Quick tip for placing: in constrained movement, you can swap between 'world' orientation and 'local' to the object, meaning any movement will be aligned to any rotations you may have done. More importantly, this changes the hitbox interaction rules; in fact so much so that you can often fully clip objects even thru the orbiter's walls. Still very finicky, but helpful for many situations such as trying to get the wall panel behind the pet station. Especially useful when trying to align things that aren't grid and/or angle snapped
My problem is often the object will refuse to move in one direction, but it will move the other way just fine. Then it gets stuck and won't go back to even where it was originally. It's likely a bug. Articulas also reset to a greyscale or textureless model if you attempt to resize one after adding a model.
@@Darthmufin it's the wonky hitbox rules. Free place, world constrained, and local constrained all use different collision rules. Usually, if you can intersect the problem object slightly more in one mode, it often will allow movement past the point the other modes limit UNLESS you back out past the area it was binding on before. You also might need to try maneuvering from an unrelated point while keeping the whole object out of bounds to place in extra tricky areas.
@@DistastefulDarkness I say there are two hit boxes, but I can’t that with 100% certainty, the objects collision hitbox and what I call placement hitbox. The placement hitbox is small point on the object typically at the same place as the constrained movement arrows. If the placement hitbox is touching a collision hitbox it won’t place. You can move a object any where you want as long the placement hitbox stays in a given area. When moving in constrained movement it checks every time you move a object so you can’t move in a object but if it already inside another object you can move freely inside the object but as soon it moves out it cannot move back in, why? Don’t know I think when you’re inside you can just move freely. That’s what I “understand” with my basic program knowledge and messing around with it for 4 years from time to time I hope this helps
important thing with decorating in general but especially around the pet station: YOUR PET HAS A HITBOX FOR SOME REASON! I was trying to place a zariman mattress for my pet to sleep on but found that I couldn't and noticed that after giving my pet to the helminth to babysit, it worked fine!
Got into oribiter decorating and love the ideas good given me with the Duviri planters. Recent devstream has revealed the Orbiter is getting a lighting update, super excited for that.
I usually don't comment on videos but man, you're a godsend. The table in the relics area is genius, i hope you don't mind me copying that a little haha But yeah your style of decorating is my favorite so far, you make the orbiter look like a home and almost cozy. Cheers
@@zppv5981 oh what i meant is like how you have look presets, that but for your orbiter so you can try out different decoration placements without losing the original ones
5:09 i use that zariman plynth thing behind my arsenal so its like a podium, except upside up, it also slightly reflects light effects created by frames
Returning player from years, always loved decorating dojos very happy to see grindable decos especially for orbiter, once im caught up on content im going to have to decorate mine more
I have a gaming setup in the personal quarters but nothing like this lol. I could never get objects to clip into the ship, especially the foundry area. It will just show up as red and refuse to place.
Hello again & i have a few things i will say 1 Very Beautiful Orbiter still 2 10:09 with constrained movement you can actually clip any decoration through anything by rotating decoration with 15 degree angle once which will make item clip into the surface of a object then switch to local placement then push the decoration pass the surface of object this works for every decoration & any surface but note many decorations have their own anchor point which can affect the placement of a decoration & some places can have a red zone depending 3 if you want to because i'm gonna be showcasing my orbiter sometime idk when yet but if you want i can let you know when it's done so you could see it if you want it's been alot of fun decorating it this year & GN Or Good Day to you
I honestly need more options of the golden filigree style that was introduced in Entrati labs. I'm emulating my own alchemist themed orbiter and that aesthetic fits so strong. Sadly, i have to rely primarily on the orbiter itself to maintain the metallic hues and golden colors. Through this i introduced copper metallic weathering as too many decor items that fit from the Zariman are weathered. What i would like is more option to include stone or darker wood, but Warframe really likes their bright and cool colors while i am a dark and warm person.
Do you have any experience with placed objects, specifically how they interact with physics objects, like the Dog Days Beach Balls? I have an issue with my orbiter as the beach balls are prone to get forced through solid placed objects when under stress
Yeah it's just the Fabled Gene Masking kit from Nightwave, but it's on a Helminth charger which might be why it's abnormally large? I'm not sure, I don't own any other Kubrows.
I bought mantis landing craft and idk how to install it..the option orbiter is not showing in my equipment options😢 Can u pliz tell me how to unlock it im mr 5
It's just completing the Steel Path Circuit and experiencing every single mission type in that game mode, the Steel Path Duviri Experience, and the Steel Path Lone Story.
I’ve completed sp circuit so story and experience but within the episode game mode, do I have to complete all the puzzle /mission types/ guitars that are all around the map
It’s a completely different picture but exact same shape. Idk the one he has but the one I have is called Argyle and it comes around in Baro’s inventory.
Quick tip for placing: in constrained movement, you can swap between 'world' orientation and 'local' to the object, meaning any movement will be aligned to any rotations you may have done. More importantly, this changes the hitbox interaction rules; in fact so much so that you can often fully clip objects even thru the orbiter's walls. Still very finicky, but helpful for many situations such as trying to get the wall panel behind the pet station. Especially useful when trying to align things that aren't grid and/or angle snapped
My problem is often the object will refuse to move in one direction, but it will move the other way just fine. Then it gets stuck and won't go back to even where it was originally. It's likely a bug. Articulas also reset to a greyscale or textureless model if you attempt to resize one after adding a model.
@@Darthmufin it's the wonky hitbox rules. Free place, world constrained, and local constrained all use different collision rules. Usually, if you can intersect the problem object slightly more in one mode, it often will allow movement past the point the other modes limit UNLESS you back out past the area it was binding on before. You also might need to try maneuvering from an unrelated point while keeping the whole object out of bounds to place in extra tricky areas.
@@DistastefulDarkness The trick for me is I put wooden floors in my ship first and don't have your warframe near where you are building.
@@DistastefulDarkness I say there are two hit boxes, but I can’t that with 100% certainty, the objects collision hitbox and what I call placement hitbox. The placement hitbox is small point on the object typically at the same place as the constrained movement arrows. If the placement hitbox is touching a collision hitbox it won’t place. You can move a object any where you want as long the placement hitbox stays in a given area. When moving in constrained movement it checks every time you move a object so you can’t move in a object but if it already inside another object you can move freely inside the object but as soon it moves out it cannot move back in, why? Don’t know I think when you’re inside you can just move freely. That’s what I “understand” with my basic program knowledge and messing around with it for 4 years from time to time I hope this helps
important thing with decorating in general but especially around the pet station: YOUR PET HAS A HITBOX FOR SOME REASON! I was trying to place a zariman mattress for my pet to sleep on but found that I couldn't and noticed that after giving my pet to the helminth to babysit, it worked fine!
Amazing orbiter, very beautiful, my favorite part was the mini grineer guy crashing on the couch lol 4:00
You really inspired me to play warframe and get my orbitor as beautiful as yours. Would love to see some of your fashion frames. Great video!!
Got into oribiter decorating and love the ideas good given me with the Duviri planters. Recent devstream has revealed the Orbiter is getting a lighting update, super excited for that.
I usually don't comment on videos but man, you're a godsend. The table in the relics area is genius, i hope you don't mind me copying that a little haha
But yeah your style of decorating is my favorite so far, you make the orbiter look like a home and almost cozy. Cheers
I love orbiter decorations that are unique and this is most certainly one of those
The one thing i would kill for is orbiter decoration presets so i could do different looks
They kind of have seasonal ones but I’d like more variations and styles as well. Would be sick
@@zppv5981 oh what i meant is like how you have look presets, that but for your orbiter so you can try out different decoration placements without losing the original ones
5:09 i use that zariman plynth thing behind my arsenal so its like a podium, except upside up, it also slightly reflects light effects created by frames
Returning player from years, always loved decorating dojos very happy to see grindable decos especially for orbiter, once im caught up on content im going to have to decorate mine more
You are such an outstanding interior design artist!!😮
Wisp love your home.💚
Love the choice in music
I have a gaming setup in the personal quarters but nothing like this lol. I could never get objects to clip into the ship, especially the foundry area. It will just show up as red and refuse to place.
Hello again & i have a few things i will say 1 Very Beautiful Orbiter still
2 10:09 with constrained movement you can actually clip any decoration through anything by rotating decoration with 15 degree angle once which will make item clip into the surface of a object then switch to local placement then push the decoration pass the surface of object this works for every decoration & any surface but note many decorations have their own anchor point which can affect the placement of a decoration & some places can have a red zone depending
3 if you want to because i'm gonna be showcasing my orbiter sometime idk when yet but if you want i can let you know when it's done so you could see it if you want it's been alot of fun decorating it this year
& GN Or Good Day to you
I need mhw endgame room music while decorating my orbiter now thanks
samee aaa
I honestly need more options of the golden filigree style that was introduced in Entrati labs. I'm emulating my own alchemist themed orbiter and that aesthetic fits so strong.
Sadly, i have to rely primarily on the orbiter itself to maintain the metallic hues and golden colors. Through this i introduced copper metallic weathering as too many decor items that fit from the Zariman are weathered.
What i would like is more option to include stone or darker wood, but Warframe really likes their bright and cool colors while i am a dark and warm person.
It would be amazing if they allowed us to group objects together, decorating as a whole would be easier
Great video!
What color is your orbiter exactly and from which pallets?
i wanna do this so bad but its so intimidating
Bro sounds like baro
Impressive
Very nice 👌
What are the colors for the orbitor? I love the look
in the first video he posted!!
I’m like 250 hours in, and I’m so confused right now lol
God I'm jealous
Do you have any experience with placed objects, specifically how they interact with physics objects, like the Dog Days Beach Balls? I have an issue with my orbiter as the beach balls are prone to get forced through solid placed objects when under stress
Where did you get these beautiful columns and vases?
is it just me or that dawg at 1:03 is huge? which one is that? some deluxe skin?
It’s the fabled gene masking kit from the nightwave ending soon, but I don’t know about the size
Yeah it's just the Fabled Gene Masking kit from Nightwave, but it's on a Helminth charger which might be why it's abnormally large? I'm not sure, I don't own any other Kubrows.
It’s probably just huge, I have a Kubrow that’s abnormally short. He is like halfway up my frames shins, he’s my attack chihuahua
what color do you use for your oribiteur pls ? its very beautiful ^^
Oh the cost of all the enigma gryum. It's so pretty but so expensive
I bought mantis landing craft and idk how to install it..the option orbiter is not showing in my equipment options😢
Can u pliz tell me how to unlock it im mr 5
On 1:05 is that duviri kubrow or kavat or just skin,how to get that?
How do your duviri decorations look clean mine always look dirty
Is that duviri dog decoration or kubrow skin?
Any Ideas for a drifter's camp decorations?
3:55 where find that zariman bench?
How does one get these flooring and walling stuff? Ive never seen that kinda stuff
you should be an enlgish teacher
to get the mask is it all the mission that give you decrees?
It's just completing the Steel Path Circuit and experiencing every single mission type in that game mode, the Steel Path Duviri Experience, and the Steel Path Lone Story.
I’ve completed sp circuit so story and experience but within the episode game mode, do I have to complete all the puzzle /mission types/ guitars that are all around the map
What are the orbiter colors here? They seem different from the last one
2:13 what display is that
It’s a completely different picture but exact same shape. Idk the one he has but the one I have is called Argyle and it comes around in Baro’s inventory.
@@garethadams6962 thx