Thanks for sharing your experience with this motor configuration. I also experience that all the ebikes with torque sensors that I tested during start have some delays before the motor kicks in. One exception is my 64 lbs ebike that have brake sensors. Assist is instant. Good when starting in uphill situation. I've been shopping around for a lighter bike with same behavior without success.
My orbea rise only connects up to 15 seconds after switch on, as the documentation. Not tried beyond that but I guess they don’t want you fiddling with that while riding
Afaik, you can only set 2 profiles on the original ep8. There are 2 profiles on the new EP8 (EP801) and the EP6 also. But you can add multiple presets under each profile. See the part about Fine Tune Mode www.emtbforums.com/ams/we-rode-the-new-shimano-ep6-and-ep8-801-ebike-motors.49/
That's not possible with this tool using the basic level of access. I assume it's possible if you've got OEM access, which is a higher level than what most shops have.
This application is a joke, my new focus 7.9 dont work anymore i did a firmware update and after 63% the bike turn off and now it does not start. 7000€ bike with 30km its now broke
I tried searching, and could only find this page/video in Norwegian. Perhaps the video can be of some help. This is for E-Ride, but I guess it should be the same for E-Tube. www.shimano-steps.com/e-bikes/norway/no/news/E-BIKE-HOW-TO-E-TUBE
@@EMTBVideos I have the Shimano SC-E5000 display. With the Husqvarna MC5 2021 When I turn on the bike I find no Bluetooth signal in the E Tube app. Maybe the display does not have Bluetooth but in the manual it says that it works. Just not explained. Can you help me? I do not have an E5000 bike but a display.
Thanks for sharing your experience with this motor configuration. I also experience that all the ebikes with torque sensors that I tested during start have some delays before the motor kicks in.
One exception is my 64 lbs ebike that have brake sensors. Assist is instant. Good when starting in uphill situation. I've been shopping around for a lighter bike with same behavior without success.
Thanks again. Still appreciating your unbiased reviews.
It would be nice to be able to rename the modes. Like one profile for DRY, the other for WET :)
Great Idea for the Quick button for the settings.... @shimano
this was more helpful than the instructions
Thank you for another well made and very informative video.
How do you compare the 2021 Shimano EP8 with the 2020 Yamaha PW-X2?
Hey, wich setting would mostly affect battery consumption...the torque or the assist character?
It would really be nice if Shimano would offer micro tune functionality in a firmware upgrade for the older E7000, E8000 and EP800 😉
.........Have you figured out what the small dots mark (in "Assist customize" mode)?
My orbea rise only connects up to 15 seconds after switch on, as the documentation. Not tried beyond that but I guess they don’t want you fiddling with that while riding
hopefully, Shimano pays attention to you and takes your advice.
Can I create a profile 3, for one more assistance customization?
Afaik, you can only set 2 profiles on the original ep8. There are 2 profiles on the new EP8 (EP801) and the EP6 also. But you can add multiple presets under each profile. See the part about Fine Tune Mode
www.emtbforums.com/ams/we-rode-the-new-shimano-ep6-and-ep8-801-ebike-motors.49/
I have a Merida eONE-SIXTY 900 bike, every time I try to connect it writes to me like this. What should I do ?
Anyone know how to switch profiles on the EW-AN junctionA setup on the Rise?
Need be able to change country to somewhere with higher speed limit like NZ
That's not possible with this tool using the basic level of access. I assume it's possible if you've got OEM access, which is a higher level than what most shops have.
This application is a joke, my new focus 7.9 dont work anymore i did a firmware update and after 63% the bike turn off and now it does not start. 7000€ bike with 30km its now broke
Very helpful video, I’m trying to derestrict the EP8 motor so that it can go past the 25kmh restriction, do you know how?
Stunlocker
It’s impossible because it’s preset to Uk 15 mph you can’t overtake it so waste of time
Would this work for the EP6 rs motor too?
Yeah, I believe it will work.
I have the E5000 Display and it doesn't work?
Need help.
I tried searching, and could only find this page/video in Norwegian. Perhaps the video can be of some help. This is for E-Ride, but I guess it should be the same for E-Tube.
www.shimano-steps.com/e-bikes/norway/no/news/E-BIKE-HOW-TO-E-TUBE
@@EMTBVideos I have the Shimano SC-E5000 display.
With the Husqvarna MC5 2021
When I turn on the bike I find no Bluetooth signal in the E Tube app.
Maybe the display does not have Bluetooth but in the manual it says that it works.
Just not explained.
Can you help me?
I do not have an E5000 bike but a display.
Time blevo makes an app for shimano
Hola tú tienes idea cómo recuperar la contraseña para ingresar a una Ebike
I can't connect, I get an error all the time
way to complicated and unpractical... great video!