Listen I’m a truck guy and at first i was iffy about it turning into a lot of “construction” videos but man they’re my favorite to watch now and I look forward to them
I was raised in that life style of construction and truck driving and as to be expected my dad started teaching me how to operate equipment and drive dump trucks as soon as I could walk
Shark bite fittings are 100% the way to go for hassle free, i’m not a plumber but I’ve done a lot of bathrooms, never had a problem and never had to practice anything or take my time
I’ve never used a shark bite angle stop. Didn’t even know they made them to be honest. But a tip would be to use some T2 teflon paste on the threads of the angle stop and don’t take it apart to install. Loosen the nut, make sure the ring is lined up and slam it on the stub, tighten 1/2 turn past snug and you’re golden.
Put a little pipe dope on the ferrule (compression ring) and you'll never have a leak. It needs a little lube. A little trick is putting the garbage disposal on top of the basket strainer inside the sink will keep it from popping up when trying to install the split ring. Also looks like you got the natural stone safe Putty but for future reference regular plumber's putty has linseed oil and will cause a stain around the faucet if you put any on it. Keep them coming.
I’ve loved watching your videos for years, but these guest house renovation videos are amazing. Thanks for all the work you put into them Ryan, and all of the tips and tricks you throw in along the way.
If you do those large tiles you need to do a bar of whatever you put on the sink side so it can tie together. You need to get box extensions to make it look better and keep your electrical safe. I use them whenever I install cabinets.
One of the more interesting things I did was go to the warehouse and pick out the actual slabs of granite for my counter tops. As far as appliances, being a landlord I can tell you a good lower middle of the line appliance is the way to go. Go a step or two above the cheap crap and it will be fine for the money. If I can pay $500, $600 for a stove and get 10 years it is a deal.
Lol the 926 is nice but compared to anything above 950 it seems like a play toy. BUt ya my goal in the next 2 to 3 years is to get one of the big boys.
I agree with you Ryno. When kitchen appliances turned into tv monitors with WiFi, gps, cameras, and speakers that’s when things started breaking more often. The cheaper more simple stuff is way more reliable in my experience. I have two fridges and a deep freezer that are close to 30 years old never had a problem other than maybe a fan going out which is like a $15 self repair if you have even the slightest bit of intelligence.
Those outlets coming through the cabinets and wood surround should technically have a spark shield installed. Basically an open back box shaped plastic shield that keeps any electrical fault from catching the wood on fire.
Been enjoying the guesthouse series. I'll be sad to see it go. But I'm sure you'll have plenty of ranch improvements to share with us, including more front entrance and driveway videos.
Man awesome content always. Me and the guys at work always look forward to discussing the Ryno videos at work the day after the post! No hate but i believe i speak for the masses that we need a ALBEIT themed shirt!!
In the future just have the electrician install the adjustable new construction boxes, you can back them out to be flush with cabinets tile or anything really. They can extend out past the sheetrock about an inch and half or more. It's all I install in kitchens or bathrooms now and has made my life way easier not having to deal with the sheetrockers covering them or tile guys grouting over the screw holes
With the compression fittings, once the valve is tight to the line (not spinning anymore) you tighten 1/4 to a 1/2 turn. 3/4 of a turn would be too tight and damage the ring.
My old house here in Arizona didn’t have any grass, old river rock front yard and dirt for backyard. My other house here in Mesa have a strip of grass in front and back has grass but super small. Not a fan either of the rock scape.
Garbage disposal is such an foreign concept for me :) (I am from Serbia:), I guess it works fine, but nobody has it here, and there is no talk or desire to get one :) I guess we all grown up living without it :)
The gfi is probably on one of the upper outlets so you don’t have to go under sink to reset. However an electrical box spacer should be used to keep all the electrical in a box because of the space caused by the cabinet
As a plumbing contractor, I use a pipe sealant like teflon paste and coat lightly end of pipe, around compression ring and a touch on angle stop threads to help with non-binding of the nut to threads. Helps seal metal areas at the water-tite connection.
If you just pulled that compression fitting ferrule off, that is the problem. It was not compressed! The ferrule is supposed to be permanently compressed on the piping.
Thanks for the reminder on the fireplace Ryan. Wife has already purchased it from Amazon. I've got a lumber order for this new project because the wife just had to see the last episode of you installing it. lol
Bro I have nightmares about shark bites. When I remodeled my house my kitchen was the biggest change. Where the sink used to be there is still shark bite caps behind the wall.😱 2 years later no problems so far. But its a gamble I put hard wood floors in my entire house😬
Hehe. figures about the counters, now we wait for the next home depot run :P .... BTW hit me up if you have any question about that Firestone pond liner or the best ways to install. Happy to advise/ help. (call/ text
Chad the Plumber here...those angle stop go on better and wont leak if you use pipe dope "pipe thread compound" on the angle stops threads and a tiny amount on the brass ring...1 year late, but yeah it will make for a better seal and a smoother install...those threads need some lube. watching your whole "guest house reno projects " while work is slow.
dude sharkbites are the shit, i use them for the rv park but sucks then freezes and there is a guizer and trying to slam them on with water spraying in your face lol
You're right not to have a black cooktop. They show every speck of dust and tiny speck of grease. If you clean one side and then look at it from another direction you see all the marks left from cleaning it from the first side.
Listen I’m a truck guy and at first i was iffy about it turning into a lot of “construction” videos but man they’re my favorite to watch now and I look forward to them
I'm truly going to be sad when this series is over! I still love all the vids at the end of the day!
But in the future he did say he will be building a huge garage kinda like Jack.
@@osvaldo554 that'd be dope
Diggin Snows new truck!
I was raised in that life style of construction and truck driving and as to be expected my dad started teaching me how to operate equipment and drive dump trucks as soon as I could walk
loves the 2nd gen ! need more dodges on the channel
@Nirus banyu 🤣
I'm a GM guy, but i have a soft spot for a nice clean 2g!
I really hope the ranch projects aren’t ending anytime soon. Favorite vids and I came here originally for the truck vids
Biggest piece of equipment over drove was a Deere 8300 packing silage. You’re definitely right it’s a good time!
Looks great brother, love the wood accent mantle, kitchen, everything even down to the Warning sticker in the sink, sheesh 😎
Shark bite fittings are 100% the way to go for hassle free, i’m not a plumber but I’ve done a lot of bathrooms, never had a problem and never had to practice anything or take my time
Dont forget your receptacle spark rings where you installed wood/tile!! ⚡🔥
Everything looks great, keep it up!!! 🤘😎🤘
Love to hear snows 24v! Happy to see some Cummins coming to the channel!
ranch/house videos are the best videos
I’ve never used a shark bite angle stop. Didn’t even know they made them to be honest. But a tip would be to use some T2 teflon paste on the threads of the angle stop and don’t take it apart to install. Loosen the nut, make sure the ring is lined up and slam it on the stub, tighten 1/2 turn past snug and you’re golden.
That "waterfall edge" just says broken toes to me.
Love your channel. Trucks, renovations, random construction, heavy equipment, animals, dirt bikes, and everything else.
Yeah boi new guest house vidya.
Man, we so look forward to all these vids Ryno.
Thanks for putting out some phatt content to keep us feeling normal in these crazy days, stupid virus.
29:30 “need a bigger snake….. Story of my life” 😂
When you use compression fittings you need to use rectorseal number 5 thread sealant on the threads and thing compression ring, always works for me.
He should make a rino ranch channel for all the videos abt the ranch
Put a little pipe dope on the ferrule (compression ring) and you'll never have a leak. It needs a little lube. A little trick is putting the garbage disposal on top of the basket strainer inside the sink will keep it from popping up when trying to install the split ring. Also looks like you got the natural stone safe Putty but for future reference regular plumber's putty has linseed oil and will cause a stain around the faucet if you put any on it. Keep them coming.
i ran a cat 980 for a couple of years and it was dang fun!
Im glad you are almost done but sad that you are almost done lol . Love the home renovation videos . Cant wait for the main house renovation 👍👍
plumber apprentice here, we tighten compression shut off valves pretty tight, but we use pipe dope.
For the few times I do plumbing I always opt for shark bites, they cost more but it's much more convenient and easy to use.
Those r the best work boots ,shoes ever lol
I’ve loved watching your videos for years, but these guest house renovation videos are amazing. Thanks for all the work you put into them Ryan, and all of the tips and tricks you throw in along the way.
Almost every time I watch these videos I’m in break room of my Home Depot, crazy how things worked out
Sun zero or Viking. My fathers had a subzero for 20 years never a issues same with the Viking cook top. I have all Viking and love it !
If you do those large tiles you need to do a bar of whatever you put on the sink side so it can tie together.
You need to get box extensions to make it look better and keep your electrical safe. I use them whenever I install cabinets.
I’m with my ass off today!! Straight needed this. Praise you RYNO
@Nirus banyu 🤣
One of the more interesting things I did was go to the warehouse and pick out the actual slabs of granite for my counter tops. As far as appliances, being a landlord I can tell you a good lower middle of the line appliance is the way to go. Go a step or two above the cheap crap and it will be fine for the money. If I can pay $500, $600 for a stove and get 10 years it is a deal.
You need to drive a 976 loader. It'll make that 926 seem like a lawn tractor
Lol the 926 is nice but compared to anything above 950 it seems like a play toy. BUt ya my goal in the next 2 to 3 years is to get one of the big boys.
Always major life motivational.....
I agree with you Ryno. When kitchen appliances turned into tv monitors with WiFi, gps, cameras, and speakers that’s when things started breaking more often. The cheaper more simple stuff is way more reliable in my experience. I have two fridges and a deep freezer that are close to 30 years old never had a problem other than maybe a fan going out which is like a $15 self repair if you have even the slightest bit of intelligence.
Early, Love the videos!
100% truth on the lower end appliances vs stupid high end ones that always fail.
I love how TH-cam don’t tell me you uploaded something even tho I have ALL notifications turned on for you
That countertop works out really well. That's something I'd buy for my house.
I have the same cooktop and it works great
Looking amazing bro!
Ryan keep up with the good videos
Those outlets coming through the cabinets and wood surround should technically have a spark shield installed. Basically an open back box shaped plastic shield that keeps any electrical fault from catching the wood on fire.
The counter tops looks absolutely Amazing
Looks sick af
Been enjoying the guesthouse series. I'll be sad to see it go. But I'm sure you'll have plenty of ranch improvements to share with us, including more front entrance and driveway videos.
Nice work there Mr. Road King !
We need more of snow!
Awesome 👍👍
Man awesome content always. Me and the guys at work always look forward to discussing the Ryno videos at work the day after the post! No hate but i believe i speak for the masses that we need a ALBEIT themed shirt!!
Looking clean👌🏻
Looking good
Bet a piece of stainless steel sheet would look good for the back splash on the stove area
Love the kitchen looks awesome 👌
Don’t forget to put a vent over the stovetop Ryan. 👍
In the future just have the electrician install the adjustable new construction boxes, you can back them out to be flush with cabinets tile or anything really. They can extend out past the sheetrock about an inch and half or more. It's all I install in kitchens or bathrooms now and has made my life way easier not having to deal with the sheetrockers covering them or tile guys grouting over the screw holes
Kitchen looks good! Maybe I'm just old fashioned but I don't know why people like the waterfall counter
With the compression fittings, once the valve is tight to the line (not spinning anymore) you tighten 1/4 to a 1/2 turn. 3/4 of a turn would be too tight and damage the ring.
Do some type of led strip lights under the counter where ir legs would go but will look good for show
I agree, fuck full oven, put an airfryer on the side of the stove and ur golden
Also ryno a lot of us just use silicone in the sink for the drain now. Plumbers putty drys out and leaks over time
My old house here in Arizona didn’t have any grass, old river rock front yard and dirt for backyard. My other house here in Mesa have a strip of grass in front and back has grass but super small. Not a fan either of the rock scape.
GFI plug might be a good option under that sink >8)
Yeah 😁
Cool
Garbage disposal is such an foreign concept for me :) (I am from Serbia:), I guess it works fine, but nobody has it here, and there is no talk or desire to get one :) I guess we all grown up living without it :)
when is the main house renovations???? love the renos
Haha gotta save up a couple hundred thousand before I start that one 😅
Any plans to put a vent hood in the kitchen?
Also no GFCI around water????
The gfi is probably on one of the upper outlets so you don’t have to go under sink to reset. However an electrical box spacer should be used to keep all the electrical in a box because of the space caused by the cabinet
I’m a loader Operator I load trucks with lime stone everyday
No, that turf looks bad but kitchen is kicking it
As a plumbing contractor, I use a pipe sealant like teflon paste and coat lightly end of pipe, around compression ring and a touch on angle stop threads to help with non-binding of the nut to threads. Helps seal metal areas at the water-tite connection.
When ya gonna restock your work for it decals for Texas ???
Tephlon tape works wonders
That outlet under the sink should be a GFCI, hell it probably is and I’m just blind , that being said that kitchen looks awesome!
Doesnt need to be one down there but needs to be protected by one on the load side and might have needed a goof ring.
Are you adding a hood on the top for the stove?
No exhaust hood over the stove?
I DMed you at Ryno Ranch with a few plumbing tips.
Awesome work but you need to change out that outlet under the sink to a GFI. You should know better. 😂
Let’s go
If you just pulled that compression fitting ferrule off, that is the problem. It was not compressed! The ferrule is supposed to be permanently compressed on the piping.
Thanks for the reminder on the fireplace Ryan. Wife has already purchased it from Amazon. I've got a lumber order for this new project because the wife just had to see the last episode of you installing it. lol
Bro I have nightmares about shark bites. When I remodeled my house my kitchen was the biggest change. Where the sink used to be there is still shark bite caps behind the wall.😱 2 years later no problems so far. But its a gamble I put hard wood floors in my entire house😬
are you not required to have GFI plugs around wet areas?
Shark bites for the winnnnnnnn!
Hehe. figures about the counters, now we wait for the next home depot run :P .... BTW hit me up if you have any question about that Firestone pond liner or the best ways to install. Happy to advise/ help. (call/ text
Chad the Plumber here...those angle stop go on better and wont leak if you use pipe dope "pipe thread compound" on the angle stops threads and a tiny amount on the brass ring...1 year late, but yeah it will make for a better seal and a smoother install...those threads need some lube. watching your whole "guest house reno projects " while work is slow.
Are the countertops from H cabinet? Best Chinese countertops in SD
"Need a bigger snake...story of my life"😂😂😂
Hey just wondering would you ever show who is going to be staying in the house
Guys! I think I figured out who is moving into the guest house, after watching this. I think it’s Snow who is moving in.
I have OCD as well, and my OCD is actually removing any plastic pieces on all the new stuff I get....perhaps I am your evil twin Ryno? lol!
No vent above the cooktop?
Is the kitchen getting a exhaust fan?
Guest house lookin beautiful but how come you didn’t add another cabinet on the left side of the window?
If yours not first, you’re last… Work for it 💯
Next time Perry’s plumbing comes to your house I would just ask them to pro press or swear two valve on
dude sharkbites are the shit, i use them for the rv park but sucks then freezes and there is a guizer and trying to slam them on with water spraying in your face lol
Ryno you not using chrome rings hurts the plumber me
Trips to depot ‼️ (23)
You're right not to have a black cooktop. They show every speck of dust and tiny speck of grease.
If you clean one side and then look at it from another direction you see all the marks left from cleaning it from the first side.
Range hood for the cooktop??