting it rust-colored and adding lane lines and tiny little car stickers. And Starfleet headquarters.
Hey, really nice project. One lesson I learned when I've build mine was to replace hammer-in t-nuts with screw-in t-nuts. Spinning t-nut is a disaster and it happened to me several times.
Love this! The farm seems like it's getting more fun with every video.
An idea for how to connect them would be a legit Indiana Jones style rope and slat bridge. Even a rope balance bridge (three strands) would be fun too!
Hay Bob… looks awesome.. the connections got to be a rope bridge surely 👍🏻
Keep up the good work 😊
Thats a perfect spot for a rope and plank bridge! Excellent skills to learn plus it looks super dope!
That looks dangerously awesome.
Cool build, Bob! Suggestion for the future - Instead of a concrete block (which will eventually sink into the ground) to shore up the middle of the sagging framing, a 2x6 or 2x8 screwed into the side of the bottom plate should provide plenty of resistance to deflection... Think deck joist... To be fair - the plywood sheathing may be enough shear resistance to keep things from sagging too.
Cave style climbing wall bridge, so you could climb on the underside of the bridge!
Hola! 🖐 That looked like it was loads of fun. To connect the two, how about a type of bridge that is weirdly shaped above and monkey bars or rings below to make it more challenging. That would be fun, maybe. Take care and have a good one, Adios! 👊
This seems awesome. I wish I could make one and make it look like a castle gate. Some nice overhang options and would look awesome
You could have a drone shadow you during one of your favorite climbs, then recreate it with a 3D printer, then use that as your model. Idk. Reminded me of how they recreate room layouts to run through for tactical training. Simulate floor plans, simulate rock faces
This is awesome.
I appreciate it!
You could put the platforms together with a type of bridge (like a swaying bridge) for fun and/or a tunnel of sorts
to prevent that sag, you could also connect a 2x4 down on the inside to the center where the sag is. I think your 2x6 or 2x8 you are using can sure up that load.
Fantastic work, Bob! 😃
It's going to be a pretty fun place there!!!
Stay safe there with your family! 🖖😊
Connect the two with a rope bridge. Similar to Temple of Doom. Lol
(Edit) well after scrolling a bit, it seems it is a popular idea. Lol
(Edit 2) Almost forgot, as you were building it, I thought a climbing rope(s) would be an added source of fun, and secrete exercise. Maybe one with knots for added assistance or a straight rope. Or one of each off the back corners.
Done is better than perfect! Looks like fun. 🙃
That wall is awesome!!! You should connect the platform with a rope bridge 😁
Awesome! Definitely need some kind of fall protection though. Given its outside, matts might get ruined so instead maybe some of that pine bark they have around the swings at playgrounds, or something similar (there are some with rubber too I think). Would hate to see someone slip and fall near the top and hit the hard ground.
drawbridge. was thinking rope bridge but that would be more fun for a longer span. and knowing you there will be one of those later. for this short span a drawbridge connecting the two would probably be pretty fun.
If it looks straight, it is straight! 😜. Great project, Bob!
Connect them with a rope bridge!
It's a unique project and will be interesting to see you figure it out.
Have you seen a Monkey Bridge? Only requires three main ropes/cable. One to walk on and then one for each hand. Then use smaller rope/cord to connect each hand rope down to the walking rope/cable. The shape of a V. used to build them at Scout camp or large camping events. Have you considered adding a Peg Board on one side. Helps with advanced climbers to improve hand eye coordination, plus even more strength.
Hey Bob, how about connecting the two platforms via a metal chain bridge with rope rails and possible wooden runner beam at base? Would be good to see mix of metal work, woodwork and then work with creating rope handrails
As someone who used to build outdoor climbing structures professionally your top plywood edges are going to soak up rain/snow and will delaminate the plywood within probably 3 years if you don’t seal it really well. It can be really hard to seal the edges of that cheaper plywood because of the gaps. But you definitely need to put something on it to protect it from water.
Deffo connect then with a rope bridge! Would look so good! You could also get a slide or fireman’s pole to come off one of them
You're lucky to be able to build something like that the raw way. Where I live, that would be taken apart by wind, weather and thermites in about 12 months.
That's a shame.
Thats looks awesome! Although,warching you stand on the thing while making it made my anxiety skyrocket. I dont do well with heights.
maybe you can build a bridge to walk on and you could put climbing holds below it to have a nice overhang and a good training space
Connect them with a rope bridge! I’m making my son a tree house and would love to see how you guys would do it.
Looks amazing! I want to build something like this in my basement at some point.
Could connect the tower to the tree-house with one or more of those V shaped rope bridges where it's got one thick one to walk on and two hand rail ropes?
Connect the two platforms with a rope bridge. You could put some two by fours on the bottom and connecting with rope then have ropes for handles.
Could put a solid floor to connect the two platforms then underneath it you could have a climbing roof parallel to the floor which would add some challenging routes for training/stronger climbers. You would want to buy a bouldering pad for a roof tho as you wouldn't want to land on the floor with your back.
My only thought for what I would do differently is to make surround on the upper deck "meet code" for deck railings. That is to say, I would bring the climbing wall sides up so the top us 30 inches above the deck floor. It's a small thing, but it's bothering my OCD to see those "low" walls...
I really like your work on this climbing wall. I would consider making an entry hatch at one side, if you ever need to go inside the tower. So you don't have to unscrew a whole panel in a couple of years.
Btw. I've seen you signing the Crimson Guitar build on the Makers Central!
@8:30, I saw another video where a guy used that foam for a fence post. It didn’t work out. The foam kind of shrank a bit away from the posts. Good idea, but maybe it was just the wrong material.
looks great, love to have one. you should do a single line rope bridge with guides.
Great job on the climbing wall Bob! maybe you could connect the to buildings together with a rope bridge or something that you could climb threw to get to the other side :) anyways Thanks for sharing the video with us!👍💖😎JP
Having seen my parents build climbing walls professionally my whole life, this video is a different kind of watch for me ^^"
the classic inside gymnasium wall is basically the same idea but with steel framing and resin and sand for a fake rock texture (they also did fiberglass structure with super fancy geometry, but that's a whole other level ^^")
I connected two towers for my climber on the bottom is a swing beam and soon to be monkey bars (he has swinging ropes, rocks, etc in our basement ceiling) On the top, I am putting planking for a catwalk/bridge way to the loft of the second structure. It is still a work in progress but thanks to this video, the climbing tower is ready for an upgrade away from the straight vertical. Could you talk about the fall safety of such a structure? The searches have lead me to think it needs somewhere between grass and huge amounts of mulch with a tangent of people saying rubber padding. I can add mulch but I would like to keep things natural as much as possible and sustainable. Thanks Bob and ILTMS Team
Rope bridge from the deck of the wall to the tree house. If you like to make stuff, try to use plastic grocery bags to twist into rope.
Rope bridge is always fun
Very cool project, those triangle tapers came out really nice. Also the top of that seems like a great spot to put a nerf gun turret. Actually that whole yard seems like an epic nerf war waiting to happen!
Connect it using a swing bridge. Where the steps are separate wooden swings connected by chains.
Also are you not worried about children falling onto sharp sticks/stones?
Natural selection
to connect the two things for sure add monkey bars if it would be safe underneath and then for above you could do something like a net with a close weave to walk across
I would say a cargo-net would be a nice way to connect the two like on American Gladiators during the Eliminator round, but it probably wouldn't be safe or protected well enough from the elements. 😏
We need more American Gladiator elements in the world. Great Idea!
Doesn't the plywood suffer outside from the rain and sun? Does it need be varnished or treated in some way to make it last?
My dad was a climber and always wanted something in his backyard. I really liked how you changed the idea as you went!
Rope bridge would be sick
Hi Bob,
I'd like to see the process of augering the holes. How do you get 4 holes that are all square toeach other?
I think you need a bouncy bridge to connect them. Y'know rails but the planks like an Indiana jones scene. Rather than rope, maybe some sort of metal hinges or fasteners. I'm sure you'll put some rails on that tower, and fill in the gaps. Looks like a good time!
Perfect spot for a rope bridge. Do one like the ones that always fall in the movies but of course make one that doesn’t fall.
how long do you expect the plywood to last outside in the elements?
Whatever connects the two platforms should double as monkey bars or something you can climb on from the bottom. That way the wall under the bridge can still be used to climb. You just add a new feature
You should build a hangning bridge with cables. Cables on each side and planks hold on cables.
What are you do about weather raw plywood like that Will easily deteriorate with rain
Would monkey bars or swinging ropes be a project you would be interested in adding to this?
I see already you're planning on a rope bridge.
These projects look like so much fun!
After watching the video, maybe not as a way between these two structures. That might be a bit dangerous.
You probably want to drill a hole in each of the bolt holds and add a screw to stop them from spinning, especially on an outdoor wall that will expand and contract with the weather. The holds will start to spin eventually and someone will likely get dumped on their head.
Rope bridge maybe for connecting platforms?
For the top connection, maybe a rope bridge with rope handles on the sides
Rope Bridge! Giant Hammock!
Holy crap my boys would love this…..
Hey Bob! You should use a robe bridge or monkey bars to connect both structures :)
How did you manage to preserve the wood over time? rain, sun...
i second the rope bridge idea! do you think you're gonna expand the play structure any more than that?
Loving the build but I think you should use Joist Hanger Nails/Twist Nails not screws on the joist hangers. Screws dont have the shear strength.
Do you need to treat the plywood in any way to weather proof it?
I'd suggest a rope bridge (probably a three rope bridge) between the two platforms.
As long as the plywood is securely fastened to the wall frame, the wall will act like a beam. No need for center supports. Longer (over 8') walls won't work that way, because of seams in the plywood.