1957 Cadillac 365 engine gets disassembled | Redline Update #71

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 ธ.ค. 2024

ความคิดเห็น • 273

  • @waynesmith7487
    @waynesmith7487 3 ปีที่แล้ว +18

    Yes, Davin, I spent the last weekend with my son working on a project car of his. Wonderful experience sharing the time with him ❤.

    • @MrSloika
      @MrSloika 3 ปีที่แล้ว +2

      This past weekend I took apart a mechanical wrist watch, cleaned, reassembled, lubed and regulated.

    • @jaxonwater5913
      @jaxonwater5913 3 ปีที่แล้ว +2

      My dad helps me a lot with my project car as well, it’s a really good experience

    • @VinnyMartello
      @VinnyMartello 3 ปีที่แล้ว

      This is a really wholesome comment. Good for you buddy!!!

  • @SootHead
    @SootHead 3 ปีที่แล้ว +49

    That zoom thru the con rod big ends was trippy! Always an anticipatory pleasure to see what tricks the video guy(s) will show us in an episode.

    • @PigglyWigglyDeluxe
      @PigglyWigglyDeluxe 3 ปีที่แล้ว

      You should see the camera that can capture those shots, it’s a funky looking thing lol

    • @scotte2815
      @scotte2815 3 ปีที่แล้ว

      AGREED !!

  • @TedSchoenling
    @TedSchoenling 3 ปีที่แล้ว +22

    Love the art added to just tearing down an engine... you folks get it.

  • @diegoramdhani2799
    @diegoramdhani2799 3 ปีที่แล้ว +70

    Just me letting hagerty know i appreciate that they record in 4K

  • @PAUL_K
    @PAUL_K 3 ปีที่แล้ว +1

    FINALLY!!! Cadillac 365!

  • @refiii9499
    @refiii9499 3 ปีที่แล้ว

    That engine is immaculate to start with. Doesn’t get better than that.

  • @arkeyethenoo
    @arkeyethenoo 3 ปีที่แล้ว +9

    The double wrench trick 😂 love it..

  • @acerlogic1869
    @acerlogic1869 3 ปีที่แล้ว +1

    Notice! All hand tools, no impacts during tare down. The sign of a true Mechanic. Its all about the feel.

  • @erat91
    @erat91 3 ปีที่แล้ว +9

    I know i've said this before, and i'm not sure who will read it. The production levels on these videos is best on youtube, hands down. The editing and videography are just unlike anything else, even better than stuff you see on TV. Keep it up!

  • @victoroneill7924
    @victoroneill7924 3 ปีที่แล้ว +2

    I like the intake port angle! This is the first Cadillac engine I've ever seen. Very interesting design.

  • @creativerecycling
    @creativerecycling 3 ปีที่แล้ว +5

    I love tearing old engines down! Just seeing how things were done and extrapolating why. Every day is an education.

  • @SteveLowe65
    @SteveLowe65 3 ปีที่แล้ว

    That rolling shot through the rod big ends is legendary. Also, the bearings in that thing look fantastic, especially given the condition of the oil and sludge.

  • @johnfranklin5277
    @johnfranklin5277 3 ปีที่แล้ว

    I had the 365 in my 58 cadillac rebuilt in 2011. 1st rebuild. Parents bought it in 1960. They did a good job, running beautifully. Tons of blow by was the reason. Has NONE NOW!!LOL 😊

  • @Beejmiles
    @Beejmiles 3 ปีที่แล้ว +7

    May I suggest the International Harvester 345 for your next "unique" motor tear-down and build. Scout II's are gaining in popularity, as are most 4x4's from the late 60's and early 70's. Would be fun to see you guys do a 1976 US Ski Team tribute Scout II (which is what I hope to day when I'm finished with my current Scout II project).

  • @shawnmrfixitlee6478
    @shawnmrfixitlee6478 3 ปีที่แล้ว

    I did a quick search and pistons and whole rebuild kits in the early engines are easy to get . ENJOYED !!

  • @kwstasdol
    @kwstasdol 3 ปีที่แล้ว +6

    Perfect photography and scenes! Greeting from Greece!

  • @maldo72
    @maldo72 3 ปีที่แล้ว

    What blows me away is the lighting .... whomever does the light on these video shoots ... two thumbs up

  • @Oldgunguy62
    @Oldgunguy62 3 ปีที่แล้ว +2

    Always a pleasure watching a master at work the redline series are my favorites

  • @moparedtn
    @moparedtn 3 ปีที่แล้ว +15

    Davin: "Get out in the shop. Get your work done. There's a beautiful day waiting on you..."
    Me: Looks out window at the current "nor'easter" passing through...
    Hey, I'm with ya Davin - in spirit, anyways. :-)
    -Ed on the Ridge

  • @giancarlopbranco
    @giancarlopbranco 3 ปีที่แล้ว +1

    It's just magic! Congrats!! 👏🏻👏🏻👏🏻👏🏻

  • @andymehl7994
    @andymehl7994 3 ปีที่แล้ว +1

    Love watching these. Please please please get rid of that alternator and go back to the generator. Or at least get one of the alternators that looks like a generator.

  • @mikebaird3867
    @mikebaird3867 3 ปีที่แล้ว

    I like the ending encouraging to get guys out to the shop. Thanks

  • @MCW1955
    @MCW1955 3 ปีที่แล้ว

    Standing in front of the camera while working and explaining what's going on is difficult, and you make it look easy. Great job!! Also, camera equipment in some shots is nice to see. Even camera man's shoes is genius. Thanks.

  • @montebarnes8043
    @montebarnes8043 3 ปีที่แล้ว +1

    Love to see someone building up an odd ball engine eventually I want to rebuild my 305 v6 in my gmc

    • @andymehl7994
      @andymehl7994 3 ปีที่แล้ว

      Do it. The Jimmy V-6s are torque monsters.

  • @Tuilaione
    @Tuilaione 3 ปีที่แล้ว +2

    Love the breakdown... WOW... thanks Davin

  • @LuisPerez-el1zn
    @LuisPerez-el1zn 3 ปีที่แล้ว

    Snap on should sponsor Davin with it's cordless power tools.

  • @sidrt4648
    @sidrt4648 3 ปีที่แล้ว +3

    They were right about "more Davin" awesome

  • @dmitryaz123
    @dmitryaz123 3 ปีที่แล้ว +1

    Enjoyed it) That "go get your work done" magic at some point will definitely make me a proud owner of my own not-yet-existing shop)) Thanks Davin! Keep going)

  • @mikewong5888
    @mikewong5888 3 ปีที่แล้ว +1

    Nice photography and lighting!

  • @jeffplant3
    @jeffplant3 3 ปีที่แล้ว +1

    Great start! Always something to learn Davin! Look forward to what's next!

  • @1spaghetti32
    @1spaghetti32 3 ปีที่แล้ว

    Just me letting Hagerty know that I appreciate them let me watch Davin rebuild with such class and awesomeness.

  • @lsobrinho
    @lsobrinho 3 ปีที่แล้ว

    There is so much buildup that the internal parts of the engine look like BRASS.

  • @stardog16
    @stardog16 3 ปีที่แล้ว +1

    Very Cool Video! Happy moment whenever a new Redline video pops up in the feed. Good work Y'all!

  • @bullast2046
    @bullast2046 3 ปีที่แล้ว

    YEA MAN! Not many know the two wrench method to break bolts free

  • @larrybair8074
    @larrybair8074 3 ปีที่แล้ว

    Love that Caddy engine. I had a 59 while in college.

  • @PAVLOAXIS
    @PAVLOAXIS 3 ปีที่แล้ว

    Привіт! Завжди цікаво дивитись ваші відео, лайк!

  • @KYPresto
    @KYPresto 3 ปีที่แล้ว +1

    Wow. That was entertaining. Great content. Great camera work. Thanks for doing this. Keep 'em coming.

  • @keithjones8659
    @keithjones8659 3 ปีที่แล้ว

    Love the videography. Best of any automotive channel.

  • @beboboymann3823
    @beboboymann3823 3 ปีที่แล้ว

    Great video talents and engaging narrative. You guys never fail to entertain and teach us. I love the old stuff.

  • @rcadd1ct
    @rcadd1ct 3 ปีที่แล้ว

    Measured for driveshaft length before I took the transmission out of my basket case project. Engine has set rebuilt for 20 years. Time to pull it apart and fix all the fixes that we have learned in 20 yrs.

  • @howardnielsen6220
    @howardnielsen6220 3 ปีที่แล้ว

    Thank You. La Pine Oregon

  • @Duncanz28
    @Duncanz28 3 ปีที่แล้ว

    Great work-very interesting. At 13:00 Dave mentions that the lifters looked like 50k miles or so of wear. What he did not see but the camera did was that the bottom of the lifter was worn badly concave. A new lifter's bottom is slightly convex so the mileage looks more like 150K!

  • @cincinnatibob37
    @cincinnatibob37 3 ปีที่แล้ว

    If you like disassembly, (I mentioned on another of your vids) A guy that publishes under "I Do Cars", well done and entertaining. He buys engines, usually blown, and disassembles for parting out items for sale. Usually later model engines.

  • @miketeeveedub5779
    @miketeeveedub5779 3 ปีที่แล้ว +5

    I always thought Chevy pioneered the cross-flow cooling system with the aluminum-headed LT1 in the 5 gen Corvette. Nice to see Cadillac doing this back in the 50s.

    • @geoffmooregm
      @geoffmooregm 3 ปีที่แล้ว

      I don't think this engine is. It is a traditional coolant path, as far as I know, where the coolant enters the block and exits the heads. It is just that the crossover is bolted on the front of the head instead of through the intake.
      Some early Pontiac V8 engines had reverse flow but they changed course and went to more traditional flow later on. Reverse flow needs a system to manage vapor buildup where traditional flow will simply let the vapor out through the thermostat and it can rise to the top of the radiator and be burped out to the overflow tank.

    • @miketeeveedub5779
      @miketeeveedub5779 3 ปีที่แล้ว

      @@geoffmooregm - after reviewing the video I think you're right. The coolant passages are exiting the front of the cylinder head as opposed to the lifter/intake valley. Guess Cadillac did this to partially separate the intake from the cooling system to minimize heat retention. Anyways - good eye!

  • @hydroy1
    @hydroy1 3 ปีที่แล้ว +1

    Davin , You missed a very critical operation on this tear down told to me by Smokey Yunick decades ago. Always check side clearance of each pair of rods before you remove the rod caps and make a paper trail as you need to match ware of each rod bearing to the rod clearance to see if there might be a restriction from to tight a rod clearance. Also if you do loosen the side clearance on the rods it can allow more cool oil to get into the bearings even with a stock GM 35 pound oil pump. I always replace my oil pumps with a Mellings high pressure/ standard volume pump with all BOP motors and open up the side clearance from factory set up of around .004 to .006 per pair to .010 to .012 after cheeking the rods on a surface grinder as it could free up a few hp ! , Ask Mike Thirlby about this.

  • @DMR67442
    @DMR67442 3 ปีที่แล้ว

    Years ago I tore down a 54 Cadillac V8. And while doing so I noticed so many similarities to a small block Chevy. If you look at the timing cover and where that water pump bolts on it looks like Chevrolet. And the reason is when the engineers that came over from Cadillac to Chevrolet to design the new V8 the pattern is much after the 49 Cadillac V8. That 54 engine and possibly this one I haven’t got that far in the video has 17 bolts for the cylinder head. Eight on the bottom five in the middle and four on top. This engine is a little bit of an upgrade from the 54. But for certain if you read about the history of the Chevrolet engine quite a few of those engineers came from Cadillac

  • @tedspeed3338
    @tedspeed3338 ปีที่แล้ว

    He said traditional oil pump, lol. Just poking fun. The lower part of the oil pump was a vacuum pump that fed the vacuum wiper system, so you could go full throttle up a hill in the rain and still have vacuum to run the wipers.

  • @Audion
    @Audion 3 ปีที่แล้ว

    Those shop cart/tables are great.

  • @AdeReeves
    @AdeReeves 3 ปีที่แล้ว +1

    Nice tear down.. takes me back :)

  • @ericsanford5639
    @ericsanford5639 3 ปีที่แล้ว

    that water pump's crazy!

  • @JS-oy6nn
    @JS-oy6nn 3 ปีที่แล้ว

    Where he said “vise grips on the crank” ???
    Pipe wrench would be my guess.🤨
    What a fantastic job he must have??
    Big 👍🏻👍🏻👍🏻 great video!!!

  • @graymodeler
    @graymodeler 3 ปีที่แล้ว

    Interesting about the hoses going aft. My 1954 Buick had a back seat seat heater with hoses run to it. There was a separate blower switch as well.

  • @paintnamer6403
    @paintnamer6403 3 ปีที่แล้ว

    Many retired people had a Cadillac and they would go to the grocery store and maybe on a trip to the airport so miles put on them were short and sludge building. I have seen that in a town with a retirement community any car(30 years ago) driven like that needs an ATF treatment before the oil change and that just quiets the lifters. Then their hippy kid, or not, would get it!

  • @vettekid3326
    @vettekid3326 3 ปีที่แล้ว

    Back in the early 1980's I tore down a 1976 Pontiac 350 for a lifter noise.The owner bragged about owning it from new and changing the oil every 2- 3k miles but he had use Sears brand oil straight weight non detergent oil and when I opened it up @ 80K it was the worst engine I had ever seen for sludge build up and had that hard oil burnt on coke buildup on the bottom side of the intake manifold where the exhaust crossover was. The quality of the oil used makes a big difference in how clean an engine stays, probably as much as how often you change it.

  • @lot27a
    @lot27a 3 ปีที่แล้ว

    I guess you'll be rebuilding the top end given those odd water channels. Don't think I've ever seen that before. Another very interesting build! Glued as usual...

  • @streetstock72
    @streetstock72 3 ปีที่แล้ว

    I had a 23T pickup back in the 70’s with a 56 Caddy 365 2 4 barrels and a 4 speed automatic,l through a rod and still didn’t destroy the block but for a young postman it cost me big bucks in those days like 76 roughly ...

  • @ronlynch7744
    @ronlynch7744 3 ปีที่แล้ว

    Awesome tear down. Cool stuff.

  • @brucebello9892
    @brucebello9892 3 ปีที่แล้ว

    Great start!

  • @mschiffel1
    @mschiffel1 3 ปีที่แล้ว +4

    I'm surprised that Cadillac had a bypass type oil filter in 1957 when other manufacturers had spin on disposable oil filter elements. And the sludge in the engine might not be from any lack of servicing, but due to the oil quality back in the late 1950s. Motor oil has come a long way since then.

    • @charlesdalton985
      @charlesdalton985 3 ปีที่แล้ว

      I was just about to write the same. I recall the early 60s as the arrival time for detergent oils.

    • @hawkdsl
      @hawkdsl 3 ปีที่แล้ว +3

      Very true.. oil now is rather incredible.. While gas on the other hand...

    • @mschiffel1
      @mschiffel1 3 ปีที่แล้ว +1

      @@hawkdsl Exactly.

  • @happyowner9347
    @happyowner9347 3 ปีที่แล้ว

    My wife says I watch your vid with open mouth. I do, And I really like it.

  • @jjcadi3738
    @jjcadi3738 3 ปีที่แล้ว

    Many thanks for share. 👏👏👏👏

  • @Trlthericklang
    @Trlthericklang 3 ปีที่แล้ว +3

    Can someone explain why I love seeing a timelapse being filmed with a timelapse.

  • @mrpartridge8765
    @mrpartridge8765 3 ปีที่แล้ว

    I wish it was a beautiful day lol I'm in Maine right now and its a blizzard outside. I gotta wait to get my stuff done.

  • @Wrenchen-with-Darren
    @Wrenchen-with-Darren 3 ปีที่แล้ว

    Cool. Good platform to start with.

  • @reynandikadarmawan5803
    @reynandikadarmawan5803 3 ปีที่แล้ว

    This a great engine sir.

  • @markvarona3429
    @markvarona3429 3 ปีที่แล้ว

    Hagerty Teardown Video = clicking the like button before the play button.

  • @coryjones9573
    @coryjones9573 3 ปีที่แล้ว

    Great show!

  • @40d1
    @40d1 3 ปีที่แล้ว

    07:20 love it

  • @SpatialDragon
    @SpatialDragon 3 ปีที่แล้ว

    Davin is like our own version of Punxsutawney Phil, he sees his own shadow in the middle of a blizzard, except he calls it Spring and not 6 more weeks of Winter. Optimistic? Sure, but why not? Yet he already knows he needs new pistons, without and holes in the pistons or heavy gouges or rust... Let's hotrod this Caddy and put in a bigger cam.

  • @kylecorcoran8028
    @kylecorcoran8028 3 ปีที่แล้ว

    Speedway motor carries classic caddy stuff

  • @MrCunningham4
    @MrCunningham4 3 ปีที่แล้ว

    Can't wait to see the time lapse in a few months :D

  • @catfishgray3696
    @catfishgray3696 3 ปีที่แล้ว

    GREAT JOB, GREAT VIDEO, [ NOW LET'S GO TO WORK... ]

  • @dennislamb5749
    @dennislamb5749 3 ปีที่แล้ว

    Thank you for a great video. I have found the crusty build up in older engines related to ring sealing. The combustion going past the rings causes heat to increase in the crankcase. The heat and the old oil with acids forms sand like carbon in the crankcase.

  • @sponsored_hobbies8233
    @sponsored_hobbies8233 3 ปีที่แล้ว

    Amazing stuff guys.

  • @billbeyer657
    @billbeyer657 3 ปีที่แล้ว

    Speedway Motors has the pistons & rings you need but they get them from Egge which has the entire overhaul kit

  • @jeffcolt9185
    @jeffcolt9185 3 ปีที่แล้ว

    Wanna see a 58 chev 348 tear down, put back together and Dynoed :))

  • @VinnyMartello
    @VinnyMartello 3 ปีที่แล้ว +1

    I really regret letting go of my 472 Caddy. I wish I had kept it.

  • @mattgraham1983
    @mattgraham1983 3 ปีที่แล้ว

    Freaking love this shiz 👍👍👍👍 yeah let's get it on.
    Oh the amount of times parts have been ordered only to find it's over sized or you simply cant get them (location, availability etc etc) geez I love these rebuilds👍

  • @johnfranklin5277
    @johnfranklin5277 3 ปีที่แล้ว

    Complete engine rebuild kits are available from old car specially companies. No problem.

  • @parsaparsamehr9899
    @parsaparsamehr9899 3 ปีที่แล้ว

    Thank you

  • @pinsandscrews6459
    @pinsandscrews6459 3 ปีที่แล้ว +1

    I can’t help but also wonder if the sludge may also be due to the older Non-detergent oils. I think sometimes we forget that the older oils were good, but our chemical work has really come along way from where we were.

  • @beantv1792
    @beantv1792 3 ปีที่แล้ว

    legend 👌👌👌

  • @charlieritchel1492
    @charlieritchel1492 3 ปีที่แล้ว

    Man its good to see you're still around to drink coffee and work on cars. Lol I thought you went on to the upper room.

  • @alexyo3927
    @alexyo3927 3 ปีที่แล้ว

    Haven't watched yet but can't wait to see

  • @brianbrusseau3233
    @brianbrusseau3233 3 ปีที่แล้ว

    The black fouled plugs are a result of an overly rich mixture. If the plugs are actually oil fouled, then this is a clear indication of worn valve guides and or valve seals. Worn oil control rings will produce the same oil fouling on the plug as well. In any event, a complete rebuild is necessary.

  • @JDWorkshop-wn9tt
    @JDWorkshop-wn9tt 3 ปีที่แล้ว

    Cool new build!

  • @nickfrangos3665
    @nickfrangos3665 3 ปีที่แล้ว

    Speedway Motors has pistons, rings, and bearings for the 365!

  • @connorssmallengines6663
    @connorssmallengines6663 3 ปีที่แล้ว +23

    “It’s better than everything in the middle and the end”
    Really, it’s better than first startup?

    • @hydroy1
      @hydroy1 3 ปีที่แล้ว +6

      Yeah , this is more fun because it costs no money and tells us what your starting with plus you still have lunch money in your pocket as when the motor is finished, your eating old bean soup for weeks ! lol . Been there done that .

    • @sethdunlap7009
      @sethdunlap7009 3 ปีที่แล้ว +7

      "first start up", oh, you mean the unwanted hour spent finding what ground you forgot to hook-up or is too corroded to work/ the inevitable distributor being 180° off (so you think) and then changing it back when you realize you shouldn't have second guessed yourself. The 5 cent o-ring that you never knew existed, that is keeping something from doing it's job. The battery that tried it's best all dozen attempts to turn the prick over...

    • @connorssmallengines6663
      @connorssmallengines6663 3 ปีที่แล้ว

      @@sethdunlap7009 yes

    • @RobertSmith-le8wp
      @RobertSmith-le8wp 3 ปีที่แล้ว +1

      @@sethdunlap7009 I see you’ve done this before. I’ll add. Finishing up and finding a bolt or 2 and wondering where it was supposed to go and second guessing working until 3am on no sleep

    • @skillsinc2390
      @skillsinc2390 3 ปีที่แล้ว

      "First start up", on the relieve of anxiety you didn't mess something up. Dude is that a oil leak?

  • @РусланКазахстан-о7з
    @РусланКазахстан-о7з 3 ปีที่แล้ว

    Verry good! Intresting

  • @fairlaner69
    @fairlaner69 3 ปีที่แล้ว

    Rockauto still lists piston rings for the 365

  • @georgeevankovich3489
    @georgeevankovich3489 3 ปีที่แล้ว

    Love these 🎥

  • @johnleinen9409
    @johnleinen9409 3 ปีที่แล้ว

    EGGE MACHINE out here in Santafesprings Ca. They make pistons rings bearings etc. But you probably new that already.

  • @maldo72
    @maldo72 3 ปีที่แล้ว

    cool shot were the camera goes through the rods 12:22

  • @joe6096
    @joe6096 3 ปีที่แล้ว +1

    Hope you replace the modern alternator with a 1957-era generator for proper period-correct look and operation.

  • @sethbarnes7608
    @sethbarnes7608 3 ปีที่แล้ว

    For pistons and rings, try Egge Machine Co. Or maybe Sealed Power. Also, there's a place called Caddy Daddy I've gotten parts from as well

  • @ВладиславСалимон-ж5в
    @ВладиславСалимон-ж5в 3 ปีที่แล้ว

    You are the Best.

  • @TBendez
    @TBendez 3 ปีที่แล้ว

    So glad you're back at it! It's just a feeling but this caddy 365 wasn't exactly dated by the time it came out right? They seem to have been on top of their game back then.

  • @deddycanon8527
    @deddycanon8527 3 ปีที่แล้ว +2

    Hii .. i'm from indonesia i love hagerty channel .. I hope subtitle for indo 😭🙏

  • @nome5184
    @nome5184 3 ปีที่แล้ว

    Davin you don't look good. Hope everything is ok with your health. Video is cool and entertaining as usual. Keep up the good work.

  • @rdyer8764
    @rdyer8764 3 ปีที่แล้ว

    In my lifetime I've only disassembled and rebuilt a couple engines. My question is, "Where do the inevitable 'extra bolts' come from when the motor is put back together?"