Good video. Explaining about hubcentric size and even about checking on the hubs and wheels is great for those unaware of the potential issues of them not sitting nicely. Great job.
@@JDCarsChannel Was mostly things I already knew to be fair but had I not known them i think I would've had a great understanding after your video. Well done
Good presentation, straight-forward, clear and good visuals. I wish you had waited until the rain stopped though, I got focused on how cold and wet it was! I want to do this with both of my vehicles, 2006 Z4 Roadster and 2009 328xi sport wagon. Both have the stock wheels which for both are pretty wide in themselves. You're correct, the wheels need to be brought out just to provide that more aggressive stance. I'll be checking back to take notes for my spacer fit a bit later.
did you have any rubbing issues? My son has a 07 335i and he wants to put spacers on. I measured and I can run 15 front and 25 rear. I have read on some forums that some people have rubbing issues. Our car is not lowered.
I recommend applying anti seize paste on the surface of the new spacer that touches the wheel hub, this is to prevent the new spacers seizing onto the hub at a later date ☹️
I need help i need to measure for wheel spacer because im changing the rins on my BMW with a different set of bmw rims the issue is the rims rub on my brake calipers and sit to far in how doni figure out how far need to bring them out to sit where the old rims would sit.
I have a 2007 328xi I was going to get 15mm for front and 20mm for the back but would you suggest I do 25mm in the back instead my car isn’t lowered or anything.
hi, ive just put some 18 inch mv1 staggered bmw alloys on my 2007 320d m sport, with 235/40/18 tires front and 245/40/18 rear , the alloys are 8 inch front and 8.5 rear. offset is 47 front and 50mm rear, can you advise me if 20mm will be ok , i will be going back to the 225 and 255 tires in time so dont want to use too bigger spacers, my old OE alloys offset were 34 and 37 , can you help , cheers colin
Hey dude been thinking about running the same 20mm on my rear and 15mm on my fronts. Any issues with the tires rubbing fenders bro? Or should I go with 15mm on rear and 12mm on fronts
Quick question. Does winter tires make lot of noise compare to regular tire? I have installed snow tires on my 17" and have been experiencing lot of noise as well as vibration when braking. Have you ever experienced such? Thanks
A tad noisy but if your cars not stock quiet you won't notice. You WILL notice a much softer ride with no stud winter tires. Balance and tight suspension play the biggest part. I have Altimax Arctic 12 for snow and love them. 18's with off sets year round. 08 335xi
Hey! I would have ordered the wheels in the right offset if I was already investing money in a new set! At least consider switching to a stud and nut conversion to improve clamping force and safety! I explain it in my very first video.
Hello, I just installed the Eonon GA7165 and there is absolutely no audio. Im wondering if theres a solution. It could be my battery (pretty much dead and charging it now) but everything else works fine besides the audio. Any thoughts would be much appreciated. Thanks.
Torque spec? I’ve been reading many say 88, 90, 100, 103, 120 nm. I’d think 90 is “safe”? I’ve got an e90 2010. Can’t find a torque spec sheet online that’s specific to all torque figures and the manual doesn’t provide this. Thanks!
I got my rims from car ID, but the Amazon link in the description is faster shipping for the same price. I've been in the same process of blacking out my car too, check out some of my other videos.
hey bro thats a nice out i like it, im trying to do mine like that aswell. may i ask what size your wheel and tires are? so that i can compare mine and possibly know what to purchase? thanks
What model is your BMW? I have an 06 330i and it looks almost identical to your car but my wheels came wider and my wheel gap from the fender is the lowest I've ever seen for stock so these sizes wouldn't work for me...
will dawson what wheels? What car? I have a pre-LCI 335xi sedan, it has tonnes of room with stock type 159. I’ll use a 20mm with room to spare. Wheels aren’t that posh it just looks silly without spacers and I’m sick of looking at it lol.
@@alloutofdonuts3998 yes it looks kinda eh with the wheels sunk in i agree. I have an 08 328xi. Id like them to be pushed out enough to be flush if possible.
Hey can anyone tell me if its better to get spacers or a wider tire to get a offset? i dont know how safe spacers are so someone with experience let me know please!!
I had my wheel spaces custom made at my dads factory. I have a full widebody on mine and the spacers I Have are insane 😳. Not good thoe lol there like 3inches I think 😅
I don't want to be pedantic but it looks a bit odd seeing M-sport colours on a non M-sport (SE) car. But great video. I'm looking to get some spacers on my E90 335d very soon so this video was good to watch.
Anyone else have a hard time finding the correct sized center caps?! I’ve ordered 2 different sizes and they are not correct. I’ve measured the bore on my wheels but the sellers are not measuring the center caps in the same place!
THERE'S A GUY ON TH-cam EXPLAINING IN GREAT DETAIL THE PROBLEMS WITH WHEEL SPACERS AND THE NEGATIVE EFFECTS ON SUSPENSION ,BRAKING ,TIRE WEAR,SAFETY ETC SO I'M CONFUSED .
Good video. Explaining about hubcentric size and even about checking on the hubs and wheels is great for those unaware of the potential issues of them not sitting nicely. Great job.
Glad it was helpful! Thanks for watching!
@@JDCarsChannel Was mostly things I already knew to be fair but had I not known them i think I would've had a great understanding after your video. Well done
You're actually the only e90 channel that i follow and enjoy haha! Keep up the good stuff
Hahaha thanks man!
Matt Brand dam😞
hahaha my bad dude, ill check out your channel now and sub, you've got a month to keep me interested :D!
Matt Brand 😂
fr lmfao
Got to love a black E90.
Some real bargains out there
Just bought my second black E90👍
Adding spacers also gets rid of a rainy day!
Good presentation, straight-forward, clear and good visuals. I wish you had waited until the rain stopped though, I got focused on how cold and wet it was! I want to do this with both of my vehicles, 2006 Z4 Roadster and 2009 328xi sport wagon. Both have the stock wheels which for both are pretty wide in themselves. You're correct, the wheels need to be brought out just to provide that more aggressive stance. I'll be checking back to take notes for my spacer fit a bit later.
Thanks! I'm glad you enjoyed the video! I agree, even the smallest difference in spacing greatly improves the appearance!
Thanks for reminding us to check for no wobble.
Good vid.
Glad to help!
did you have any rubbing issues? My son has a 07 335i and he wants to put spacers on. I measured and I can run 15 front and 25 rear. I have read on some forums that some people have rubbing issues. Our car is not lowered.
If I get 25mm for front and back would tht be okay
Good video! Clear audio and very helpful 🖒
Thanks man!
Awesome video! This gives me more of a glimpse of what I should do for my next mod on my BMW!
Thanks!
Love my wheel spacers 🙌🏻👍🏻
They make a huge difference!
JD Cars indeed! Best mod I did 4 years ago 👍🏻
do the spacers add any sort of vibration too the car?
Only a very very slight vibration at high speeds...nothing crazy
Should I do the same 25mm as u did to urs
I have the e90 328i 2007
I recommend applying anti seize paste on the surface of the new spacer that touches the wheel hub, this is to prevent the new spacers seizing onto the hub at a later date ☹️
Bro 108 pcd alloy can fix with spensor in90?
Bro,any advise? I got the same model. 255/40/18 rear,225/40/18 front.
I need help i need to measure for wheel spacer because im changing the rins on my BMW with a different set of bmw rims the issue is the rims rub on my brake calipers and sit to far in how doni figure out how far need to bring them out to sit where the old rims would sit.
Bro 108 pcd alloy can fix with spensor in90?
I have a 2007 328xi I was going to get 15mm for front and 20mm for the back but would you suggest I do 25mm in the back instead my car isn’t lowered or anything.
i bought 20mm for rear in my 2006 320d and its not enough, go with 25 mm at least
Depends on your wheels, but I found 25mm worked best for me
hi, ive just put some 18 inch mv1 staggered bmw alloys on my 2007 320d m sport, with 235/40/18 tires front and 245/40/18 rear , the alloys are 8 inch front and 8.5 rear. offset is 47 front and 50mm rear, can you advise me if 20mm will be ok , i will be going back to the 225 and 255 tires in time so dont want to use too bigger spacers, my old OE alloys offset were 34 and 37 , can you help , cheers colin
Great content. Keep it up!
I have a e90 325i and I was wondering if the same spacers would fit
Yes
I ordered some wheel spacers for my 335i the other day 20m for the back 15m for the front.
Sweet!
Hey dude been thinking about running the same 20mm on my rear and 15mm on my fronts. Any issues with the tires rubbing fenders bro? Or should I go with 15mm on rear and 12mm on fronts
Hey Bro, these spacers are universal and what size is it, how many centimeters thick is it?
Quick question. Does winter tires make lot of noise compare to regular tire? I have installed snow tires on my 17" and have been experiencing lot of noise as well as vibration when braking. Have you ever experienced such? Thanks
Yes. Winter tires typically make more road noise
A tad noisy but if your cars not stock quiet you won't notice. You WILL notice a much softer ride with no stud winter tires. Balance and tight suspension play the biggest part. I have Altimax Arctic 12 for snow and love them. 18's with off sets year round. 08 335xi
Hey! I would have ordered the wheels in the right offset if I was already investing money in a new set! At least consider switching to a stud and nut conversion to improve clamping force and safety! I explain it in my very first video.
Hello, I just installed the Eonon GA7165 and there is absolutely no audio. Im wondering if theres a solution. It could be my battery (pretty much dead and charging it now) but everything else works fine besides the audio. Any thoughts would be much appreciated. Thanks.
That's really strange...what audio source are you using?
Does your car Vibrate or starts shaking at high speed with those spacer’s?
I never experienced any bad vibrations with these spacers 👌
Can you tell me if you had to roll the fenders? Or if you have a problem hitting potholes?
I did not have to roll the fenders... no problems so far
Do you have to do rear and front as well
What size are your rear tires? My tires are staggered and i have 255s in the back.
I think they are 225
I thought same thing. This has to be a 328
Yeah I watched again it's not a 335
What was your rims spec? Mine is 19x9.5 et35 all around.. not sure about spacers should I go with 15 and 25?
dude you have a video on those lights you have on your car i want to do something similar to mine
I do have a video on them, but they're discontinued.
@@JDCarsChannel thx tho i subbed I literally watched your channel the whole day yesterday and still on today lol
how many mm did you put on front and rear?
Clean Beemer bro 👌🏼👌🏼
Much appreciated brotha!
@@JDCarsChannel yes sir thank you for your vidz 👌🏼
Nice video! Whats the size of your rims?
Torque spec? I’ve been reading many say 88, 90, 100, 103, 120 nm. I’d think 90 is “safe”? I’ve got an e90 2010. Can’t find a torque spec sheet online that’s specific to all torque figures and the manual doesn’t provide this. Thanks!
I torque my wheels to 107 ft. lbs.
89 per manaul
What size are your wheels & rims bro?
How r the spacers and lug nuts holding up did u have any issues
I did not have any issues
How wide the rims?
if we put the spacing geometry should be done on wheels?
I have a bmw e90 330i and 19 inch wheel m4 grand coupe réplica and I want to khow what size I can install for rear I think 25 mm is to much
I have 9.5 rear and 8.5 front wheel I think is the offset
Hmmm...I would try 15mm or 20mm
15mm for sure, I have the same offset just 18” rims on my 2006 330i, I have 15mm all around and it looks amazing
wich size of ET ( ofset ) of rims are ?
ET35 offset
Torque spec ,? For front wheels
90 ft lbs
you think a 2013 3 series xdrive sedan would look good with 2" spacers??
Front or rear?
back 2", front 1"
Oh yeah!
Thanks!! Love the vids by the way 👍👌
looks good.where did you get your rims..... Just got my BMW and i need to get it all black. if you have any tips please share thx
I got my rims from car ID, but the Amazon link in the description is faster shipping for the same price. I've been in the same process of blacking out my car too, check out some of my other videos.
Are those the alzor style 030’s? If so did you get the 18x8’s or the 18x9’s?
These are Avant Garde M310's
hey bro thats a nice out i like it, im trying to do mine like that aswell. may i ask what size your wheel and tires are? so that i can compare mine and possibly know what to purchase? thanks
what size of wheels 8or9 inches
What model is your BMW? I have an 06 330i and it looks almost identical to your car but my wheels came wider and my wheel gap from the fender is the lowest I've ever seen for stock so these sizes wouldn't work for me...
I have an 07 328i
What is the name of your Rim?
Great video
Thanks!
anyone do this on stock rims? just curious as to what size id need if so.
will dawson what wheels? What car? I have a pre-LCI 335xi sedan, it has tonnes of room with stock type 159. I’ll use a 20mm with room to spare. Wheels aren’t that posh it just looks silly without spacers and I’m sick of looking at it lol.
@@alloutofdonuts3998 yes it looks kinda eh with the wheels sunk in i agree. I have an 08 328xi. Id like them to be pushed out enough to be flush if possible.
will dawson is that sedan or coupe? I’ve heard the coupe has less room on the rear. What wheels?
Hey can anyone tell me if its better to get spacers or a wider tire to get a offset? i dont know how safe spacers are so someone with experience let me know please!!
Wheel with wider offset is always better, but I did not have that option.
thanks homie
I had my wheel spaces custom made at my dads factory. I have a full widebody on mine and the spacers I Have are insane 😳. Not good thoe lol there like 3inches I think 😅
My rear I have 18x8 with a +40 offset. I have to use a 1.75 spacer to make it flush. So technically it's a 40-45mm
What is the size of your wheels/Rims?
I have a 325i 2006 and my tires are 205/55/R16.
225/40 R-18
JD Cars I have the same width tire. What is your rim width front n back?
Is it recommended to use the measurements you used here or have you lowered your car in the past. Thanks
This video was prior to my lowering the car
Trying to buy M3 rims for my 328i, 265 in the rears and 245 in the front, but if I can I'll try to go wider.
That would be sweet!
I don't want to be pedantic but it looks a bit odd seeing M-sport colours on a non M-sport (SE) car.
But great video. I'm looking to get some spacers on my E90 335d very soon so this video was good to watch.
Hahaha yeah I know...but I like them.
AngloSaxonVanguard lol I think the same thing when I see those.Also I love the 335d!
Is the torque on the lugs the same??
Yes
What type lights are km the front?
Those are old discontinued Spec-D headlights
Love the videos
Thanks bro
So now your total offset in the back is 10?
Correct
Work on bmw 320i e92 year 2008?
Yup
Yup
tkx
Work on Bmw 750li 2006 model
How was it driving on these? Are you sensing any vibrations? Especially on high speeds?
Drives smooth... no big vibrations!
Nice headlights!! Where did you bought them from? Thanks
Thanks! Those are my old lights which I purchased on eBay, but they have been discontinued.
Do you want to make a m3 look or maybe a video "how to install m3 look exhaust"?
I would like dual exhaust...but it would cost about $500 which isn't worth it to me.
Great job👍🏾👍🏾
Thanks man
Hey JD! excelentes tus videos
Gracias!
Why did you buy two different spacers?
Because the front and rear required different sizes.
Is it the wheel size? I want to buy some for some stock wheels I have but I’m not sure
JD Cars thanks for the reply btw
Yes the wheel offset.
how stable are the spacers on the car, do you feel much difference, especially when spirited driving
The difference is minimal but noticeable...it feels a bit more stable. Also they are very smooth - no vibration.
What size rims you got ??
18s
looks a bit awkward as the tires are not wide enough lol maybe its just me
E55 BæMG I agree
It's not bad in person...but yes I would've liked to get wider wheels and tires.
E55 BæMG yupp
how wide are your tires? bc i have 255 on my beamer and i reckon it looks good
@@erikchavarria9081 years apart in the comments but I have 265 with stretch and it looks really good.
I bought ksp 15mm spacers and they don't fit the lugs are way off false advertising
I was considering buying a set of KSP
@@bartb6804 actually they do fit im just a noob.😂 my n54 looks sick now
i have yet to do so....
What is you rims offset?
I believe they are 35 offset
When are your going to put the BMW logo on the rims of your car
Soon...don't worry!
Anyone else have a hard time finding the correct sized center caps?! I’ve ordered 2 different sizes and they are not correct. I’ve measured the bore on my wheels but the sellers are not measuring the center caps in the same place!
Rim size?18/19?
18
Nice setup, do you know if these would fit a 2004 bmw 525d e60??
I'm not entirely sure. You'd need to check the hub size and bolt pattern.
Quality video :=)
Thanks!
Marian hill intro rocks
thanks bro
Where in Massachusetts are you from? I'm from Milford
North of Boston
What's the last soundtrack called Jd
By the way big fan of yours bro
Ship Wrek & Zookeepers... Thanks bro!
JD Cars
Name song intro?
Down - Marian Hill
JD Cars Witch remix ?
No need to sand or wire brush before spacers go on?
Not required, but a good idea.
What are the size of the tires in this video?
225/40-ZR18
Awesome!
Thanks!
Still happy with the spacers?
Yeah! Love them
JD Cars cool!! Thnx for the fast reply!!
Thanks
You're welcome!
GJ brother
🤟
what are your wheel size?
18inch
🔥🔥🔥
No a mean the width of the wheel
8 inches
Rear or front
Both
one of my friends went to space with those spacers..
what do you mean? what happened?
@@moizali1752 a car accident happened. he did something wrong while installing them, i don't know...
Before installing wheel spacers, first what to need to do is drop the car.
I mean it’s either or lmao can just put coilovers after takin them off
Tires are not wide enough looks weird.
You deffinitly have to lower your car or get bigger wheels!
It's driving me nuts that the car was still wet. Water spot make me angry.
Me gusta
Haha gracias
Hot!
Thanks bro
THERE'S A GUY ON TH-cam EXPLAINING IN GREAT DETAIL THE PROBLEMS WITH WHEEL SPACERS AND THE NEGATIVE EFFECTS ON SUSPENSION ,BRAKING ,TIRE WEAR,SAFETY ETC SO I'M CONFUSED .
Take Out the music