WIFI Network Scan With ESP32 || WIFI SCAN ||
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2024
- WIFI Network Scan With ESP32 || WIFI SCAN ||
Chapters -
0:00 Start
1:24 Code Upload
2:43 Code Explanation
Code -
github.com/Rafeul1997/ESP32-W...
Product Link -
SquadPixel Esp-32 - amzn.to/48FXiWA
RoboThings ESP32 WROOM - amzn.to/3uLtESg
REES52 0.96" Oled - amzn.to/4a2oct7
XCLUMA ESP32 ESP-32 - amzn.to/49EEtVb
REES52 ESP32 - amzn.to/49VsylG
My Router - amzn.to/4amo2gm
Social Media Links -
TH-cam - / @guruofmicrocontroller
Facebook Page - profile.php?...
Instagram - / guruofmicrocontroller
Github - github.com/Rafeul1997
The ESP32 is a popular Wi-Fi and Bluetooth-enabled microcontroller developed by Espressif Systems. It's widely used for IoT projects, offering versatile features and a dual-core processor.
ESP32 is a series of low-cost, low-power system on a chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth. The ESP32 series employs either a Tensilica Xtensa LX6 microprocessor in both dual-core and single-core variations, Xtensa LX7 dual-core microprocessor or a single-core RISC-V microprocessor and includes built-in antenna switches, RF balun, power amplifier, low-noise receive amplifier, filters, and power-management modules. ESP32 is created and developed by Espressif Systems, a Chinese company based in Shanghai, and is manufactured by TSMC using their 40 nm process.[2] It is a successor to the ESP8266 microcontroller.
Features of the ESP32 include the following:
Processors:
CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS
Ultra low power (ULP) co-processor
Memory: 520 KiB RAM, 448 KiB ROM
Wireless connectivity:
Wi-Fi: 802.11 b/g/n
Bluetooth: v4.2 BR/EDR and BLE (shares the radio with Wi-Fi)
Peripheral interfaces:
34 × programmable GPIOs
12-bit SAR ADC up to 18 channels
2 × 8-bit DACs
10 × touch sensors (capacitive sensing GPIOs)
4 × SPI
2 × I²S interfaces
2 × I²C interfaces
3 × UART
SD/SDIO/CE-ATA/MMC/eMMC host controller
SDIO/SPI slave controller
Ethernet MAC interface with dedicated DMA and planned IEEE 1588 Precision Time Protocol support[4]
CAN bus 2.0
Infrared remote controller (TX/RX, up to 8 channels)
Pulse counter (capable of full quadrature decoding)
Motor PWM
LED PWM (up to 16 channels)
Ultra low power analog pre-amplifier
Security:
IEEE 802.11 standard security features all supported, including WPA, WPA2, WPA3 (depending on version)[5] and WLAN Authentication and Privacy Infrastructure (WAPI)
Secure boot
Flash encryption
1024-bit OTP, up to 768-bit for customers
Cryptographic hardware acceleration: AES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)
Power management:
Internal low-dropout regulator
Individual power domain for RTC
5 μA deep sleep current
Wake up from GPIO interrupt, timer, ADC measurements, capacitive touch sensor interrupt.
Wi-Fi scanning is typically done by a device, such as a smartphone or computer, to discover nearby wireless networks. The device sends out probe requests, and access points respond with their information. The device then compiles a list of available networks, including their names (SSID), signal strength, security protocols, and other relevant details. This information helps the device decide which network to connect to.
#wifi_scan
#esp32_wifi
#wifi_scanner
#wifi_network_scan_with_esp32
#esp32_wifi_manager
#esp32_wifimanager
#esp32_wifi_setup
#wifi_network_scan
#esp32_projects_wifi
#esp8266_wifi_manager
#esp32_connect_to_wifi
#esp32_qr_code_scanner
#wifi_network_scanner
#esp32_cam
#wifi
#scan
#wi_fi
#esp32_wifi_configuration
#esp32_wifi_setup_tutorial
#wifi_manager
#wifimanager
#esp32
#scanner
#esp32_cam_qr_code_scanner_arduino
#barcode_scanner
#esp8266_auto_connect_wifi - วิทยาศาสตร์และเทคโนโลยี
Today I watch this practical 😅😅❤
Keep watching for more practical video
No need to scan
Its the beginning, keep watching
Wifi ar password cai
Pawa jabe
Koba ame mara jaoar por
Erokom bolben na, nischoi video banie debo.