I ran across your channel and have subscribed. I have loved watching you with your TX200 along the way. I have an Air Arms S510 XS and absolutely love the quality. I have been wanting a TX200 for quite a while. I think I will buy one soon. Your videos have pushed me to it!! I love shooting the springer rifles. I have a HW97k and will soon have a TX200 hopefully. Anyway.....I have learned from your videos and enjoy very much!! It would be so much fun to shoot HFT.
Tema de reflexión: muchos tiradores olímpicos de carabina y pistola personalizan sus culatas y cachas de fábrica ( ningún tirador es igual a otro antropométricamente hablando), se pueden personalizar las culatas con plastilina epoxica ( no es muy estético) pero convierte la empuñadura en un guante que coloca la mano siempre en la misma posición...que es lo que se logra con las carabinas de 10 mts que son totalmente ajustables...
Hi Luis, thanks for another great video. Great of you to share all your experiences with us all. I changed my internals to a 12 ft lb Vortek PG4 tune kit and love it! More consistent and accurate. I have ordered a Gary Cane custom stock which I should be getting sometime in March. From what I can see he makes beautiful stocks that perform well. I’ll let you know how everything works when I get it. One question, in the video, when you reassemble your gun, you coat the outside of it with something that looks like grease before you put the stock back on. What is it and why??? Thanks again.
Great video, thanks. The assembly looks simple and quick... Did you grease the components first and what is the "grease" you used on the barrel before mounting it in the stock?
En tu video de posición de parado, se nota que acercas la cara para alcanzar mira, tu cabeza se ve inclinada, si le poner una cantonera ajustable ROWAN, podrías lograr una mejor postura de cabeza y cuello ( más natural) sin necesidad de modificar la culata de fábrica, por otro lado está el tema del Hamster ( que no sé si sea limitante en tu categoría) Rowan tiene un modelo que no implica perforara culata original...Saludos
Luis great video - the TX 200 shoots to the right - I believe this is caused because the piston is free to rotate in the tube hence the springs twisting movement propelling it clock-wise / so it needs some kind of brake to prevent it happening or may be a stronger spring to act like a buffer-brake to put a stop to the piston rotating so much. First stage of the trigger may only need 2mm or 3mm of adjustment to cut down its travel. And also using a heavier scope will also cut down recoil. Hope this is of real help Cheers 👍
Thanks. That's an advanced course on physics. Just by repositioning the finger and proper control on release it was ok. Maybe with more time I can se further... Keep safe.
Consulta Coach: sobre los KITS DE TUNING ( Vortek, Macari, TBT) cuál has usado, cuál recomiendas, sé que usas TX-200 y que muchos que tiran con riflE de de resorte prefieren TX-200 o Weinrauc 77,97...pero yo tengo un Diana 54 de 1998...( sigue vigente en catálogo Diana 2020) en México no hay Distribuidor de Diana, así que he tenido que buscar y buscar en EBAY...
No hay ni en inglés, ni en español un video que hable sobre cómo elegir un AA-TX-200 para Field Target 1) MK3 2) HC 3) PRO SPORT, si mides X estatura ( largo de antebrazo, altura de cuello), tomando en cuenta que FT es un deporte de presición, sabemos que la ergonomía y la balística son temas fundamentales para lograr eficiencia en armonía tirador/equipo. Por ejemplo: ¿Qué culata se adapta mejor para tiradores de estatura baj, media, alta? ¿Las tres culatas : MK3, HC, PROSPORT, reciben bien accesorios Rowan para lograr mejor acomodo de encare ( cantonera ajustable, hamster)? Puede ser un tema de interés de AA para asesoría de sus clientes, puede ser un tema de reflexión entre tiradores( aunque los ajustes del equipo sean personales y secretos competitivos)... SALUDOS DESDE MÉXICO
Ola Bruno! Não tem revendedor. É mesmo fale com ele, encomendar, pagar e esperar. Depois ainda pára na alfândega para mais iva e taxas… De outra forma só um kit usado ou se tiver alguém que venha de férias que lhe possa trazer…
Hi. Both very good airguns. I chose TX over HW 97 because TX is MUCH EASYER to do maintenance; it has lots of after market kits and it is prettierthan hw. Easy.
Hi, thank you very much for this useful video, I also have a TX 200 HC from field target, please tell me where I can order the Tony Leach Kit ? Thank you
Felicitaciones por el video, por el rifle, por las mejoras. Yo para resorteros prefiero una culata pesada de multilaminado de Gary Cane. Con un gancho que agarro solo por debajo...
springers forever !
Thanks for the video.. I chose the Weihrauch 97 they make there own barrels. Also just feels better in the hand.
Thank you for the subtitles. An adjustable but pad would help positioning as well.
I ran across your channel and have subscribed. I have loved watching you with your TX200 along the way. I have an Air Arms S510 XS and absolutely love the quality. I have been wanting a TX200 for quite a while. I think I will buy one soon. Your videos have pushed me to it!! I love shooting the springer rifles. I have a HW97k and will soon have a TX200 hopefully. Anyway.....I have learned from your videos and enjoy very much!! It would be so much fun to shoot HFT.
Thank you. TX is really a very nice airgun. I'm in love with mine.
Whatch out for the next episode...
Broken internals??
:)
Tema de reflexión: muchos tiradores olímpicos de carabina y pistola personalizan sus culatas y cachas de fábrica ( ningún tirador es igual a otro antropométricamente hablando), se pueden personalizar las culatas con plastilina epoxica ( no es muy estético) pero convierte la empuñadura en un guante que coloca la mano siempre en la misma posición...que es lo que se logra con las carabinas de 10 mts que son totalmente ajustables...
Great review! Keep up the good work. 👍🇬🇧
Thanks Mate.
Watch out today.... New video.
;)
Hi Luis, thanks for another great video. Great of you to share all your experiences with us all. I changed my internals to a 12 ft lb Vortek PG4 tune kit and love it! More consistent and accurate. I have ordered a Gary Cane custom stock which I should be getting sometime in March. From what I can see he makes beautiful stocks that perform well. I’ll let you know how everything works when I get it. One question, in the video, when you reassemble your gun, you coat the outside of it with something that looks like grease before you put the stock back on. What is it and why??? Thanks again.
Thanks for your kind words.
It’s silicon grease so it stays protected.
No rust here.
Gracias Luis!!!
Great video, thanks. The assembly looks simple and quick... Did you grease the components first and what is the "grease" you used on the barrel before mounting it in the stock?
Thanks,
Its silicon grease to prevent it form oxidising...
@@FieldTargetMASTER Thanks!
Luis, you are missing a bearing off the piston nose on the 22mm piston. Hit me up for some spares.
Thanks mate.
Yet it still works fine.
:)
A mí la tx me parece tan bonita por dentro como por fuera
Hermosa rifle muvi di
Thank you for sharing!
Luis I just noticed your piston back end their is a ring missing 😉👍
Yes it Was! Thanks.
Check this other video:
th-cam.com/video/MzoIAzu44lE/w-d-xo.html
Olá Luis, boa tarde. Podes indicar-me um site, onde compraste o kit para TX 200 (Tony Leach)? agradeço desde já.Cumprimentos...Fernando Franco
Olá Fernando, foi sempre via messenger. o contacto é Tony airguntech. bastante responsivo.
@@FieldTargetMASTER Obrigado caríssimo Luís! saúde e vida longa!
En tu video de posición de parado, se nota que acercas la cara para alcanzar mira, tu cabeza se ve inclinada, si le poner una cantonera ajustable ROWAN, podrías lograr una mejor postura de cabeza y cuello ( más natural) sin necesidad de modificar la culata de fábrica, por otro lado está el tema del Hamster ( que no sé si sea limitante en tu categoría) Rowan tiene un modelo que no implica perforara culata original...Saludos
Luis great video - the TX 200 shoots to the right - I believe this is caused because the piston is free to rotate in the tube hence the springs twisting movement propelling it clock-wise / so it needs some kind of brake to prevent it happening or may be a stronger spring to act like a buffer-brake to put a stop to the piston rotating so much. First stage of the trigger may only need 2mm or 3mm of adjustment to cut down its travel. And also using a heavier scope will also cut down recoil. Hope this is of real help Cheers 👍
Thanks.
That's an advanced course on physics.
Just by repositioning the finger and proper control on release it was ok.
Maybe with more time I can se further...
Keep safe.
Consulta Coach: sobre los KITS DE TUNING ( Vortek, Macari, TBT) cuál has usado, cuál recomiendas, sé que usas TX-200 y que muchos que tiran con riflE de de resorte prefieren TX-200 o Weinrauc 77,97...pero yo tengo un Diana 54 de 1998...( sigue vigente en catálogo Diana 2020) en México no hay Distribuidor de Diana, así que he tenido que buscar y buscar en EBAY...
No hay ni en inglés, ni en español un video que hable sobre cómo elegir un AA-TX-200 para Field Target 1) MK3 2) HC 3) PRO SPORT, si mides X estatura ( largo de antebrazo, altura de cuello), tomando en cuenta que FT es un deporte de presición, sabemos que la ergonomía y la balística son temas fundamentales para lograr eficiencia en armonía tirador/equipo. Por ejemplo:
¿Qué culata se adapta mejor para tiradores de estatura baj, media, alta?
¿Las tres culatas : MK3, HC, PROSPORT, reciben bien accesorios Rowan para lograr mejor acomodo de encare ( cantonera ajustable, hamster)?
Puede ser un tema de interés de AA para asesoría de sus clientes, puede ser un tema de reflexión entre tiradores( aunque los ajustes del equipo sean personales y secretos competitivos)...
SALUDOS DESDE MÉXICO
Por favor.
Onde arranjou kit do tony em Portugal? Tentei falar com ele mas não me garantia a entrega fora do Inglaterra.
Muito obrigado
Ola Bruno!
Não tem revendedor. É mesmo fale com ele, encomendar, pagar e esperar. Depois ainda pára na alfândega para mais iva e taxas…
De outra forma só um kit usado ou se tiver alguém que venha de férias que lhe possa trazer…
Hola Luis
se nota mucho la diferencia con el kit de Vortek
Un saludo
Pues el vortek no lo probé nunca...
Awesome video my friend. I been wanting to buy the TX200 or theHW97K can you tell me which gun is better in your opinion please.
Hi. Both very good airguns. I chose TX over HW 97 because TX is MUCH EASYER to do maintenance; it has lots of after market kits and it is prettierthan hw.
Easy.
@@FieldTargetMASTER thank you very much you made my mind up. I want the hunter carbine one.
Hi, thank you very much for this useful video, I also have a TX 200 HC from field target, please tell me where I can order the Tony Leach Kit ? Thank you
Hi Elena.
Tony is on fb... look for Tony Airguntech.
Send him my regards...
;)
@@FieldTargetMASTER Thank you very much
LUIS with the 22mm kit fitted is the power of the rifle reduce / is the kit just set for 45yard range shooting Cheers
Still strong at 50m.
If i do my part she wont let me down.
:)
Felicitaciones por el video, por el rifle, por las mejoras.
Yo para resorteros prefiero una culata pesada de multilaminado de Gary Cane. Con un gancho que agarro solo por debajo...
LUIS who about adjustable pad for the stock
I'll install one with a new stock...
After putting in Tony Leach internal, how big is your speed deviation with weighted pellets?
In my tx it's under 1m/s.
:)
Sou "leigo" na matéria Luís não consigo dar opinião mas estou a aprender com os teus vídeos....
Well I would recommend ZRS stock. I have one on my TX and here is a video of one other guy shooting with one th-cam.com/video/obtui9nRP8U/w-d-xo.html
www.garycanesgunstocks.com/f-t-stocks.html
Esta seria a minha escolha para a coronha.