Reprogram 2 button remote fob 1999 Toyota Camry NOTE works on v6 2005 Camry Altiva 2 button fob too

Reprogram 1 button remote fob on 1999 Toyota Camry 2.2 Litre motor Australia. Works on this genuine Toyota fob or a generic cheap copy

[@VK-tl5dp]

I recently purchased a 2004 Camry with a broken fob. I bought a couple of fobs on eBay for $40 the pair and then followed your instructions. No specific security light went on but I went ahead and assumed it was activated and pressed the fob. It worked! I then followed with quick succession the second. Both indicators did flash. I had to do the process twice because I had three door unlocked and one locked. Just need to make sure all doors are unlocked and then press the unlock button on the new fob. It then activated for the three button configuration. Lock, unlock and boot.
Super big thanks to you!!

[@peterlangtry]

Thank you. With the drivers door left opened, these instructions worked perfectly on a right hand drive 2000 v6 Camry

[@skiddosaurusrex3524]

Absolute madlad. Every other piece of info I could find on this must relate to the left hand drive models, from finding the key receiver and pressing button to cycling the lock and door countless times, then boom 3 key turns and done. Thanks!

[@skiddosaurusrex3524]

would like to add to this that according to the manual you can also use this process (sec light on) to turn the horn beep on and off by tapping the horn (this will cycle the locks to confirm) and by pressing the unlock button on the dash, this will set it to dual stage locking (first unlocks only driver, then all doors)

[@stevecamo1]

Thank you Sir your a true gentleman just fixed my daughters car because of you. And you went through the instructions nice and slow did not have to replay over again. Good stuff.
Cheers Steven

[@callmexxjacobxx]

Im also in Australia but i have a 1998 camry, cheers for your video being very clear but also quick and brief

[@ProfessorOzone]

You certainly do a great job of sounding like an Aussie robot, but you got the job done clearly and simply so. . . upvote for you my friend.

[@raymondkan1753]

You are a great man and saved me a $100. Thank you very much for your brief description.

[@slaktriffid]

Worked like a CHARM!!!! It was on a 1999 camry vienta wagon 3ltre v6
thankyou.:)

[@nolove8058]

you are a legend mate thank you.

[@dizzyalf]

To program 2 or more remotes you need to quickly press the buttons on each remote before the security light turns off. Do not hold the remote button down because that will just write to the same remote 4 times over. You can program up to 4 remotes. You have to do them all quickly before the security light turns off because it forgets all other codes each time you do the process.

[@adamcathro955]

Your a top bloke Glen!

[@gchap7986]

Hey buddy I use your advice and I solve the problem I’m very happy thank you very much great job

[@str8gmc530]

australian arnold

[@tenthbust]

Thanks Glen. It worked

[@User69390]

Hi mate
Would u think key fob with 2 buttons programming lock and unlock will work ?
Many thanks

[@peterware9935]

Thanks for your help just did my fob in my Toyota Camry 2000 .it worked great thanks. cheers Peter

[@TheSquare777]

Bloody legend mate!

[@grahampaton5851]

Hi Glen... have you got any other videos to show how to reprogram a key for this same Australian car??? Thanks

[@grahampaton5851]

Hi Glen... could you do a video on how to reprogram a blank key for this same Australian built Camry??? Thanks

[@patrickpalmarella4928]

do you know how to break into this car... i left my key in the ignition. ..engine off dead battery...i have break in kit... just need advice

[@chuanfuwang6986]

Hi, my original fob is broken. Do you know where can I buy a cheap copy, so I can programme the copy?

[@mmu1964]

How many frequency of remote?

[@ad.6472]

Hi there, where did you buy the remote?

[@emircan8840]

Anybody knows where to get a new remote? Originals are around $85 and I am just curious if there is any cheaper option online or around melbourne
Thanks

[@callmexxjacobxx]

Emir Can ebay has some aftermarket ones for $35

[@IanHard13]

great video. thank you. one thing though, will not let me program more than one fob. any ideas?

[@ng4410]

I'd check youtube for that info...or eg a toyota repair forum..

[@IanHard13]

no worries, i'll do some searching and see what I can find.

[@ng4410]

If you get answer to 2 fob programming post it here for informing others thanks.

[@ng4410]

a reply to this is in the comments here. Explains a 2 fob setup..

[@teddiedavis3165]

could anyone tell me where i could buy a blank remote for my toyota seca 1999 model tks

[@jandoey6600]

Mate a 5sfe is a 2.2 not a 2.4 , that's a 2azfe and didn't come in that model .

[@ng4410]

Agree is a 2.2 litre my mistake..

[@neel1173]

does this work for a 91 toyota?

[@ng4410]

i am not sure.
Try the demonstration and see how it goes.
Works for later Camry 2004.

[@ataidecouto9481]

would that work on a 1998 csi camry

[@ng4410]

am not sure ..try the steps in video.
it works on my 2004 v6 camry as well.

[@ataidecouto9481]

@@ng4410 ok thanks

[@salpaca53]

Yes.

[@Itsme-dv7wc]

It’s no work

[@ng4410]

if same button set on fob it does work..Used it other day to set a second fob. Must follow exactly.

[@nallorlives]

It's not working for me either