How to make a DIY cross flow fan / Powerful cross flow blower fan / Air conditioner blower fan
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2019
- Homemade Cross Flow Fan DIY
Materials Required:
1. 775 motor x1 - bit.ly/328kBYh
2. 5mm Bearings - ebay.to/2XobaQL
3. Synchronous Wheels - ebay.to/30buhzf
XL10T, Bore: 5mm x1
XL20T, Bore: 5mm x1
4. Timing Belts 80XL - ebay.to/2XJqbkl
5. 775 motor mount brackets x1 - bit.ly/2LAvDzx
6. 90mm PVC End Cap x2
7. 5mm shaft - ebay.to/2XnwS7x
8. 110mm PVC Pipe
9. Wood Piece
Subscribe LahisTech: bit.ly/2JHtlyc
Subscribe for more future creative project videos.
Thank you.
DIY Center Point Finder: • Homemade Circular Cent...
My previous water pumps videos:
1. • How to make a DIY wate...
2. • how to make powerful w...
3. • How to make powerful w...
4. • How to make a powerful... - แนวปฏิบัติและการใช้ชีวิต
Solid yaar is video ko agar 1000 bar like kar pata apne I'd se to me kar deta amazing boss
I love this project, it's executed very well.
This is what i want.
Stuff like this needs a brushless motor,especially since fans are usually run for really long periods of time.
Wow. That was awesome. I'm glad I didn't search for "diy crossflow fan" five days ago.
Cool and very perfectable. Maybe closing more the intake and making the roller tighter.
Nice.
فكرة ممتازة تستحق لايك
excellent maybe a little noisy but strong airflow .just what I need for my new project afterburn wood stove using 100% castable refractory no welding .
I LOVE IT
amazing Guruji amazing bahut Sundar Boss beautiful beautiful.
You should get much better performance if you reverse the pulleys. The motor which can turn at high RPM but with low torque should have the smaller pulley and the blower should have the larger pulley. This kind of motor have poor output when you overload it with a high torque load.
Muy buen video t felicitó muy bien explicado 👍🏽
L
You could mount one of these just outside a house window vawt style so to harvest random wind that flows past, this could redirect wind inside passively, no matter the wind direction outside, no motor needed.
Good job brother
Doing this myself but i used 2 PC fans (12v 1.4amp) 120x120 4" wide (good strong PC fans) facing each other, one just acting as an anchor for the other which is only powered at 5v and it is completely silent.
I glued a pieces of rubber right to the centre of the 2 fans, then fitted the axle that way "Direct Drive" works perfect. At 12v you would probably want it in a heavy casing or fitted tight cause mine nearly took off at first ha plus few fins came lose so need to secure it better
Hai, post the video.
Спасибо , этого видео мне не хватало
this what i been looking for. going to make this diy for my van. thanks man.
Why dont you mount the motor straight to the shaft and remove the belt? Might be quieter.
Thats cool😎
I want the same but with filter and not so noisy
It pretty talented to make a never attempted design that works but also is a final finish product in looks. They usually a proto type attempts model that fine tune then later design for a finish product. So you back ground must have been product design
To get a more compress volume the center is offset same as a snail pattern. Small on intake and larger as it exit, some thing to do with the intake closer so can compress more & exit larger volume w/ longer exit. I am making a blower on part ordered. Now
Какой ещё дизайн нахуй?!
Просто тупо скопирован салонный обдув кондиционера автомобиля. Много ума не надо повторить уже изобретённое.😉😂
great!
Fantastic Video.. Hatts Off
👍👍👍👍👍👍👍 good job
Good 👌
Amazing
pls tell how to make clap sklap alarm/ this video is very nice
Is this A meetgrender?
Nice 👍👌👌👌👌
Mr Soham Gear Thank you
Great
Nice
كم هي درجه البروده
Nice creation. You must be skilled with your work brother. Tinimbre ko na bahay mo brother.
Nic👍
Noise damper must be added
Sir you Used Black Glue type material to stick.. Can you tell me name of That Glue
Hi, I'm working on a machine which is request a blower fan. I design and printed 3d printer and I mounted it but result was terrible. Because normally my machine( kind of hedge trimmer) draws 2,5 ampere but when I added fan its draws 12 - 16 ampere. İt's horrible. Can you share what ampere you are drawing with this machine. Also my blower fan pretty small then your. My B. fan size is height 30mm, diameter is 100 mm and 20 piece teeth. So do you have a any advice or idea what I can do to reduce my drawing current. Also I wonder how many amps your project draws.
in addition my motor is rs 555 and its rpm 16000.
SelamunAlaikum.
Solution :
1. Here, brilliant fan design is a crucial factor.
2. Change your motor to 775 motor. (Bearing)
3. For high rpm & torque, use 10-15amps, minimum, with necessary voltage.
Can i do this use cardboard ?
👌👌👌👏👏👏
Can you make an airconditioned with this design? Thanks for the idea.
use a transmission cooler/radiator. and pump cold water through the radiator. th-cam.com/video/5YVPu9hfhZo/w-d-xo.html
Great! What kind of material ist it? How thick (in mm) is it?
Pvc pipes
Noise problem
😊
it makes a lot of noise, I prefer to endure the heat.
Loud and vibrating. If you do not have the means to balance the propeller, do not even bother!
In this way motor will not be run long. Will be burn soon
orrre just buy one
It's too noisy
Much noise 🙄
Sounds so awful