Nice, I ordered just the adjustable sheave, for my 139qmb, from NCY , it says for DIO, I guess they are a lot that are the same, I can't really tell a difference, but I got no paperwork with the sheave, not even a box, it was covered in dust, could it be a knock off? It says NCY, you never know these days! I have done about everything possible to get more power from the qmb, it's bored to 81cc, ported head, intake, and matched, a decent exhaust, I'm starting to think maybe the previous owner added gears, but I live where there is alot of hills, and weigh 3x what he does, I have to spin 10k to get 55mph, but I'd be happier to be able to maintain a cruise speed around 40-45! Over a peak speed, on flats or slightly downhill, with nothing up hill, I think my enginrvmay be down on power fue to a slightly low compression, but my gauge may be wrong, 155psi, I figured it should be closer to 170, I'd like to get it to about 200-205 psi, and run around a 100 octane fuel, maybe a water methanol injection for the steap hills, to prevent spark knok, detonation, maybe make a slight bit more power! I don't guess the little qmb/gy6-50 is the best if you want power, a 150cc swap, gy6/QMJ with a 63mm bore, maybe a 4valve kit, it should do 70mph, maybe better.. Sustaining 35-45 should be easy! I'm wondering what groove is better for what? In the pulley , over stock dual angle? I think a engine with 170-180+cc would be more fun to ride, and much safer, I worry about getting ranover, ppl here in the US drive crazy! Especially when I'm crawling up a 45 mph hill, at 15-20mph!
ok lang ba magpalit ng racing torque drive at palitan n rn ung pulley sample kng my mtrt or jvt or other branded ng cvt wla bang iaadjust sa ecu or itotono po plug and play lng ba cia
ung click 125 ko nag 115 dating 108 ang topspeed center spring 1000 rpm cluctch spring 1000rpm jvt pullet set stock torque drive sun clutch assbly (nmax) clutch bell NCY
,ayuz! sakto plano q bumili nyan para kompleto nah panggilid ng honda beat street q. jan den aq nag-TS sa mabitac straight. hehe... salamat sa review paps. dali maunawaan. pa-subscribe paps hane?
@@lotlottolentino7292 hello sir! maraming cause ng dragging. 1 yung flyball mo upod na and yung slide piece mo maalog na. 2. yung clutch lining mo hindi kumakapit sa bell dahil madumi na. 3. yung clutch lining mo madumi at hindi sabay ang buka. Usually ang ginagawa is nag papalit ng bola kung upod na. Also change your clutch lining into racing clutch yung makapal para kumapit ng husto sa bell. also clean your cvt system every 2-3mos. para smooth lagi ang takbo. hope it helps.
hi sir, still ok naman yung torque drive almost 8 mos ko cyang nagamit before ko na benta yung click ko. best for daily use and may konting dagdag torque sa click. not much pero sapat na basta na tono mo yung bola
@@kayearias8772 uu madami paps, make sure na original ncy torque drive ang nabili mo. yung sa akin wala naman problema. till now yan parin gamit ko. mas gusto ko yung laro nya compare sa stock ko. pero riders preference lang naman yan sir. if mag uupgrade ka, i pang last mo na yan. invest ka sa pulley at bola and springs. :) mas makakatipid ka sir. :)
Kaya pala stagnant muna top speed ko sa 110 saka mag 120 eto lng pala problema🤣 ganda ng review paps may natunan rin ako
Nakabili ka boss? Di ko makita sa shoppee
Nice, I ordered just the adjustable sheave, for my 139qmb, from NCY , it says for DIO, I guess they are a lot that are the same, I can't really tell a difference, but I got no paperwork with the sheave, not even a box, it was covered in dust, could it be a knock off? It says NCY, you never know these days! I have done about everything possible to get more power from the qmb, it's bored to 81cc, ported head, intake, and matched, a decent exhaust, I'm starting to think maybe the previous owner added gears, but I live where there is alot of hills, and weigh 3x what he does, I have to spin 10k to get 55mph, but I'd be happier to be able to maintain a cruise speed around 40-45! Over a peak speed, on flats or slightly downhill, with nothing up hill, I think my enginrvmay be down on power fue to a slightly low compression, but my gauge may be wrong, 155psi, I figured it should be closer to 170, I'd like to get it to about 200-205 psi, and run around a 100 octane fuel, maybe a water methanol injection for the steap hills, to prevent spark knok, detonation, maybe make a slight bit more power! I don't guess the little qmb/gy6-50 is the best if you want power, a 150cc swap, gy6/QMJ with a 63mm bore, maybe a 4valve kit, it should do 70mph, maybe better.. Sustaining 35-45 should be easy! I'm wondering what groove is better for what? In the pulley , over stock dual angle? I think a engine with 170-180+cc would be more fun to ride, and much safer, I worry about getting ranover, ppl here in the US drive crazy! Especially when I'm crawling up a 45 mph hill, at 15-20mph!
Paps.. pa Review naman ako ng Old PCX spring..
na Anti dragging daw sa Click ntin.. kay Ryo and MJ..
#RideSafe
yes sir. yan gamit ko sir. maganda cya. wala dragging
salamat paps.. plano ko kasi pakabit ee.. !
pa Shoutout Next Vlog ! RS paps!
#Vidzmoto
@@VidzMoto anong spring po sir?
Paano po naging 900rpm ang clutch spring nyo sir?
Sir mas malaki ba ang buka niyan kesa sa stock?
ok lang ba magpalit ng racing torque drive at palitan n rn ung pulley sample kng my mtrt or jvt or other branded ng cvt wla bang iaadjust sa ecu or itotono po plug and play lng ba cia
ung click 125 ko nag 115 dating 108 ang topspeed
center spring 1000 rpm
cluctch spring 1000rpm
jvt pullet set
stock torque drive
sun clutch assbly (nmax)
clutch bell NCY
7 kph lang na increase eh hindi po ba sayang lang money sa upgraded parts plus fuel consumption?
Can I add it to a Honda Zoomer x?
Same Lang ba torque drive ng pcx at click
paps san ka naka order nyan sa shopee? wala ako mahanap sa shopee eh
Bosing ano yun bell mo at Pulley set?
That will.not affect the speed ..kung palitan mo gearings mo may epekto...sa starting lang yan mabilis niyang ipitin yung belt😎
Anong bell po gamit nyo?
Sir, please elaborate more about 45 and 50. Salamat po.
45 for acceleration, 50 for top speed yan para ma gets mo kaagad
matagal na to HAHAH thanks anyway@@PapiJoshTV
Keep it up paps.. 😎👍
Sir anu brand ng side mirror nyu ?? Slamat po
Please ask me that this torque drive affect to 110cc engine 😁😆
Pede po ba yan sa click game changer 125? Same po ba torque drive ng ver 1 and ver 2?
i think pwede sir
Boss iba ung pang m3? Walang pa 50degree?
Sir anong lining gamit nyo? thanks
boss ncy pullet set vs proj fi ano payo nyo mas ok. at san makabili ng mura n legit slaamt in advance bossing
Fit ba sa click 125? Sana masagot. Thanks
Yes sir pang 125 at 150 po sya
boss pang pcx torque drive?
anong lining gamit nyo?
Sir saan mo naorder yan pwede makahingi kung saan mo nakuha
Next MKN mkn torque drive assembly
anu brand ng 1000rpm center spring gamit mo dito paps? kamusta din naman review mo ng CLD Racing 1000rpm center and clutch spring?
Paps Stock center spring and 900 rpm clutch spring lang gamit ko dyan. yung CLD for review pa, ill post a video soon
Ano full cvt set nyo sir idol ?
Ano po name ng seller sa shoppee.. mag order po sana ako
Sir ano maganda na torque drive ncy, jiso, sun o racing monkey?
so far ncy lang ang na try ko sir. ok naman ang kanyang performance. pero im not sure on the other brand, kanya kanya rin po kasi yan na tono rin.
mas ok b yan kesa s koso
sir wala na ako mahanap neto.. may ma recommend ka po ba na iba bukod sa stock?
try mo RS8 sir
Idol vids ano gamit mo center spring?. Bat 1000rpm nalang?. Diba ung old pcx spring 1200rpm un?
hi sir, naka high speed gear ako sir yung 13th tooth gear ako. mas hiyang ako sa 1000rpm sir. konti lang difference
@@VidzMoto anong brand nang 1000rpm mo sir?
@@VidzMoto 13t or 14t?
@@rodereijansanchez1849 13t sir
@@VidzMoto diba stock ang 13t? 14t un racing monkey na pinalit mo nun?
sir! pwede kaya yan sa sa honda click 125 v1
yes pwede sir
Paps kamusta ung gearing mo??
sulit sir. maganda performance ng racing monkey 13teeth gear
Boss saan kaya nkakabili ng oring o
And oil seal nya thanks!
paps gd am, yan di ang problima ko parang walang mabili na o ring yan. iba kc yung sa stock.
Sir ok lng po ba mag palit ng racing torque kahit stock engine? Thanks po
yes sir, no problem naman po
,ayuz! sakto plano q bumili nyan para kompleto nah panggilid ng honda beat street q. jan den aq nag-TS sa mabitac straight. hehe... salamat sa review paps. dali maunawaan. pa-subscribe paps hane?
Sir vidz,, SAAN mo po na order ito ano po store
Sa Shopee Sir
Sir pahingi ng link hinde ko makita sa shoppee 😌
May link ka sa shoppee paps? Di ko masearch eh
paps try mo tanong sa JDO Motorcycle kingdom facebook.com/jdomotorcyclekingdomtrading
Boss pwede ba yan sa 150i v2 game changer? Salamat boss.
Pwedeng pwede sir
@@VidzMoto thankyou sir!
Idol new subs. Mo po.. Ask ko lng kung ok mag palit ng gear kahit stock engine click 125 slamat
yes sir, wala nama pong problema, yung sa akin naka 14T ako, ok naman swabe naman po.
Sir kamusta naman po performance ng big pulley mo? Sumasagad po ba belt? Salamat po
hi sir as ive check, hindi ko pa nasasagad ang pulley. pero so far maganda ang acceleration.
Magkano at saan nabibili lods?
Boss anong brand ng center spring mo?
sir gmit ko ngayon CLD 1000rpm center spring
Ang ncy ,.pag tumagas n Wala Kang mabibilhan Ng oilseal nya....
Sir pwede din ba yan sa adv 150 ?
na try ko sir, pero pag pag ang belt
magkano bili mo sir, pwde pabulong?
3600 bili ko nyan sa shopee sir
@@VidzMoto salamat sir ridesafe more reviews😁😆
I like the intro song
may link po ba kayo sir pa pahingi po salamat💙
New sub bro
Paps.. magkano lahat lahat nagastos mo para sa upgrade???
paps, 3600 yung torque drive and labor sa pagkabit mga nasa 300.
Paps ..anu b.maganda para.ma
Tangal yun dragging ng click natin
@@VidzMoto san ka nakabili at nagpagawa paps. After ng lockdown balak ko na upgrade pang gilid ko
@@lotlottolentino7292 hello sir! maraming cause ng dragging. 1 yung flyball mo upod na and yung slide piece mo maalog na. 2. yung clutch lining mo hindi kumakapit sa bell dahil madumi na. 3. yung clutch lining mo madumi at hindi sabay ang buka. Usually ang ginagawa is nag papalit ng bola kung upod na. Also change your clutch lining into racing clutch yung makapal para kumapit ng husto sa bell. also clean your cvt system every 2-3mos. para smooth lagi ang takbo. hope it helps.
@@Germlin_boy dun ako nag papagawa kina Ryo and MJ sir sa binangonan. yung pyesa sa shopee ko lang nabili yan
link ng shopee bossing
Sir kamusta yung performance ng NCY Td mo ngayon simula ng nabili mo? Tia
hi sir, still ok naman yung torque drive almost 8 mos ko cyang nagamit before ko na benta yung click ko. best for daily use and may konting dagdag torque sa click. not much pero sapat na basta na tono mo yung bola
Idol pa link naman san mo nabili. Salamat!
paps sa shopee ko lang yan nabili
Magkano bili mo sir
3500 sir sa shopee
Kumusta performance sir?
@@bryanbangon6717 maganda sir lalo na kung nakabig pulley ka
@@bryanbangon6717 maganda performance sir, lalo na pag naka big pulley, mabilis at linear ang takbo.
Ito hinahanap ko sira ang ball bearing ng v1 click ko ..di makuha ang ball bearing ..
Pasigaw ng pangalan sir
Paps palitin daw ung oil seal nyan. Kada kelan ang palit?
depende sa gamit sir, every 4-6 mos dapat ma check
Hindi naman po ba mahirap maghanap ng oil seal para diyan?
@@VidzMoto paps dame ako nababasa na review sa ncy td hnd daw ok??
@@kayearias8772 uu madami paps, make sure na original ncy torque drive ang nabili mo. yung sa akin wala naman problema. till now yan parin gamit ko. mas gusto ko yung laro nya compare sa stock ko. pero riders preference lang naman yan sir. if mag uupgrade ka, i pang last mo na yan. invest ka sa pulley at bola and springs. :) mas makakatipid ka sir. :)
Link naman po Sir Salamat 🙏
shopee.ph/product/93730994/2873423494 yan sir, pero check nyo rin sa lazada baka may seller din. Meron din po sa JDO Motorcycle kingdom dito sa Pasig
@@VidzMoto sayang sold out na :(
bro, you should put a sub bcs not only philippines ppl watch your video
I will bro, thanks for the tips.
Sir pasok ba yan sa pcx 150 ?