On your 100watt Reci laser tube, does it say something like "peak 120" and "agreed 100"? I'm just trying to figure out if they quote the laser wattage by the peak or the continuous rating.
Hi great video. i have an isue. i have now waterflow, and my laser can't fire. do you now how to change it? i have the same laser setup as you have. /Torben from Denmark
Hey Drew. First of all you are amazing for making this video. I’m looking at this exact same model and watts. I got a quote for around $4100 for everything. Is there anything you recommend I put on it or replace? I’m going to use this in a subdivision so curious how loud and Smokey it is.
I am montreal, Canada 🇨🇦, I interested in 1610n what's the process, please advise me,they told shipping charges 2000 usd. This machine allowed (govt)in my garage or backyard Cubano.
Hello! Hope you doing well! I am. Hoping you see this message! I am. About to buy this machine and want to hear from you after two years that you own if you still recommend it! Thank you
About an hour ago I communicated with the Gweike on a quote for the LC 1390. I’m new to this so I was wondering if you could list the upgrades/specs you DEFINITELY should add to this & maybe any you think would be great but maybe not detrimental. For example I hear the RuiDa controller is s must...a Reci tube is a must...etc. Thanks!
Drew Martel Do you like the Chuck Rotary? Did you pay for ever added item? A lot of lasers come with the honeycomb but they are saying it costs $60 for the honeycomb. How’s the after-purchase customer service...& technical help customer service? I’m still researching which to get BUT if I do chose this unit I think I’ll have to start a Weike Laser Cutting Group on FB, lol. Would be great for owners of these to have a group. Thanks Drew!
Awesome! I got exactly the same machine from G Weike direct. Did you notice the AC plugs in the back that are lableled 'blower'? I'm afraid of plugging in the blower directly into the laser and blowing a fuse but I think it may be for auto assist so it turns on automatically during a job. Do you have both the blower and air assist connected to your wireless switches?
Did you have to communicate through whatsapp to get a quote? On alibaba the have the base quote from 2000-4000, does it cost around 3000 to get it shipped? Thanks for the good review. I have been looking for a review on G.Weike.
So I primarily communicated VIA email. I went to their site first, negotiated what I wanted built and then paid for it through Alibaba. Shipping is going to vary depending on where you're at I suppose, but I'd assume 3k for shipping.... that's delivery to your house too. Good luck!
Hi Drew: I recently acquired this machine from China . LC1390N. As you have mentioned the manual sucks. However, I did put it all together. But still have not been able to make it all work. Is there a way I can send you an email with my questions or get in touch with you ? Don’t want to sound disrespectful but I would not mind compensating for your time. Thank you .
Hello Sunil,I'm Dana and I just browsed this customer's review,if you have any questions, please feel free to ask me in the email,we have complete files and 24/7 technicians to help you to use the machine,it is also totally free， don't worry about this😄
Hey budd , thanks for the video , can you give me the name of the salesman or who can i contact, because i contacted one guy from your comments he said he is from Gwieki but the pictures he sent of the machine looks nothing like this or the boss machines like u said ,thanks appreciated
Great video. I'm looking at this right now.
I just bought one. I will share my reviews once fully setup.
On your 100watt Reci laser tube, does it say something like "peak 120" and "agreed 100"? I'm just trying to figure out if they quote the laser wattage by the peak or the continuous rating.
Did you have G-Weike add the camera or did you buy the camera separate with Light Burn ?
Can you tell us what company you worked with. Been trying to get one but say they wont sell to US
Hi Drew. I assume your machine is in the garage. How do you deal with Winter and can you also show your exhaust? Thank you.
Hello Drew, I recently purchased this used and disassembled equipment, would you have a manual? Thank you.
Hola amigo puede explicar por favor como instalaste la cámara y que uso le das
Could you post a link to where you bought it. I actually wanna buy it from the same person
What is the focal length with the work table, I have the same machine
How did you do the name for your laser?
Also...how is their post-purchase customer service?
Hi great video. i have an isue. i have now waterflow, and my laser can't fire. do you now how to change it? i have the same laser setup as you have. /Torben from Denmark
I’m looking at purchasing a 60 watt laser trying to find information on this brand
Hey Drew. First of all you are amazing for making this video. I’m looking at this exact same model and watts. I got a quote for around $4100 for everything. Is there anything you recommend I put on it or replace?
I’m going to use this in a subdivision so curious how loud and Smokey it is.
Definitely get a reci tube air assist and z-bed. I also recommend the laser guide.
I am montreal, Canada 🇨🇦, I interested in 1610n what's the process, please advise me,they told shipping charges 2000 usd. This machine allowed (govt)in my garage or backyard Cubano.
Hello! Hope you doing well! I am. Hoping you see this message! I am. About to buy this machine and want to hear from you after two years that you own if you still recommend it! Thank you
About an hour ago I communicated with the Gweike on a quote for the LC 1390. I’m new to this so I was wondering if you could list the upgrades/specs you DEFINITELY should add to this & maybe any you think would be great but maybe not detrimental.
For example I hear the RuiDa controller is s must...a Reci tube is a must...etc.
Thanks!
Air assist, z-table, auto adjust pen are a must. Nice to haves are the laser guide and wifi. Definitely go with a reci tube.
Drew Martel Do you like the Chuck Rotary? Did you pay for ever added item? A lot of lasers come with the honeycomb but they are saying it costs $60 for the honeycomb.
How’s the after-purchase customer service...& technical help customer service?
I’m still researching which to get BUT if I do chose this unit I think I’ll have to start a Weike Laser Cutting Group on FB, lol. Would be great for owners of these to have a group.
Thanks Drew!
Drew Martel also you said yours came with the CW5000 chiller or did you pay for it. They are saying it’s $300.
Thanks
Awesome! I got exactly the same machine from G Weike direct. Did you notice the AC plugs in the back that are lableled 'blower'? I'm afraid of plugging in the blower directly into the laser and blowing a fuse but I think it may be for auto assist so it turns on automatically during a job. Do you have both the blower and air assist connected to your wireless switches?
You will 100% blow the fuse if you plug the "blower" into the back of the machine. Ask me how I know 😂
Denzil Makes haha thanks for the heads up. You are braver than I. Any idea on what those are actually for? Air assist maybe?
How much did you paid?
could you provide a link true aliexpress if thats possible ? tia
thats a HUGE bed for a laser cutter. what a monster.
Haha. Yes! But for the price of ordering from overseas, the increase in cost was not bad compared to here in the US.
@@drewmartel1583 hi
Did you have to communicate through whatsapp to get a quote? On alibaba the have the base quote from 2000-4000, does it cost around 3000 to get it shipped? Thanks for the good review. I have been looking for a review on G.Weike.
So I primarily communicated VIA email. I went to their site first, negotiated what I wanted built and then paid for it through Alibaba. Shipping is going to vary depending on where you're at I suppose, but I'd assume 3k for shipping.... that's delivery to your house too. Good luck!
Does it come with up and down table?
Yes it has a z-table. When you purchase this they'll configure it to your specifications.
Hi Drew:
I recently acquired this machine from China . LC1390N. As you have mentioned the manual sucks. However, I did put it all together. But still have not been able to make it all work. Is there a way I can send you an email with my questions or get in touch with you ? Don’t want to sound disrespectful but I would not mind compensating for your time. Thank you .
Hello Sunil,I'm Dana and I just browsed this customer's review,if you have any questions, please feel free to ask me in the email,we have complete files and 24/7 technicians to help you to use the machine,it is also totally free， don't worry about this😄
what is the mesurtment without legs do you think it fits though regular door opening?
Will it cut steel? And how much $ usa?
no,it can't cut steel,if want to cut steel, better use a fiber laser cutter.$ depends on the laser power
i it hard to engrave photos with a 100W?
You can do it with a 100 watt depending on the material.
@@drewmartel1583 I have engraved marble,granite,wood,slate,and glass with my little k40. I hope to get better results with an 80W or 100w laser.
@@drewmartel1583 Does it come with a cooler and rotary?
You payed 1730 usd?
Hey budd , thanks for the video , can you give me the name of the salesman or who can i contact, because i contacted one guy from your comments he said he is from Gwieki but the pictures he sent of the machine looks nothing like this or the boss machines like u said ,thanks appreciated
I contacted G.Weike directly. You can also find them on alibaba. As far as I know they haven't changed the model at all.
Maybe because it was the 6090 size i was looking at ?? I don't but thanks anyways
How to find a Brocker?
visit www.gweikecnc.com/，and click chat with us:)
I see where Boss got their idea and design from lol
This is the manufacturer for Boss machines.
@@drewmartel1583 wow. They just upcharge the Boss machines.
Pleas send us the factory address
100 watts you over paid