Awesome video! I also vinyl wrapped with mine and did the slayer mod - full tutorial for BOTH of those on my channel - I wish I did wrap it in matte white though to match my grinder but it's fine as it is now. I am considering those exact lever upgrades from probably the same and only Etsy seller that makes that specifically for the slayer mod (levers on both sides). I hear changing the basket or shower screen makes no difference in the cup though so I haven't changed it - do you notice a difference in taste or ease of extraction?
Thanks for watching! Just subscribed to you! Great job on wrapping yours! Have you thought about wrapping the top of it? I honestly didn't notice too much of a change with the basket or shower screen.
@@CabeensCoffeeCorner ya I wanted to keep it as simple as possible though so opted for just the 2 side panels. Doing the front looked like a pain, kudos to you doing it. I am considering taking some leftover to do the front of the drip tray
I respect the wrap and appreciate the vision but man, I reckon the stainless would've looked better than that job. Pretty intricate thing to wrap; kudos for giving it a go.
Dude!... that drip tray is super gross! can't believe you didn't clean it before shooting the video - still i like the idea of not having to pull it out and empty it.
I have to remove my drip tray everyday, as well as the water tank, or I'll find a cockroach or two in there - especially the drip tray. If I could plumb it, I might go for that
Is your knob for the slayer mod stock or did you change the needle valve? I was under the impression the range from closed to open is very narrow on the stock knob.
Unfortunately since it’s wrapped it’s hard for me to show. Basically it’s like putting on a big sticker. You take the sheet and pull and heat it with a hair dryer to get it around the corners. Then cut with a knife!
I don't see the reason to stick something onto my beautiful machine because this thing comes with a built in clock and you can set a wake-up-time. The only reason to still stick a switchbot on there would be if I really need a coffee as soon as I get home and could't wait another 10 Minutes to let it warm up normally. Did your machine not come with that function? Maybe it's just for the newer model of the dual boiler?
@@CabeensCoffeeCornerI’m sure putting a wrap on a coffee machine is harder than it looks. Maybe there’s a reason people don’t do it? (Cos it’s a daft idea and it looks awful 😂)
Awesome video! I also vinyl wrapped with mine and did the slayer mod - full tutorial for BOTH of those on my channel - I wish I did wrap it in matte white though to match my grinder but it's fine as it is now. I am considering those exact lever upgrades from probably the same and only Etsy seller that makes that specifically for the slayer mod (levers on both sides). I hear changing the basket or shower screen makes no difference in the cup though so I haven't changed it - do you notice a difference in taste or ease of extraction?
Thanks for watching! Just subscribed to you! Great job on wrapping yours! Have you thought about wrapping the top of it? I honestly didn't notice too much of a change with the basket or shower screen.
@@CabeensCoffeeCorner ya I wanted to keep it as simple as possible though so opted for just the 2 side panels. Doing the front looked like a pain, kudos to you doing it. I am considering taking some leftover to do the front of the drip tray
I respect the wrap and appreciate the vision but man, I reckon the stainless would've looked better than that job. Pretty intricate thing to wrap; kudos for giving it a go.
Yeah I completely agree. I’m probably gonna take it off.
Dude!... that drip tray is super gross! can't believe you didn't clean it before shooting the video - still i like the idea of not having to pull it out and empty it.
Lol it takes a lot of time time to film these videos and that was an oversight! It doesn’t smell or anything though!
I have to remove my drip tray everyday, as well as the water tank, or I'll find a cockroach or two in there - especially the drip tray. If I could plumb it, I might go for that
@@digital100000😳
😰
Do you consider this machine difficult to repair or maintain
Not in my experience
Can you share your setup under the cart? I’d like to see how you setup your rinsing jug. Are you running a pump, what pump etc
Nm. Found your setup video!
Haha was just about to reply with the link!
Is your knob for the slayer mod stock or did you change the needle valve? I was under the impression the range from closed to open is very narrow on the stock knob.
Stock and it seems wide enough for me
Could you do a video on how to do the slayer mod or links to a guide on how to?
Nice mods, cheers!
Thanks for reminding me of that! Here is the video I made. th-cam.com/video/dYQ2h1f_30w/w-d-xo.html
can you show how you wrap your machine?
Unfortunately since it’s wrapped it’s hard for me to show. Basically it’s like putting on a big sticker. You take the sheet and pull and heat it with a hair dryer to get it around the corners. Then cut with a knife!
Just watch how they wrap mirrors of cars, that's the hardest part, if you can do that you can do everything else
Switchbot is really goid Idea
Works great!
I don't see the reason to stick something onto my beautiful machine because this thing comes with a built in clock and you can set a wake-up-time. The only reason to still stick a switchbot on there would be if I really need a coffee as soon as I get home and could't wait another 10 Minutes to let it warm up normally. Did your machine not come with that function? Maybe it's just for the newer model of the dual boiler?
That wrap looks woeful, and clean your drip tray wtf
Yes I’m aware
very insane dji~ wanna more view?s~be well!partner,=))
Thanks!
dat drip tray 🤢
Drip trays are never really clean
@@CabeensCoffeeCorner speak for yourself.
That wrap🤦🏻
Harder than it looks
@@CabeensCoffeeCornerI’m sure putting a wrap on a coffee machine is harder than it looks. Maybe there’s a reason people don’t do it? (Cos it’s a daft idea and it looks awful 😂)
came out super well on my rocket@@jobgarside2719