Hard grease packed in the hole, a semi snug shaft & a hammer will work pretty efficiently. Works great on pilot shaft bushings too as long as there’s no hole behind what ever your working on the hydraulic pressure gets it done.
A brilliant plan! Being a very practical and mechanical minded person, I can totally say "brilliant". Use larger rollbolts for larger bearings! Gonna make myself a set a.s.a.p! Thanks a million!
The Bolt is called a CONCRETE ANCHOR WAGE. I used a grinder to cut a slit so I can use a screwdriver to hold it while it tightened around the bearing. No welding needed
I just made an adapter for the threaded end and attached a simple slide hammer worked fine. However for really stuck bearings may have problems with my method?
That's an excellent idea. Well done. Might be better if you got someone else to weld stuff for you though, or work on improving your own welding skills so there are no accidents/injuries. Really good tool though.
Este video equivale al 1% de todos los vídeos de youtube donde 99% son sólo entretenimiento y 1% que realmente te deja 100% satisfecho. Practico Sencillo y ÚTIL MUY ÚTIL.
A lot of work for a one-purpose tool. It isn't adjustable so it only work for a limited range of bearings. I'd rather just buy an adjustable tool that works for several sizes, but TH-cam loves to recommend these homegrown DIYers.
A hammer, a bolt bin, and a loaf of bread will allow you to push out any blind hole bearing of practically any size without all the welding and fixture making for one size of bearing. I've been in industrial maintenance and service work for over 35 years, and I typically look for the easiest and best way to do a job - not the most complicated one.
Been searching for diy bearing puller. So far this is the best
Hard grease packed in the hole, a semi snug shaft & a hammer will work pretty efficiently. Works great on pilot shaft bushings too as long as there’s no hole behind what ever your working on the hydraulic pressure gets it done.
A brilliant plan! Being a very practical and mechanical minded person, I can totally say "brilliant". Use larger rollbolts for larger bearings! Gonna make myself a set a.s.a.p! Thanks a million!
Very simple, but only you hade the idea! Congratulachion and thank you!
Очень классно!!! Спасибо Большое Вам за идею!!!😊👍
thank alot Ur teaching to me❤❤❤
Wow simply amazing, you are very creative
What's the part called that actually sets into the bearing?
The Bolt is called a CONCRETE ANCHOR WAGE.
I used a grinder to cut a slit so I can use a screwdriver to hold it while it tightened around the bearing. No welding needed
Brilliant idea veru useful tool you made....by this we can efficiently pull the bearings...
Great idea! Good job man 👍
Is the music by makoto? Great tool idea!!
I just made an adapter for the threaded end and attached a simple slide hammer worked fine. However for really stuck bearings may have problems with my method?
Behot dhanyavad bhaisaab! Excellent idea!
Good idea !
👍👍👍👍👍👍👍
brilliant idea , love your channel
Very nice information video bro
Excellent combination of idea & skill thanks for uploading this video
Water pump impeller bearing. i have done this with a ratchet, nut bolt, pipe and a adjustable wrench
I like this one. But what if you need to pull a bigger bearing? Make another tool?
molto bravo. Congraciulation.
What is that first piece with "M10 ILTOP" that gets inserted into the bearing? Where to get one of those (in my case 12mm bearing hole)?
That's an excellent idea. Well done. Might be better if you got someone else to weld stuff for you though, or work on improving your own welding skills so there are no accidents/injuries. Really good tool though.
Very good idea and use of a concrete ancore I will make one
वाह भाई वाह क्या आईटम बनाया है
Nice idea. Super.
Ottimo.. Bravo
I like the wrench
Brilliant idea.
superb idea hatsoff to you mr.
You are a smart man! A real diy genius.
Hi, respect for your ideas a work, the arc striking is incredible. Which welder and type of electrode you use? Thank you
Yes, but I would make the side wings adjustable for different sized bearings.
Excelente,buscaba algo asi
At last a brilliant home made tool well done
BRILLANTE MUY BUEN VIDEO GRACIAS Mr.
Yeah its cheaper to buy a proper bearing puller than a welding machine.
can you do it without the welding?
Super junius👍🤝🤝🤝🇮🇩
The tool is very good but the back ground music is irritating
That's a great idea, now I can make me a bearing puller. Thx you .
Este video equivale al 1% de todos los vídeos de youtube donde 99% son sólo entretenimiento y 1% que realmente te deja 100% satisfecho.
Practico
Sencillo y
ÚTIL MUY ÚTIL.
Best simple and effective idea To remove bearings!!!!!!!!! I’m building one thank you for sharing.!!!
Awesome tool 👍
That works pretty good for that size bearing. But it doesn't look universal for larger bearings. JMHO
Very 💕👍👏 sir ji
that's a really great idea! great vedeo mate is very good for use in some hard places!! cheers from Norway
Excellent tool!
Interesting. Welding skills could be improved.
Excelente bien 👍
Kya khoob banaya hai, jabardast
C est une tres bonne idee bravo
Exeleent video, I am going to make one, never thought of using that for the center good for blind bearing caps
Подарите человеку инструмент! Он так мучается!!!
Great idea
1 great idea
2 some bearings need more strenght to be extract but I like the idea
3 really learn how to weld !!!!!
A lot of work for a one-purpose tool. It isn't adjustable so it only work for a limited range of bearings. I'd rather just buy an adjustable tool that works for several sizes, but TH-cam loves to recommend these homegrown DIYers.
¡WONDERFULL!!!.THANK YOU.FROM CUBA
Great bro
A hammer, a bolt bin, and a loaf of bread will allow you to push out any blind hole bearing of practically any size without all the welding and fixture making for one size of bearing.
I've been in industrial maintenance and service work for over 35 years, and I typically look for the easiest and best way to do a job - not the most complicated one.
Only one size of bearing can be remove due to restriction of adaptor.
Ide yg keren, berarti harus nyiapin byk tuh
Excelente idea amigo Deswal saludes desde Canada/From Canada Hello Mr Deswal, excellent Idea
Bravo Turkey İzmir den selâm
Brilliant videos !. Subbed 👍
Wow.brilliant idea.
Wow super
Super
ரொம்ப அருமையான ஐடியா.நன்றி சகோ.
Nice but there is a chance the outer race may stay lodged in and the inner comes out.
Very nice
VERY good 👌👍
Good ideia! Congratular íons!
brilliant!!!
Very clever!!!!!!!
Good....
Prosty i skuteczny ściągacz😀
Muy buena herramienta que materiales ocupare amigo
Excellent idea
very nice i like
Great idea with an anchor bolt!
Very good
Thanks very useful tool.
good my boss
Nice music 😂
Good
very smart idea
Good job
गुड
Nice
Very very nice
Very good, genius
Good Idea GURU, Thanks You So Much, Most Help full video
COOL...THANKS !
Vídeos interessantes,bem instrutivo.
Porém seria melhor se não mostrasse o Flash da SOLDA!
Good ideia 👍🇰🇿
Not much of a welder but good idea except won't work on bigger bearings.
Please make a video showing how to make a homemade MIG welder.
Top você é o cara ótimo projeto
Nice 🔥