Weintek hmi connection with Fx3u Plc With Rs232 cable

Weintek hmi connection with Fx3u Plc With Rs232 cable
With Cable Diagram pin Out
How To Connext Connect Weintek Hmi With Le3u With Rs232 || Mistubishi Plc fx3u Connection With Weintek
In this video I will tell you how you Weintek HMI Can connect with le3u plc Which is a china copy of fx3u Will tell this connection with rs232 cable That nobody told you about Watch the video full Subscribe My channel
#Weintek
#Mistubishi
#le3u
#Weintekcommunicationle3u

[@m.bagush.5825]

Thank You. i am stuck on FX3U in system parameters. apparently chose the FX0S

[@Mwwwwwwwwe]

Thanks dude😊 been trying to figure out how to use this plc for a while- was about to throw it away till I found your video

[@shermuhammad3601]

thanks

[@engrnoumanali8005]

Very Good lecture 👌🏻

[@engrnoumanali8005]

I'm doing Automation work in Faisalabad.

[@Technicalhunter]

Fsd me kahan

[@engrnoumanali8005]

@@Technicalhunter Number pr baat Kartay hain.....
Ap mere number pr msg kar dain

[@Technicalhunter]

Number

[@engrnoumanali8005]

@@Technicalhunter ?????

[@mhayat231]

Sir please comenicetion cable ke ley dirvr ke zarurat hi mer connection mach Na hi ho tey

[@Technicalhunter]

Nahi

[@setiasianturi_]

Hai, my analog input 0-10v only read 3900 after inject with 10v, do you have any idea to what to adjust?
i see there are 2 blue trimpot, R00 and R01, are they safe to adjust?

[@Technicalhunter]

Yes u can

[@miguelmast267]

I have a omron Hmi nb7w but I can't connect to le3u with 38400b 7 even 1 , I don't know if all Hmi have compatibility with this plc or I have a mistake in the wiring.. maybe you can show me how is the pinout in the PLC?

[@ashrafelzayady6295]

TK6070iQ upload project files from hmi to usb is disable >> i need help please ???

[@tomongmongnale5891]

Hi. bro,
I have one question ？
How to connect Pin rs232 from PLC Fx3u into connect Pin male behind Weinview HMI Tk6051IP. ?

[@Nuno_G_]

Hi. I have a Weinview TK8017IP (i think is the same as Weintek MT8071iP) and a FX3U 24MR, and this does not work for me. I have use the same pinout in the cable. Can you give me some tips? THanks

[@Technicalhunter]

Slect plc in easybudder pro fx1n fxon fxs not fx3u

[@Nuno_G_]

@@Technicalhunter yes, i have done that 😔

[@Technicalhunter]

Then check your cable pin

[@Nuno_G_]

@@Technicalhunter Can you send me your program of the PLC to test please? Have you use any special register to do the comunication?

[@etronixservices105]

Bhai Hamari PLC ka Display Nahi Araha kuch show nahi ho raha. bilkul blank ha. Kya karen??

[@etronixservices105]

Bhai Hamari PLC ka Display Nahi Araha kuch show nahi ho raha. bilkul blank ha

[@Technicalhunter]

Hmi ka masla hogaa hard wear ka

[@wallstreet497]

Is it Tx->Tx. and Rx--->Rx to get it work ?

[@waheedahmad155]

Ap sy kaisy bat ho skati ha i have many project for you plz contact me