Great work car looks awesome loving the content. Can I ask regarding the lip if your driving on the motorway/highway at a speed of 70mph will the lip rip off. I got the same lip as yours wanting to install it but rainy/cold in the UK atm so will do it at some point. Was concerned as I read on some posts that’ it’s common to fall off at speed. I used the method of screw and bolts as screws they provided is poor. Also having issue with the side bits not fitting perfectly so probably will need to use heat gun to round it off like in your vid. Interested in your comments or advice you may have. Thanks. Peace
Front Bumper Lip Compatible With 2011-2016 BMW F10 5 Series | Performance Style Unpainted PP Air Dam Chin Protector Front Bumper Lip by IKON MOTORSPORTS | 2012 2013 2014 2015 www.amazon.com/dp/B01E54AFSI/ref=cm_sw_r_cp_api_i_K6v7Eb28J13Y9
Amazing!! one question, How did you remove the 2 side plastic and the 1 middle plastic in the bumper without removing the bumper? you did it at 5:37, and then you painted it. Need to do this too, and dont will damage it. I hope you will answer, Great work
The same way you remove the front grill the same way you remove the bottom plastics you just pull him tour you really hard and it will come off and then you will just push them back in and it will clip on really easy don’t be afraid to pull it out
Not sure if they have a stock but you can always email Dom and I will send you an email when is available or you can buy Ashley anyone from Ebay 👐🏼🤪🔥 they all good
Super cool😊😊😆
つっしーの筆 【Whiteboard Art】 thank you For your support
Where did you get the front lip? I didn't see a link anywhere for you to share?
Just look amazing ! I gotta change my front bumper LOL
Ceddy thank you yes you should
Lookin fresh my boi!!! 👌🏼👌🏼👌🏼
Rigo Quest
Thanks bro
Poco a poco
Rigo Quest ASI MISMO ES CON DIOS POR DELANTE
Yeaaaa boy
Could u tell me how to install front lower central grill on M package 2016 535
Is all clips you put it right out and you clip your back in
Great work car looks awesome loving the content. Can I ask regarding the lip if your driving on the motorway/highway at a speed of 70mph will the lip rip off. I got the same lip as yours wanting to install it but rainy/cold in the UK atm so will do it at some point. Was concerned as I read on some posts that’ it’s common to fall off at speed. I used the method of screw and bolts as screws they provided is poor. Also having issue with the side bits not fitting perfectly so probably will need to use heat gun to round it off like in your vid. Interested in your comments or advice you may have. Thanks. Peace
No Are used to do all of the time 150 and they remove a bit I also use my go pro on it the lip is solid
Do you have a beeping front parking sensors after installation? I installed and my front parking sensors squeak as if I drove close to the curb
No I don’t
Will it work if I don’t have the fog lights?
Yes 👍🏻
Like it, what’s next?
Hey jay great video, Do you have a link to the lip? and how was the fitment? 100% ? 75%? ??
Sergio Flores thank you bro
www.ebay.com/itm/264625492599
JayR- BMW F10 Thanks for the response, out of stock, but i’ll message them to see when they will have more. thanks.
Sergio Flores To be honest they all will fit the same the fitment was great I’m gonna find another one and I’m gonna send it to you
Front Bumper Lip Compatible With 2011-2016 BMW F10 5 Series | Performance Style Unpainted PP Air Dam Chin Protector Front Bumper Lip by IKON MOTORSPORTS | 2012 2013 2014 2015 www.amazon.com/dp/B01E54AFSI/ref=cm_sw_r_cp_api_i_K6v7Eb28J13Y9
Where did you buy at.
eBay
Do you have a link for the splitter?
www.ebay.com/itm/For-2011-2016-BMW-F10-5-Series-M-Sport-Front-Bumper-Lip-Splitter-ABS-Gloss-Black-/383950423772?_trksid=p2349624.m46890.l49292
Amazing!! one question, How did you remove the 2 side plastic and the 1 middle plastic in the bumper without removing the bumper? you did it at 5:37, and then you painted it. Need to do this too, and dont will damage it. I hope you will answer, Great work
The same way you remove the front grill the same way you remove the bottom plastics you just pull him tour you really hard and it will come off and then you will just push them back in and it will clip on really easy don’t be afraid to pull it out
How did you paint the bars that are in front of the radiator??
Lucian Dina I have a video down below I wrapped them
You can get the grill on eBay already done
@@TopVillain yes
Cuanto por los aros con gomas?
Pete Alias 1600 motadas y balaciadas
Where did you buy your lip?
Can I get the link where you bought it please
www.ebay.com/itm/283955676399
Thanks bro gonna order it ASAP
Where did you get the front lip? Can you share us?
Brian Y www.ebay.com/itm/Lower-Front-Bumper-Lip-Spoiler-For-11-16-BMW-5-Series-MP-Style-Sedan-Gloss-Black-/264625492599?_trksid=p2349624.m46890.l49292
Not sure if they have a stock but you can always email Dom and I will send you an email when is available or you can buy Ashley anyone from Ebay 👐🏼🤪🔥 they all good
That is awesome. I really appreciate your help!
Did the screws come with the kit?
Anthony Pipia yes
what year is this 550i
No is a 535 bro
@@jayr-lapresion8616 oh lol i’m dumb
We're the link my g
www.ebay.com/itm/114875305775?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2JXmu4PESFq&sssrc=2349624&ssuid=hndmwbvfsl6&var=&widget_ver=artemis&media=MORE
That voice is annoying AF! The splitter looks great. I'm gonna have to get one for my 08 550i with the Msport bumper
Wtf dude ....
Yea wtf wath
We see nothing :!
What kinda Ferrari you got?
WorldsOKestDad I don’t have a Ferrari
Don’t understand shit this guy says
Maybe this video is not for you