This is a great video just for breaking down a glock! Thanks!! It's been 2 years since we've done this and wanted to upgrade so this reminded us of several things. THANK YOU !!!!
Don't forget to remove the striker channel liner if you are using the heat method instead of air cure. Worth saving the possibility of it melting, otherwise decent technique.
@@CaptainBerz You are right that it would "most likely" not hurt it, but not everyone is as familiar with the tools and then techniques of even heat distribution, so for me better safe than sorry. The Firing Pin Channel Liner SP01148 replacements can be found for 5-7$ online. But atm it might be better to remove than count on getting one replaced if you only have the one firearm.
That skateboard grip tape is genius, i rack the slide on my training gun with foreign objects to practice one hand manipulations, the tape there helped with using my hands as well and quieting that noise when I rack it on something . I know this is years late but thank you haha
The title is a little misleading....I thought I was going to see a slide painted....the title should say “The process I used to paint a Glock slide”....
CaptainBerz Should say Glock slide paint prep. I was wondering why you were leaving on your decals while taping your slide. Only after you reveal your not actually painting. And instead of taping your sights they should just be removed.
I painted over the extractor with a marker, some ink may have gone inside the extractor hole, would this cause failures to feed? Cause i went to the range with 150 rnds and 6 rnds failed to feed.... i have never had this problem in the past, wonder if its the ammo or the paint
Very good point. With an " Air Cure," it wouldn't have been an issue, but Definitely should be mentioned for a bake, even at a "low" temp since the channel liner is thermoplastic. Even if you can't afford the right tool, a 5/16 will thread and remove..but will also probably destroy the current one, but they're $5 so worth replacing rather than trying to remove a blob of melted plastic and delaying your Mod/Build.
Like to see someone paint the mag release, or get a cool.extended one to match, the pins, barrels slide, and the slide stop and slide release ect. A full color coordinated pistol with matching small pins, buttons, and every the recoil spring that show out of the end of the slide under the barrel.
Thank you very much for this video. I have a tiny question please, Can we use any paint to repaint the slide? or does it have to be a special kind of paint, where I live, we don't have high-end spray paints.
@@CaptainBerz Well, Capt Butz, if clickbait is the objective, just show big boobs and say, "get some paint and do stuff, blah, blah". The title I saw was "Painting a Glock Slide", as in the action verb; not, "Let Me Tell You a Story". If random jiberdy jabery is the objective, why are you so rude? Just sayin'
I'm getting ready to pain some gun parts on my s2k, including a muzzle brake. I did some research and heard a lot of good things about this spray paint called Dupli-Color Engine paint, enamel with ceramic added to it. Supposedly what a lot manufactures use to paint car engines. Not only is it durable, it's supposed to hold up to high heat, and it comes in a lot of colors. I'll post how it went after I am finished with the project.
@@CaptainBerz just seen this but if you make a fucking tutorial video my guy use every piece of information in that video of course everybody don’t know how , that’s why they’re here you dumb fucks.. why post a tutorial then ask a dumbass question like that to someone that is viewing your content ? I should smack you idgaf if this is 2 years ago you definitely getting a dislike now
I watched it again on my tv so I could REALLY see the slide and it looks a tad bit Like 600 grit sand paper type finish, I have painted at least 10 slides but with durakote "aerosol can" maybe it just looks that way threw video?
lol you know those guys who add flame stickers and badges on their car to make it seem fast instead he didn’t do anything but make it look like ass.... this is the gun version. no better than a stock Glock except you didn’t leave a single thing to be done haha
Cassidy, you should be a designer, it would be awesome. All cars would be the same color, all clothes we wear would be required to be drab grey, and all our homes would be the same color according the neighborhood you live in. Down with freedom of expression!! DERP.
Thanks for the fantastic video. If you need parts, I get top shelf parts for my Glock at close to wholesale prices from spectresupply2 on ebay and spectresupply1 on Gunbroker. They have way more parts on ebay, but things like frames on Gunbroker. I've bought tons of parts from them. They buy out big manufacturers' overstock and then sell it for a huge discount. Probably once a month or so, I check them out - they're always getting new stuff. They also have 1911, AK, Sig and other parts.
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
I just colored my G45 with a crayon after watching this...
How the crayon looks like..? I wanted to colour back my g17 barrel only, because too many scratches.
@@yassierjamaludin9451 he meant because of the proccess it takes to paint, he was joking about the crayon.
Lol
Do nail polish the wax from crayons melt out when you take it to shoot
This is a great video just for breaking down a glock! Thanks!! It's been 2 years since we've done this and wanted to upgrade so this reminded us of several things. THANK YOU !!!!
Great to hear!
Don't forget to remove the striker channel liner if you are using the heat method instead of air cure. Worth saving the possibility of it melting, otherwise decent technique.
I only use 100ish degrees, which will not melt it. But great point. Thanks for watching!
@@CaptainBerz You are right that it would "most likely" not hurt it, but not everyone is as familiar with the tools and then techniques of even heat distribution, so for me better safe than sorry. The Firing Pin Channel Liner SP01148 replacements can be found for 5-7$ online. But atm it might be better to remove than count on getting one replaced if you only have the one firearm.
Great video!!! Answered every question I had, thanks a lot!!!! Also gave me confidence to paint my slide.
Just did mine EXACTLY like you said ! Came out AWESOME thank you sir !!! G 19 G 4 .. The Oven was a great idea !!
That skateboard grip tape is genius, i rack the slide on my training gun with foreign objects to practice one hand manipulations, the tape there helped with using my hands as well and quieting that noise when I rack it on something . I know this is years late but thank you haha
"I'm not going to paint this one" Then change the name of the video. SMDH
I apologize if you are incapable of comprehension.
GUN TIMES 🤣🤣🤣
The title is a little misleading....I thought I was going to see a slide painted....the title should say “The process I used to paint a Glock slide”....
@@scooper420 yep
CaptainBerz Should say Glock slide paint prep. I was wondering why you were leaving on your decals while taping your slide. Only after you reveal your not actually painting.
And instead of taping your sights they should just be removed.
Thanks for showing what not to do. Reminds me of a stolen bike that someone painted
Lol I've never heard of that, have you done that?
@@deesteve4156 kids do it all the time in the hood 🤣🤣
This is the exact video I’ve been looking for
I did this on Thanksgiving with silver metallic spray paint to make a two-tone glock 22.
I want to paint my Glock 43x slide silver. Where can I get the spray? Or the name of the spray?
dang berz, what up with that filthy oven. throw a splash of tactical oven cleaner. lol!!
Use 3m painters tape .
Can this method be applied to other handguns? Asking for a Sig P220
Great how to vid, thanks. I would like to know more about the kkm barrel and who did the stippling on your FDE Glock. It looks awesome
Did the heat from the toaster oven shrink or mess up the striker channel liner at all?
I never had any issues.
Cut a piece of cardboard and slip it in the rails. Easier than tape.
Great idea!
I painted over the extractor with a marker, some ink may have gone inside the extractor hole, would this cause failures to feed? Cause i went to the range with 150 rnds and 6 rnds failed to feed.... i have never had this problem in the past, wonder if its the ammo or the paint
I didn't see you remove your Stryker liner did you melt it inside of it when you put it in the oven
I wonder how many ppl melted there striker channel liner after doing this😂 this guy didn't mention anything about it at all
Very good point. With an " Air Cure," it wouldn't have been an issue, but Definitely should be mentioned for a bake, even at a "low" temp since the channel liner is thermoplastic. Even if you can't afford the right tool, a 5/16 will thread and remove..but will also probably destroy the current one, but they're $5 so worth replacing rather than trying to remove a blob of melted plastic and delaying your Mod/Build.
Or use a heat gun
Bruh at 150? Lmao gtfoh, you think a FIREARM doesn't get to 150 during normal operation?
Why didnt you remove the sights. Alot easier thsn taping then.
Should I use a clear coat after I’ve painted it? Thinking about doing like a storm trooper white and gold barrel
It won’t hurt anything to do so
Great video bro! Definitely going to try this on my G20SF. Thanks!
Can I use body putty on engraving so nobody thinks it's a glock?
Would this method work on a Taurus G3? Carbon Steel?
How do you keep from filling in the serial number to keep it visible ?
Light coats. It won’t disappear. .
I paint my slde and the barrel will not fit in it now. What should I do to fix it ?
hi my name is David I have a s&w sd9ve I wanna paint the gun slide ..what kind of paint do I use
Where can I send my slide to get coated?
I want to paint my Umarex Glock 19 gen 3 metal slide with same as the real one can somebody tell me what is the kind of pain using the real glock?
Hello, i have a question, how to get the exact same colour as a standard black glock?
Nope, not going to happen.
does it changed the texture of the slide?
Did you use a primer and top coatin
How well does the alumahyde 2 hold up?
Very well if baked on properly.
When bro said titanium that county came out that’s when I knew this video was official😭😭😭
HDX is Home Depot's garbage house brand ... it has infected almost all Home Depot departments.
Wouldn't it be better to remove the sights?
Sure, it would be better!
You can always tape it off.
Try frog tape. Yes that's the name of it.
How do i paint my glock do i just use paint?
No primer first?
Like to see someone paint the mag release, or get a cool.extended one to match, the pins, barrels slide, and the slide stop and slide release ect. A full color coordinated pistol with matching small pins, buttons, and every the recoil spring that show out of the end of the slide under the barrel.
What type of paint you used
And if you want the battle worn look ignore most of that prep except a degrease
its even but looks very textured...idk if i like that. I like the color but i prefer the smooth finish
It is smooth
@@CaptainBerz Ah no that is not smooth that has a textured look.
lost me when you showed the chip, why bother if it wont hold up.
thanks! but what paint? this info is crucial
Aervoe Camo Paint
You never said what you actually used. Just from the Auto Store. Was it like a spray paint or the touch up kind of paint?
You can use anything. I used Alumahyde II in this video.
Why not just remove sights 🤔🤔
How long do you leave it in at 150 ?
I’d say crack door. Lowest temp. 10-15 minutes
Is there a way to avoid that "orange peel" look? Or is that what you preferred?
Lower you volume of material
Cant I just tape off where you dont want paint?
Great video! Your glock looks great! How are you liking those straight 8's?
strong like monkey My favorite so far.
CatainBerz how well has the paint job held up for the last couple of years now? Thanks
It hasn't, like all finishes. I shoot my guns and use them.
I just want to know the damn paint you used but you leave out important aspects of painting the slide.
Stick to your day job.
Considering how many ARs I've taken rattle cans to over the years I think it's time for my G17 to get a coat lol
Did u say "Real Cool" spring??...😂😂😂
Recoil spring
I love how my s&w is identical
Fun fact. There was a lawsuit involved because of the similarity.
Is TiN finish a durable finish? And what's the advantages of having a TiN coating on the barrel.? Ty
Brian Jewell Yes it is one of the best finishes out there. It is also slicker when oiled than a normal coating. Great for barrels, bolt carrier, etc..
Is it similar to nickel boron coating? I'm assuming it's superior?
Can somebody tell what type of paint he used?
Like please comment below
⬇️
ChillxnMane I believe he said upfront Brownelle’s Aluma-Hyde ii.
Great video, I may be giving this a try..
Looks like your blue tape got too hot. That ruins the adhesive. I use blue for everything.
I love the brown frame. What color & process (Cerekote, Gun Kote, etc) did you use?
If it chipped than daily use will beat it up
How long does it last ?
Depends on paint. If holstering everyday, no finish holds up.
The paint look like original glock color?
It can if you get the right paint
@@CaptainBerz did u know what is the original color name or code?
What is the color u apply for?
No clue, this was years ago. I paint things all the time. Sorry.
Sorry bro but that looks like shit, paint was put on way too thick, the orange peel is horrible
Was a touch thick, but works great!
Good explanation and all, but I need to see it done
Way better ways and videos to drawn out for nothing
Thank you very much for this video.
I have a tiny question please,
Can we use any paint to repaint the slide? or does it have to be a special kind of paint, where I live, we don't have high-end spray paints.
I have access to this paint, will it work? "GETSUN Chrome Spray Paint"
Awesome ty I’m going to do it ..
I love that intro beat.
Nice airsoft gun
Are you serious?
+BigOldF150 lol nope
Jeff Smith i think it's a nerf
id remove the sights
Make the playback speed 1.25x
You're welcome
This wasted 12min of my life your suppose to go through the whole process not short cut and you didn’t paint nothing
😢
has unlicenced airsoft glock any tip how to make glock logo 9x19 and austria on slide ? which paint or sticker
Crayons or fill in with liquid paint and wipe off the slide to inlay it is the only way I have seen.
Cool!
you forgot to actually paint the glock slide.
Plenty of detail. Stop whining.
@@CaptainBerz Well, Capt Butz, if clickbait is the objective, just show big boobs and say, "get some paint and do stuff, blah, blah". The title I saw was "Painting a Glock Slide", as in the action verb; not, "Let Me Tell You a Story". If random jiberdy jabery is the objective, why are you so rude? Just sayin'
lol lets look down the slide. I dont care if you safety it you cant shoot my through the internet lol
Hey! Do you let it cool once you take it out the oven before spraying it?
No. When it’s warm the metal pores are open. Better adhesion.
Thanks
This is awesome...
Nice
what kind of paint?
Alumahyde II
I'm getting ready to pain some gun parts on my s2k, including a muzzle brake. I did some research and heard a lot of good things about this spray paint called Dupli-Color Engine paint, enamel with ceramic added to it. Supposedly what a lot manufactures use to paint car engines. Not only is it durable, it's supposed to hold up to high heat, and it comes in a lot of colors. I'll post how it went after I am finished with the project.
Good video. The description...not so much lol.
ShigityShigityShwa There are ways to come up first in the search's. Although they might not look pretty...lmao
Haha I figured thats what you were doing. I've read enough of your descriptions to know...this one though...lol
Wrecked. Paint... fail.
Wtf he didn’t even put the gun back together now I’m stuck 🤦🏽♂️
You can't reverse engineer a few pieces? Wow.
Lmao. RUTHLESS.
You shouldn’t own the gun if you can’t take the slide apart and put it back together.
🤣🤣🤣
@@CaptainBerz just seen this but if you make a fucking tutorial video my guy use every piece of information in that video of course everybody don’t know how , that’s why they’re here you dumb fucks.. why post a tutorial then ask a dumbass question like that to someone that is viewing your content ? I should smack you idgaf if this is 2 years ago you definitely getting a dislike now
Can you please help me with a Glock 17 slide I really need one for my new Bild
Did u find a slide ? There are plenty of sources for cheap ones
Jesus
Christ
@@CaptainBerz just repainted my glock 21 gen 2 😉👍
Waste of time...
Nice color but textured finish? Nah
It's not textured
I watched it again on my tv so I could REALLY see the slide and it looks a tad bit Like 600 grit sand paper type finish, I have painted at least 10 slides but with durakote "aerosol can" maybe it just looks that way threw video?
Randizle Peregoy how did you do it with durakote
lol you know those guys who add flame stickers and badges on their car to make it seem fast instead he didn’t do anything but make it look like ass.... this is the gun version. no better than a stock Glock except you didn’t leave a single thing to be done haha
Cassidy, you should be a designer, it would be awesome. All cars would be the same color, all clothes we wear would be required to be drab grey, and all our homes would be the same color according the neighborhood you live in. Down with freedom of expression!! DERP.
Lol misleading vod
VOD?
I'm sorry but there nothing nice about that finish . You used way too much .
ติดไม่ทนทาน
Thanks for the fantastic video. If you need parts, I get top shelf parts for my Glock at close to wholesale prices from spectresupply2 on ebay and spectresupply1 on Gunbroker. They have way more parts on ebay, but things like frames on Gunbroker. I've bought tons of parts from them. They buy out big manufacturers' overstock and then sell it for a huge discount. Probably once a month or so, I check them out - they're always getting new stuff. They also have 1911, AK, Sig and other parts.