Impressed with you tackling this DYI. I now remember why I pull my wheel and bring it to my local guy. He does it for 50$. Glad to know that I could if I had to do it myself if he changes his price.
handling biz immediately with the liability disclosure, much respect. no goofy, shocking, dramatic, suspenseful, overdone, exaggerated, loud, music filled intro. much more respect!
don't forget to check the valve stem's rubber body as it wears before throwing the tire on, and cleaning the wheel inner walls where the tire bead sits when needed
I don’t think I have patience to do this but I wish I did because my guy just called and said he’s having trouble getting a new tire to bead due to corrosion. They’re aluminum wheels, I take good care of the motorcycle, seldom ride in rain, never soak down the bike with the hose when cleaning, it’s in the garage every night so I can only imagine moisture stuck inside from the goop they use to mount a new tire. I use the same guy every tire change and have had them changed six times so far over my time of owning this bike.
not to mention, keeping your palms and fingers clear of the tire/wheel as you're popping the bead, else pray you have it in you to deflate while in pain before rushing to someone in emergency
Nice demonstration of replacing a motorcycle tire 👌 (doesn’t look easy , since you got to fight and man handle it into place , and try ur best not to get hurt ), going to give it a go tho’ , once I’m ready to invest in a better set of tire changing tools , kinda afraid of the simple hand tools knicking , scratching , or dropping those tools on a surface it wasn’t intended for, idk maybe I’ll give it a shot on a practice motorcycle wheel and tire , before I actually try it on one of my own bikes 🤷🏻♂️✅anyhow thx 🙏 for Sharing
Thats exactly how i looked taking out the tires 2 days ago breathing hard and sweaty except i scratched the crap out my rims i was using the spoons off amazon that you showed took me about 3 hours to do them but it was my first time ever doing this by myself i popped the bead with a shovel up against the edge of the lip and jump on the shovel made it easier
Thank you for sharing this video and getting straight to the point.I like how you did not edit out the struggle of getting the tire off. Like you, I purchased the Amazon tire spoon kit and just purchased the Motion Pro tire removal kit. The advice I can share that I learned from another TH-cam video, is to set your tires out in the sun or heat up with a hairdryer.
If you use some ratchet clamps on the tire to squash it together at the beginning The tyre will go in the concave section of the rim And make it really easy to fit It sometimes makes it possible to fit them with your hands instead of levers I have fit really difficult electric scooter tyres and tight bicycle tyres with my bare hands using this method Have fun😃
Use a lot of windex when dismounting, it helps break the beads a lot. Also, before re-installing the new tire, remove the old weights off the wheel and check wheel balance without tire, it's not always the valve stem that is the heaviest spot.
Spot on 👌🏽 I was surprised that even with a tyre pressure sensor the heaviest part wasn’t there… tried it 3 times. Mark the lowest point /heaviest then align the yellow / red dot with that. And balance both 🍻
Tip - the tire will slip off the rim with minimal effort if you press one end of the tire bead into the valley of the rim while using the spoon on the other end to get the bead over the rim.
I do not know what it is, some videos make it seem ridiculously easy to fit a new tire on to the rim, and some make it seem like a bit of a challenge. I am about to change front and rear tires on my track bike in two days and i am kind of hoping it will be an easy task. very good video by the way, it isn't cut to mkae it seem like a tire change is a 5 minute thing
@@motorcyclemaintenancechann2131 I'll be changing them in the morning, so if the sun isn't out yet I've read that sticking a hairdryer inside of the tire for a few minutes also is a good substitute to heat them up a bit. Hopefully all goes well!
NEVER EVER remove the back side like he did. One slip of that bar and you will lose your front teeth. Keep the bars as far away from your face as possible.He has the right idea just take some more precautions so you don't knock your teeth out. And use some liquid soap on the bead. But remember the slicker the tools the easier it is to slip out and bust up your face.
![Shareปลาวาฬ ส่งท้าย SS1 พาเปียโน ขึ้น Ferrari ก่อนไปขาย แลก Nissan l [Nickynachat]](http://i.ytimg.com/vi/KAknGkTNIvg/mqdefault.jpg)
I like to watch a few tire changing videos before I take my tires to get changed. 😀
Impressed with you tackling this DYI. I now remember why I pull my wheel and bring it to my local guy. He does it for 50$. Glad to know that I could if I had to do it myself if he changes his price.
Thanks for watching! Definitely gotten a lot better at it since this video was released
handling biz immediately with the liability disclosure, much respect. no goofy, shocking, dramatic, suspenseful, overdone, exaggerated, loud, music filled intro. much more respect!
I really appreciate that this video has no time skips.
don't forget to check the valve stem's rubber body as it wears before throwing the tire on, and cleaning the wheel inner walls where the tire bead sits when needed
I don’t think I have patience to do this but I wish I did because my guy just called and said he’s having trouble getting a new tire to bead due to corrosion. They’re aluminum wheels, I take good care of the motorcycle, seldom ride in rain, never soak down the bike with the hose when cleaning, it’s in the garage every night so I can only imagine moisture stuck inside from the goop they use to mount a new tire. I use the same guy every tire change and have had them changed six times so far over my time of owning this bike.
I like how you're in the living room. Good tip on checking direction 👍
not to mention, keeping your palms and fingers clear of the tire/wheel as you're popping the bead, else pray you have it in you to deflate while in pain before rushing to someone in emergency
Nice demonstration of replacing a motorcycle tire 👌 (doesn’t look easy , since you got to fight and man handle it into place , and try ur best not to get hurt ), going to give it a go tho’ , once I’m ready to invest in a better set of tire changing tools , kinda afraid of the simple hand tools knicking , scratching , or dropping those tools on a surface it wasn’t intended for, idk maybe I’ll give it a shot on a practice motorcycle wheel and tire , before I actually try it on one of my own bikes 🤷🏻♂️✅anyhow thx 🙏 for Sharing
Thats exactly how i looked taking out the tires 2 days ago breathing hard and sweaty except i scratched the crap out my rims i was using the spoons off amazon that you showed took me about 3 hours to do them but it was my first time ever doing this by myself i popped the bead with a shovel up against the edge of the lip and jump on the shovel made it easier
I got the Amazon set also and the protectors got eaten thru by spoon leverage
Brother set them out in the sun next time before you change them, makes the rubber so much more pliable and easier to manipulate! Awesome tutorial!
Yes, they’ll be in the sun before attempting the next install 😎
Thanks for watching! And thanks
i'm hearing that tip a lot! going to change mine in two days, hopefully the sun will be at at that time in the morning!
Thank you for sharing this video and getting straight to the point.I like how you did not edit out the struggle of getting the tire off. Like you, I purchased the Amazon tire spoon kit and just purchased the Motion Pro tire removal kit. The advice I can share that I learned from another TH-cam video, is to set your tires out in the sun or heat up with a hairdryer.
If you use some ratchet clamps on the tire to squash it together at the beginning
The tyre will go in the concave section of the rim
And make it really easy to fit
It sometimes makes it possible to fit them with your hands instead of levers
I have fit really difficult electric scooter tyres and tight bicycle tyres with my bare hands using this method
Have fun😃
Use a lot of windex when dismounting, it helps break the beads a lot. Also, before re-installing the new tire, remove the old weights off the wheel and check wheel balance without tire, it's not always the valve stem that is the heaviest spot.
Spot on 👌🏽 I was surprised that even with a tyre pressure sensor the heaviest part wasn’t there… tried it 3 times. Mark the lowest point /heaviest then align the yellow / red dot with that. And balance both 🍻
Best lube then rim before you start, helps the tyre slip off the wheel. Thanks for sharing 🍻🇬🇧
Tip - the tire will slip off the rim with minimal effort if you press one end of the tire bead into the valley of the rim while using the spoon on the other end to get the bead over the rim.
The struggle is real! 😂
Wouldn't proper tire lube help with the install? I feel like water+soap will dry too fast
You want it to dry as soon as you put it on. You don’t want any additional moisture in the tire. Proper tire lube is just soapy water.
I do not know what it is, some videos make it seem ridiculously easy to fit a new tire on to the rim, and some make it seem like a bit of a challenge. I am about to change front and rear tires on my track bike in two days and i am kind of hoping it will be an easy task. very good video by the way, it isn't cut to mkae it seem like a tire change is a 5 minute thing
Having the tires out in the sun, or making sure they are a bit warm before you start the job, it’ll make the job a lot easier
@@motorcyclemaintenancechann2131 I'll be changing them in the morning, so if the sun isn't out yet I've read that sticking a hairdryer inside of the tire for a few minutes also is a good substitute to heat them up a bit. Hopefully all goes well!
"you can even cheat a little and help slow the momentum down"
Changing a tire in your living room. Tell me you’re a bachelor without telling me you’re a bachelor. 😂🤔….😔
Is the rear harder or easier ?
It would've been much easier if you had removed the brake rotor. It pops out if you wiggle it a bit.
Windex or soapy water
NEVER EVER remove the back side like he did. One slip of that bar and you will lose your front teeth. Keep the bars as far away from your face as possible.He has the right idea just take some more precautions so you don't knock your teeth out. And use some liquid soap on the bead. But remember the slicker the tools the easier it is to slip out and bust up your face.
เครื่องมือแบบนี้มีขายในประเทศไทยไหมครับ
Thats too long tire changing