How To Clean Your Penny Board
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- Hey guys, so here is a video where I show how to clean a penny board. Follow these steps and you will have a nice maintained board. Hope you enjoy!
Penny Board: 22" BLUE WHITE RED
Camera: Nikon D7100
Objektiv: Nikkor 16-85mm
Mad respect for the eco-friendly soap, man.
Aaah SHAT AP!
Wdym
I'm cleaning the board I got at a garage sale for..... Wait for it...... FIVE DOLLARS!!! STEEEEAAALLLL!
probs terrible quality knockoff xD
I just got a used one for 15 dollars, although it has a chip.
Nostromo I got a penny board "Nickle" for $40 on offer up steal! lol
David AHAHAH nice
Lebron Jackson I got one for 20 on offerup!
My penny board was really getting dirty so this was an amazing video to help me because I ride mine every day and I don't want to ruin it by griming up my bearings with dirt and rusting shut the bushings and connections. Thank you so much!
I’m cleaning my penny board for the first time in 6 years
1:33 Invisible spacer 😂😂😂😂😂
I think it's still on there
he never took it off
yup i just noticed that.so stupid!
He knows shit
hahahaa lmao
Why am is watching this? I don't even have a penny board:D
Lol that's funny. His voice is soothing to me though, so thats excuse for me
+Kovács Bálint same hahaha 😂
you are commenting this on every pennyboard video
me to non penny boarders squad
sorry im not in the non penny boarder squad and i know you dont care
His voice is so relaxing
lol true
Bob Ross be like
btw, to know how to get your wheels right tight, just check if they're wobbling from left to right a little bit, that means there good.
OverTheTop yep, Nice tip
If you have a spacer in between your bearings you can tighten it as much as you can.
If you have a spacer in between your bearings you can tighten it as much as you can.
I love how he's cleaning a clean pennyboard, well at least way cleaner than how mine is X) Other than that nice video and very helpful.
just got one from my boyfriend's cousin for ten bucks. it's a great board. thanks for posting the video :)
thank you for this video! I watched your video a few years ago but I never got the courage to do until now
i like the way u recording your video.keep up the good work.your video quality is very satisfying and its very clear
1:35 you didn't take anything?!?!?!
I found a board for $50 but it’s so dirty thank you for this video it looks brand new
I already know how to do this But it is just fun to watch XD!!
Dude if your going to clean the bearings, use liquid soap; buy a bones bearing cleaner and bones speed cream at your local skate shop. Its stupid that you clean the wheels, they WILL get dirty...
Yeah but it makes sense to clean the inside of the wheel incase any crap gets in there
the inside of a wheel won't get anything in there, especially on a penny board
skate life he means the bearings i think.
+AandA GamingFTW the guy in this video is probs pretending to know everything about penny boards
21 RB if you have a penny board your gonna cruise the shit out the bearings and later on the insides of the wheels and the spacer will get as dirty as the bearings,if you don't clean them your cleaned bearing can get dirty due to the grim and dirty inside the wheel and spacers
To clean my bearings, I personally like to use baby oil or skateboard lube. I just use baby oil since it was something i already had but what I do is i put all my bearings in a ziploc bag, then pour some baby oil in the bag, then I kinda mix the bearings in the bag, then take one bearing out one at a time and use a wire toothbrush to clean out all the rocks and dirt. Then wipe the excess baby oil off the bearing with a tissue. (Btw I got this tip from Chris Chann)
Very good video , helped me out a lot .
Thanks!
just a tip for the the trucks its important to mark witch is the front and the back it important to not get them mixed. good video!
Thank you so much 😤👍
This video is really good I learned so many new things
No. Just no.
Wow!! This video is the best tutorial on how to clean your penny board! Great job and keep up the good work!!!!!
Wow you are gullible.
Lol, you titled the video "How to clean your Penny board" but you never actually cleaned the board! Nice vid btw.
The deck doesn't need to be cleaned because there will be know harm to the pennyboards mechanism so really all you have to do is clean the mechanism from breaking so it functions
yeah i thinks its a matter of personal preference
Fab video, very helpful!
Thx for the video it helped so much 😆
You're welcome! :)
Don't follow his instructions your board will rust
Super helpful - subscribed! Thank you! 👍
Does it matter what order your bearings go on? Thanks for the vid also I fount it very helpful.
awesome job dude :)
Thanks man! :)
Amazing bro! Thanks
What a beautiful pennyboard.
I did a video almost just like this it's called Pennyboard makeover and good job keep up the good vids
Thank you very much! :)
yes i do! i might have a different spacer to him though!
I love his voice
Can you use any soap? If you dont have that specific soap?
Yes, absolutly! :)
+PennyboardSV ok that help me
+PennyboardSV you should be the penny board maintance
PennyboardSV luv your voice it's so relaxing
00:10 did he just say so you can take the machine parts off? U mad bro 😂
i like the way how you clean it so good nice vids please make more and good colors on your penny board
just use the axle to take off the bearing
5:55 can u tell me what that " little area" Is called? As mine broke and i can't find replacements..
I know it's been 3 years since your comment, but did you find them?? I'm having the same problem.
Thank you this was very helpful 👍
Good vid! Thumbs up
Hahahha at 1:33 he pretended he had a washer in his hand and said its hard to get off when it wasn't there lol
my penny board is now faster than before tnx for the tutorial PennyboardSV
Awesome video man! I gotta start using my better camera and up my footage!
Thanks man! :)
personally i dont do anything to the whole bolts and washers or the trucks. i literally just started pennying at the beginning of june and i just get a toothbrush and scrub scrub scrub until im too lazy to clean anymore. poof it looks clean enough.
My advice, you start actually taking your board apart and cleaning it that way. Because if you just clean the outside, then riding it will become more gritty and rusty and that's not good. Also make sure you NEVER get water on your bearings. Because that will make them rusty and break them completely.
great video and guess what,I have tried your way and its worth it.DOPE
Nope
Great video but i want to clean the boared of rust cuz it fell in the pool so im scared to try any thing on thr bearings
This is only "outside cleaning", it will be the same dirty thing in 2 days. The important parts to clean for a smooth ride are the bearings and the pivot cups....
Nice job dude helped a lot.
Thank you now my board is so clean:)
WASHERS are the rings. SPACERS are the hollow cylinders.
I have a yoyo bearing remover and it works with my Penny board
I am still waiting for my Penny Skateboard to arrive just ordered last week.
very helpful
Great Video!
You should of taken the trucks of completely and left the deck to soak, thats what I did to get my deck clean :)
PS Never soak a trick board deck! only soak the deck if it is entirely plastic and has no griptape!
it work, good job
What do you use to edit? And thanks this helped. ALOT!!
I use Premier Pro CS6. Glad it helped!
Question: Can i clean the board only BUT, with the wheels and such things?
Awesome video dude.😜
Thanks man
your "wrench" is a ratchet. your "bolts" are nuts. and your "spacers" are washers. just saying
+xrexkinect haha your bolts are nuts!
+xrexkinect those "washers" while still being washers are actually called speed rings on a skateboard, but yes his "bolts" are nuts. but lets point out actual video flaws instead, like how he cleans his wheels that will get dirty after 2 pushes instead of cleaning his bearings all he does is wipe the oil off them which is doing more harm than good...
cool story bro
was looking for this lol
share mo lang?
When you clean a clean penny board
*what*
i usually just use the jet setting on the hose and spray away
After removing my bearings I noticed that some of them are completely stuck and do not spin, even after cleaning. What do you guys recommend ?
Are these locking washers, my dad seems to think so....
Thanks bro! ;) :D
veldig bra !
For the wheels I've always just used a wet wipe........
I watch this for the asmr lol
Could you just unscrew the eight screws on top and then just take the truck off with the wheels still on plz reply so I know
Does the 27” board not have spacers in the wheels?
btw you cleaned the bearings wrong you have to clean the insides as well as the outsides and you have to do it with a special type of cleaner and then put two drops of lubricant in the bearings after the bearing dried I just wanted to know if there was something spasific to clean the deck with lol
Sorry if you've already talked about this, but how often do I have to clean my bearings?
After how long will you have to clean your board cuz I got mine today
I don't want to do this though...
Meh..
(Sprays wd-40 everywhere and doesent even know what it is for)
We have the same board
a lot of people have that board
Same
When you dropped the spacer, you said make sure it’s flat, what do you mean by flat exactly?
+Noel Neon +Maisaa PlaysGames why do you need the inside spacer because I have a proper custom penny board and it doesnt have spacers inside the wheel
you know for 5 dollars you can get a skate tool that can take off trucks,wheels and tighten the kingpin. also to take out the bearings just use the trucks to pull them off
5:55 can u tell me what that " little area" Is called? mine is broken and i can't find replacements..
WOAH MY PENNY AND YOURS LOOKS TTHE SAME, THE TRUCKS ARE WHITE RED WHEELS LIGHT BLUE BOSRD but I have CHASER brand
Do you not add any oil or grease at all?
Nice
Hey buddy does this board look attractive I mean I am ordering online so is it dull
do all of those tools work for a penny nickel board?
Cool
Could u spray paint the wheels on the penny board?
No need to oil the bearings or anything?
hello I tell me that hardness bushings have the trucks?
how often should you do this??
I want to know how long to clean the pennyboard
Why u have more dirt on the top of the penny board and barely any on the wheels
if you do brake the bearing it costs like 15 bucks to get new ones
Those bearings suck, so get people should get bones reds anyway so breaking them would help them
Patrick Keegan 😂
how much does a penny board cost? i am planning to buy another one cause my first one is just a gift from a friend.... i don't have any idea how much it cost
Three of my bearing dont turn at all. Should I buy new bearing like Bones Red Bearings, or fix it?
cindi janak you can try and clean them with a piece of cloth or you can try baby oil (not sure about this one but I think it works. definitely confirm first tho). if they still don't roll well after that then you should probably get new bearings
I have the exact Penny board as the video, color and all :)
nawwk79 y
do u have to use that kind of soap cuz i dont have any like that..
***** ok c: thx
is there a way to clean the penny board wheels without having to take apart the penny board and ruining the bearings?
Makeup wipes are actually really tough and you can wipe he wheels with them
How long can drive with out cleaning
hi, i have a question: i ordered a custom penny board with red deck but they sent a one with a black deck, now im willing to buy a seperate red deck and my question is: can you change/replace the deck easily?
Yeah. Remove the trucks from the Black board, then screw them on to the new one
He has the same color as me just the colors are switched