Bus Bar Protection | Bus Zone and Check Zone in Bus Bar Protection | Bus Zone | Check Zone

Speaker information: Pankaj Kumar Jha
Manager, Power Grid Corporation of India Ltd.
(Power System Engineer with more than Ten (10) years of industrial experiences.)
The fundamental concepts of bus bar protection will be discussed in this series of session. In this series we will discuss about the basic concepts of Bus Bar Protection. Difference Between High Impedance and Low Impedance Bus Bar Differential Protection. The concept of CT saturation and its effect on the performance of Bus Bar Differential Protection. High impedance bus bar differential protection calculations. Centralized and Decentralized bus bar protection schemes. Concepts of Bus Zone and Check Zone in case of bus bar differential protection schemes. At the end of this series you will learn all the fundamental concepts related with bus bar differential protection. All the sessions will be in Hindi as well as English and you may watch these sessions as per your convenience.
For better understanding of the concepts explained in this session, it is desirable that following sessions must be watched:
1. Bus Bar Protection | Concepts and Applications of High Impedance Bus Bar Differential Protection |
• Bus Bar Protection | C...
2. CT Saturation and its Effects on Bus Bar Protection | Bus Bar Protection | CT Saturation |
• CT Saturation and its ...
3. Bus Bar Protection | Bus Bar Differential Protection | High Impedance Bus Bar Differential | Part-1
• Bus Bar Protection | B...
4. Bus Bar Switching Schemes || Bus switching schemes || Bus Bar arrangements ||
• Bus Bar Switching Sche...
5. CT POLARITY || WHY CT STAR POINT IS ALWAYS FORMED TOWARDS PROTECTED OBJECT SIDE || PART-2.
• CT POLARITY || WHY CT ...
An incredible amount of time and effort is needed to develop high-quality video tutorials. Each video takes approximately 6-8 hours to complete which includes learning the concept myself, brainstorming creative ways to teach and explain the concepts, creating the presentations (if delivered through PPT mode), Setup of analysis software, video recording, and editing. Your support truly makes all the difference. So, Please like👍🏻, comment and share this video with your friends and keep watching this channel for more such videos in future.
#Lightningminds #pankajkumarjha

[@sachchidanandpandey1881]

Good Explaination

[@LIGHTNINGMINDS_PANKAJKUMARJHA]

Thank You

[@surendrakverma555]

Excellent lecture Sir. Thanks 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

[@suremanverma8308]

Thank you for such knowledgeable session. Please cover main zone ,check zone concepts in view of DMT schemes including transfer bus Coupler for distributed Bus bar protection (preferable GE CU and Pu) where zone 1, 2,3 and check zones are involved.

[@sanjeevrana8317]

Excellent 👌👍. Next video awaited. Thanks

[@LIGHTNINGMINDS_PANKAJKUMARJHA]

Thank your for your valuable feedback.

[@HR-rp8pc]

Thanks सर अच्छे से बताने के लिए।

[@LIGHTNINGMINDS_PANKAJKUMARJHA]

Thank your for your valuable feedback.

[@AmirKhan-jt5bd]

For tripping we need 2 out 2 for reliability but you missed the part when main zone or check zone is out of service and also if ct supervision is unhealthy in main zone or check zone.

[@sanjeevrana8317]

What is mathematical parameters on deciding low or high impedance busbar differential protection

[@rupaliranaleaderdevotee]

14:45 substation blackout

[@sanjeevrana8317]

Keep it up. Thanks

[@LIGHTNINGMINDS_PANKAJKUMARJHA]

Thank your for your valuable feedback.

[@emctab8037]

Sir bus zzone and check zone calculation chahiye.

[@technicalknowledge9093]

How to connect ct for check zone protection

[@mathiyazhaganramalingam2254]

Done