ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2024
- In this video, we install rear turn signals and brake light bulbs that will work for a 2016-2019 Toyota Tacoma. We also install a resistor to fix the hyper flash issue that is caused when the headlights are on and using the rear LED turn signals.
We also show how to connect a resistor to the rear turn signal wires and where to mount the resistor.
Brake Lights & Turn Signal (brighter one)
amzn.to/2TjIxat
Brake Lights & Turn Signal (less bright)
jdmastar.com/product/778/GX-30...
Resistor
amzn.to/2XGo7Xr
#tacomahyperflash #hyperflashfix #LEDresistor
![คุณอาเรียโต๊ะข้างๆ พูดรัสเซียหวานใส่ซะหัวใจจะวาย ตอนที่ 2 [ซับไทย] 【Ani-One Thailand】](http://i.ytimg.com/vi/kbbfYakMY8k/mqdefault.jpg)
Dude literally nobody goes into as much detail as you do in your videos and it’s very much appreciated!
17cementpro thanks man we try our best
I installed today and WOW, what a transformation. I did not add the resistors to the front turns and am not experiencing any hyper flashing. Great MOD and thx again!
Great video, it helped me a lot! I have a factory built 2008 Toyota Tacoma and I recently replaced my headlights with LED bulbs. I was getting the hyper-flashing across both front and rear turn signals. After purchasing LED Load Resistors from Napa Auto Parts and watching your video, the hyper-flashing was fixed to a normal flash. (I thought I was going to need to add resistors to all four corners of turn signals, but I only ended up having to add them to the rear (non LED bulbs; but it corrected the front LED bulbs as well). Thanks again!
LED upgrades looks so good!
Thank you Twonz! Raptor lights work perfect, hoping for some good luck on the H11!
19packers be sure to add your Instagram username or else it won't be entered.
Firstly, I love this channel and it has helped me a lot throughout the years. I wanted to add something that I think might be helpful to some. I followed these instructions to the letter tonight.....but was still getting the hyper-flash. I found that I had to bridge the white/black wire WITH the yellow wire on the driver side and the white/black WITH the blue on the passenger side. The blue and the yellow wires are the ones you're supposed to ignore, per the video. Ones I switched the wires, no more hyper-flash. It may just be my model (2017 Sport), but I thought this might help some that would be scratching their heads when the resistors didn't work. (if someone already pointed this out, I apologize). Thanks for the content, this channel is a must for any Tacoma owner!
Vladymier316 I have exactly what you are talking about. Followed this video to a T and still have hyperflash, but only when the lights are on. Lights off, no issues. What do you mean, "bridge" the wires together...?
@@robertboydston3787 I shouldn't have said "bridge", I meant splice them together. Basically, splice the white/black wire to the yellow wire on the driver side and splice the white/black wire with the blue wire on the passenger side. The ones they say to ignore in the video are the exact ones you're supposed to use. Hopefully that clears it up a little?
Can confirm this was the issue. Its might be only for 2017s. I had this exact issue. No hyper flash unless lowbeams are on. Change where the resistor clips connect based on this comment and it fixed it. I have a 2017 sr5.
Thank you for commenting this on the video! saved me from having to google it and possibly not finding a solution.
Thanks for looking out for your followers on the hyper flash video BIG 👍up.
Going to watch this later when I get time and do this thank you!
Daniel Hannah awesome! 👊🏼
Sweet set up!
Here for the giveaway, stayed for the install videos! Thanks!
Ben Raymond glad it was informative! make sure to follow us on Instagram and add your Instagram username here to be entered.
Taco Twonz following! And Instagram name is benjamin__paul
Great video man! Love the taco its looking great! Keep it up
Mina G thank you!
Thanks for the video now I can get my lights.
David Santos thanks, glad I could help and sorry it took so long to do this
Cool set up
Sick vid!!! Toss a broke dad a set of those H11 led bulbs! Thank you for the opportunity.
eric berry thanks! be sure to add your Instagram username or else it won't be entered.
I need these!
Just found you guys, just bought a Tacoma !
CenterIceTV awesome! We try to do giveaways often so make an Instagram if you don't have one and follow us and comment your Instagram username here
Hey noticed at :35 you say you to remove both of those lower 10mm bolts. Only need to remove the lower one of those 2 . The other isn’t attached to the tail light assy. So to clarify, remove one bolt at the top and one at the bottom, leave the middle alone.
Got hooked on your vids after my bf got a Tacoma. Hope I can win him this giveaway to replace his currently crusty headlights 🤞🏽
I installed the JDM bulbs with suggested resistors (front/rear turn & stop) back in Feb. No issues until driving home tonight. With headlights on I’m experiencing hyper flash. Any thoughts?
Do i only need resistors on the back or in the front if I install LEDs there too?
Thanks for the video, bought led bulbs for my tacoma tail lights which did not have any instructions on how to wire them. I used a meter and thought i had the right wire, apparently not. The company i bought them from still has not called me, my first call to them was almost two weeks ago. Thanks again.
Good luck!!!! 🍀
Any issues caused by heat from the resistor? I noticed where you mounted it. I don’t believe that to be metal, but a hard plastic.
If you have aftermarket LED bulbs in front and rear with one resister in the rear like you demonstrated, will that work for both front and rear ?
Thanks a lot and this is such a good video I’m going to be sure to subscribe! But I’m curious, if I am just looking to replace my high and low beams only on my 2019 Tacoma, will I still need a resistor? Also if that is the case, do you have a video that shows you how to install a resistor on the headlights?
I upgraded my lowbeams for my 16 tacoma a few years ago been meaning to get around to high beams but I don't use highs nearly enough to spend money on them right now. Either way to answer your question NO at least I didn't have to for the low beams I'd assume the same would go for the highs. I believe resistors are only needed when diving into led turn signals but for just the headlights I haven't has any issues for the past 2 years. BTW the led headlights I bought were auxbeam h11s from amazon.
Im lost, im sorry i might have missed it, but did u show where the tail lights are hyper flashing? Or just went wit the resistors just in case they did hyperflash?
Have you had any issue with blinker going out after install of the this?
Just entered🤞🏼🤞🏼Need to do some upgrades to my Taco
Just bought my 2017 Tacoma TRD Off-Road. Here for the giveaway !
ethan stout be sure to add your Instagram username or else it won't be entered.
Great video just 1 question your not having any problems with hyperflashing with your headlights on right? I’m having that problem but I also saw on Tacomaworld that they spliced the yellow wire instead of the green one? If your not having any problems ill just follow your lead thanks!
Richard Lee I originally had problems with the headlights on, no longer though after the resistor. The yellow on the driver side and the blue on the passenger side I believe connects to the hazards which are pretty much the same thing so which is why the issue is resolved either way
NOW HOW CAN I ORDER THE LIGHTS BULBS AND THE RESISTOR...MY 2020 TACOMA OFF ROAD 4X4 HAVE THE LED HEAD LIGHTS FOG AND SEQUENCIAL FRONT TURN SIGNAL..STILL NEED TO PUT A RESISTOR EN THE REAR???
@jameskaimi Always great content! Been following you awhile on both social media’s! Loving the truck brotha
Will you guys offer anything for the Tundra in the future? Really like those grille lights. Nice truck, love the videos! 😁🤙🏽🤙🏽
Rogue Hawaiian funny that you ask because we are actually working on those right now. Will definitely upload a video and follow us on Instagram for early announcements @runnin4tacos
Taco Twonz nice! 👌👌
What’s up dude. Just installed mine today with resistors. Any issues with using them so far? Any overheating issues?
You make it look so easy with the detailed instructions on the installation. It makes it easier for me to do these things and spend money. Have you ever had any issues with splicers not providing the current? And can you please provide the link for the lights?
Jose Recoder I'm glad our video helps! Except the part about spending money 😂 sorry about that part. I haven't had issues with the splicers at all. The links to the bulbs are in the description of this video, I'll always put them in the description for every video in case you would like to use the same products. Thanks for your feedback!
Taco Twonz I’m looking for the splicers online. Not sure if I’m looking at the right ones...can you suggest what I should look for specifically when searching?
Jose Recoder depends what size you want. If the gauge you are using it on is a 18 then get the 18 gauge splice. It should be red. The blue one is for a 16 gauge I believe
Nice!
Would this work on 2017 Tacoma SR5? Mine has the amber DRLs.
Hi there great video! Question, I just purchased the same LED's and I bought two resisters for the rear blinkers. Do I need resisters for the front as well, judging by your video it doesn't look like I do? Thanks!
@Project Car Junkie yea you will need resisters
I need a set of the head lights. Big fan
I’m new to the Tacoma world
2001 C5 Corvette. i replaced the front bulbs with LED's because the heat was melting the housings. After replacing all four rear 3056's w/ LED's, I got hyperflash. I installed the relay
and all is well except... When the tail lights are on the brake lights work fine, yet when
I use the turn signals the rears light up but don't flash and the fronts do!?? Ideas?
VERY GOOD VIDEO LIKE BECAUSE YOU JUST TALK THE NECESARY
Do the JDM 1260’s fit the front turn conversion?
I cannot get them to work properly. I bought all of the same stuff as you and the resistors get warm which tell they're working. I dont understand please give advice
Good luck all!!
Did you have to put a resistor on the front as well as the rear?
Did you have to use Resistors on Front Blinkers also ??
I try to do this about a year ago and my truck when in to limp mode but I didn't have the resistors is that why
Did you do amber or red GX-3020’s... ?my eyes are playing tricks on me lol
Great video especially for the noobs to all this.👍
On my 2022, the yellow and blue are power for turn signals. I ran a 6 ohm resistor parallel between yellow and white (left) and blue and white (right). The dark green wire is power for the running lights
In for the giveaway. Keep up the Taco content!
Chris Fisher be sure to add your Instagram username or else it won't be entered.
Taco Twonz you got it - @hichrisfiaher
Need to upgrade those low beams!
@tacomahub Sub’d, liked! Thanks for the Op! Can’t wait for those new grille lights to drop also!!!💪🏽
Hey guys good job! Entering the giveaway
Danny Gritti make sure to add your Instagram username
@ur_boy_blue
Hermano tengo que obligado poner el resistor? Para que funcione el Led de freno y led de cruce?
Awesome! What size r ur tires?
So I purchased all the same bulb except I used the same bulb for both brake and taillight. Watched your video installed the resistors. Hyper flash gone during day but when headlights come on they start hyper flashing again.
I have the led for the headlight turn signal as well. Do you need resistors for those too?
First real upgrade for my taco? You decide.
Hell yeah Colorado!! What size are the reverse lights bulbs for my Taco?
Elmer Gutierrez I forget. I'll get it on my Amazon link
I want to upgrade my 2019 Tacoma bulbs. Good luck everyone.
Juan Garcia be sure to add your Instagram username or else it won't be entered.
I NEED these lights!
Zach Willians make sure to add your Instagram
Taco Twonz I sure did! @zwilliams175 commented and liked as well!
Omgggg!!!! I need this!
Bee Rapalo be sure to add your Instagram username or else it won't be entered.
Taco Twonz yessss!!! Belle.vie.b 💪
If you switch front signal and back signal to LED, do you need a resistor for both front and back? Or just add a resistor to one end?
All 4 might need a resistor, for us we only needed it in the rear.
I lovvvvve your taco
So you only need one resistor for each side even if you have the front led turn signal and the rear turn signal
Love the videos keep up the good work! Hope I win the giveaway 🤣
Just wondering is there any Blindspot sensors located in the rear light ????
Diaz * I don't think so
Here for the giveaway!
Hyper flash fixed!
Did you install resistors on front as well for the turn signals, or just rear and that fixes both front and rear led hyper flash?
You may need to, we didn't
On 2022 TRD off road is white black with yellow driver side and white black with blue on passenger side
What led reverse light are you using? & you said you’d put a link to both led brake/turn signal lights you use in the description. I only see one.
Kevin Vyskocil I am currently using Philips reverse lights but am switching to JDM ASTAR because I want it brighter. The other signal bulbs is on their actual website but I can include it, one sec
Taco Twonz sweet! Thanks
Hi, I followed everything you did on installing the led turn signal and the resistors but still have hyper flash. Any suggestions will help.
Same problem with mine, u fixed it already?
@@junbenito8623 same here as well. I believe they are the same set of wires, and used the recommended resistors. Any luck?
I did connect the black and white wire with yellow/ blue and switch the headlights on all the time.
I was able to fix this by attaching the connection from the black/white to the yellow or blue wire and leave the green out of it.
@@doublehelix457 100% correct, thank you. I just changed my 2018 toyota tacoma to LEDs.
Update: you have no turn signal with the lights off. So does anyone have a fix for that?
Update: They make a plug kit with the resistors built in and there's no splicing your wires. 2 x 7443 7444 Load Resistor Fix Hyper Flash For Switchback LED Turn Signal Light
Is the quality of light output the same doing this process as opposed to just buying a plug and play type of resistor?
I am not sure, it would all come down to light output on both I guess.
Do you have to replace both the turn signal bulb and the brake light bulb? Can you just install the brake light LED only? If you just install the brake light LED do you still need to use the resistor? If you do, how do you install the resistor for the brake light if it is needed?
You can replace whichever bulb you want, no need to do all of them. There are videos on how to install resistors on TH-cam, we don't have one unfortunately
So do I need Resistor for every led bulb? Or just one for blue and yellow bulbs? Thanks
Most likely just the rear but some others have needed it for the front too
JFYI - the wiring instructions may be incorrect. I have a 2020 and I had to bridge yellow to white/black (driver side) and blue to white/black (pass side).
Is the resistor reversible?
Do yo have to got a resistor for the front signals too?
HONDA E85 PONCE we didn't need it
Thanks for the video! Will the front turn signals need to be changed at the same time as the rear? Will the front require a resistor also? Thanks
Michael Steele nope! It won't need to be changed at the same time. The front won't need a resistor at all.
@@Runnin4Tacos So- I have 2 Led bulbs for the front turn signals that hyper-flash, if I install the resistors for the rear, will I not need to install 2 resistors for the front?
Kalman Zsamboki Jr. Good question, I don't think you will need it for the front once you have the rear resistors in. The reason why I think that is because after installing only 1 resistor to the rear turn signal, all of my hyper flash issues were fixed. So I didn't to use both resistors in the rear. I hope that helps
@@Runnin4Tacos I will try that. Thank you!
So you only have 1 resistor in the rear lights? I have the resistors on order that would be great if I only have to install 1 thanks bro!
Woahitslogan good video bro!
Could I get help with the front LED turn signal resistor installation please? I need to know which wires on driver and passenger side do I tap into.
There should be only two wires in front
@@Runnin4Tacos There is 3 wires in the front of mine, same as the rear lights.
yes, it is the yellow on r/h side and blue on L/h side, both with the black and white wires.
sorry, or the other way around.
So you only need the resistor in the rear for both the front and back turn signal to work properly?
Correct
Yo yo I need some of those H11’s
Those resistor gets so hot is that ok??
How about front turn signal? Does it need resistor as well or just rear only?
By the way, I ordered interior LED upgrade for my Tacoma, you shipped same day, what a service!
Thanks
It is kind of hard to say, The hyperflash occurs for any sequence of LED add on. So you kind of have to see which LED the truck is picky about and play with it from there.
I have the same setup: truck, front bulbs, rear bulbs and resistors and this didn't work for me. Still getting hyperflashing with headlights on. The only thing I can think of is that I have HID headlights. Should I install resistors on both sides in the rear?
MatthieuS24 yeah definitely install the resistor in the rear to see if it fixes the issue. Your HIDs shouldn't cause this issue. Try a resistor in both rear signals and let me know
Taco Twonz Resistor on both rears and I still have hyper flashing with headlights on. I’m at a loss.
Update: No hyper flashing when truck is running, only when in accessory mode. Did I miss this part? Otherwise try it on your truck you may still get it with truck off.
MatthieuS24 that's strange, I do not have this issue. I used the signals with the car off in the video actually and nothing. Try putting your stock front bulbs in and see if it's normal. If it is you will have to install resistors in the front signals as well. Kind of a pain but it's that or don't use your signals when your car isn't off, most of us don't anyways
How many resistors do I need bro? Lmk asap pls 🙏🏽
Commented, followed, mods in work on my 5th Gen Trail. Keep up the hard work boys #Salsa_pearl_trail
John Pater nice! Our next giveaway might be a Pro grille for your runner
Hi, Amazon sent to me Led lights for turn signal and stop signal ( only for tail) , and sent 4 resistors, is it each resistor for each Led or no resistors for stop Led? Thank you!
Leopold Murashka you won't need resistors for brake lights
Thank you, Sir!@@Runnin4Tacos
I love r4t and I love this video. Only thing is that the resistor worked only when I tied into the black/white and blue or yellow and left the ground off. Otherwise thanks for this
So by adding the resistors in the back does that correct the hyper flash in the front as well if replaced with led’s ? Or do you add resistors in the front as well?
Ever get this figured out? I swapped out my taillights for some leds I’m getting hyper flashing. I bought some Sylvania resistors that I plan on installing this weekend. But I’m also planning on installing my led headlights this weekend and wondering if I need to add resistors to them as well.
@@brimi23 I actually replaced the blinker relay with a aftermarket one it takes care of the hyper flash front and rear relay sits inside the cab behind the fuse panel box not sure if that’s what it’s called I’m calling it a relay
@@johnnyarroyo5697 Is this on a Tacoma!? I’ve read that 3rd gen tacomas don’t have that flasher relay? I’ll have to look into that
@@brimi23 yes my Tacoma is a 2009 the flasher relay I purchased from Amazon is smart tap cf18 flasher relay not sure if it’ll work for you but good luck bud hope you find a solution
@@johnnyarroyo5697 ah yeah, I haven’t actually looked yet but I’m pretty sure I don’t have the option to swap the flasher relay. I really appreciate you replying!
Thanks for the video
Here for the giveaway
GrecoLoscar be sure to add your Instagram username or else it won't be entered.
My name on instagram is Carlos-PV
Hey guys great video and to let you know I installed the lights with the resistors like you did but when I installed the front signal lights the lights hyper flash ....do you think I need resistors on the front also?
Roque Ramirez yeah most likely. That's odd, mostly everyone else didn't need it but good thing is the front is easier to do
@@Runnin4Tacos do you think you can help me out on which wires to tap in to when putting the resistors.
Roque Ramirez should only have two wires so one end goes on one and the other goes on the other. DM me on Instagram it you get stuck so you can send me a photo
@@Runnin4Tacos ok taco twonz let me try that and I'll get back to you.
@@rogerramirez227 Hey Roque - I'm having the same problem, just curious what ended up fixing it for you if you don't mind sharing
Is the connection is the same for the tacoma 2016?
HONDA E85 PONCE I believe so
Why did you add and what is the function of the resistor ?
Ron Tidwell it fixes hyper flash issues when upgrading to LED bulbs with turn signals
3rd Gen Tacoma TRD sport. Black/white wire to Yellow driver side. Passenger side do blue to black/white.
I did the same install with no issues with hyper flash. I tried to install the brighter ones for the turn signal and ended up with hyper flash when headlights or drive lights are on. Put less bright back in and hyper flash went away. Resistors installed. 2017 limited. Any advice on how to fix this or a solution?
Grant Dickinson resistors won't work with the brighter bulbs? Might need a different resistor if that's the case
Taco Twonz Alright man. Thanks. Keep up with the great videos
So I bought the same resister for my 2019 TRD Pro and I still get hyper flashing. Any suggestions? I watch the video 5 time before I installed both resisters. It works for the hazards when the lights are on but not the turn singles.
Hmm what OHMs resistor did you get?
Taco Twonz I got the same as you. In the video you only show the hazard being tested. Also I was on Tacoma world and explained my problem and it sounds like I did the wrong wires. I was told I needed to do the yellow/ black n white and blue/ black n white not the green with the white n black. Maybe I miss understood your video.
Jabamby Brew a few comments have been telling me the same but for some reason mine works just fine all the time. I think I will switch the wires too to see the difference. Let me know if it fixes your problem
Yeah switching the wires worked. Maybe because I used the same lights for both break and turn singles. I use the JDM that was brighter for both. But I fixed it. Thanks for the video and the response.
Jabamby Brew awesome! Glad it worked