Wow, Just got my KangerTech Topbox Mini & your video takes something explained by verbal teaching seemed EXTREMELY confusion!! But seeing your video makes it seem much more simple! What's the rules, if you buy a kangertech larger vape tank?? With it being a RBA, is it a possibility??? My bro who has much more experience set me up with the already pre-made clapton atomizer. After playing with settings for wattage, never over 40W, & air flow; I'm finding my sweet spot setting to vape. I did have an ego pen vape, but ending up going backwards to smokes. VERY NASTY Cigar-ciggarettes due to prices in PA. Those cigar-ciggarettes are cheapest at $1.16/pack. I'm hopeful this Kangertech will save me from that NASTY smokes!!! Thanks 4 the video! If you could do a video about tempature-contol atomerizers; that would be great! Right now sticking to clapton atomizer.
Joni Fetterman I tried the ego pens. Always went back to cigs, since I switched to sub ohm tanks with 18mg nicotine small could low wattage I get the nicotine and don't smoke anymore, I choose the liquids that have a cigarette flavor and I'm not into blowing clouds. It's been working, only time I ever have a cigarette is when I find myself somewhere with a dead battery and I end up bumming a smoke
Well I now have 2 Kangertech e-cigs. One is the top box mini & I purchased the subvod Kit. When the topbox is too much for me then I switch to the subvod. I've found a combination of e-liquid to match my fancy. Hopefully I will succeed & kick the smoke habit at only 6mg of nicotine fluid. It's the sensation of smoking that is the satisfying part.
Bruno Matos HERE'S WHAT'S GREAT ABOUT HAVING AN ADJUSTABLE DIGITAL SCREEN FOR A MOD (compared to doing cartridges or buying mods with no digital screen, because alot come without it) ================= I went 1 extra coil to much on my 32 guage wire (only supposed to do 6 wraps on a 2mm "width of each coil"). I did 7 by accident. Regardless this below is how you figure out the wattage needed to vape appropriately. 2.48 ohm is what I came out with then my typical 2.3 ===== Here's the original method I was using overall but now this is what I do.... Here's method I follow for my highest point in wattage 2.48+2.48 = 4.96 × 2 = 9.92W But I saw one a few days ago in a forum which I like alot better because it gives me a precise starting point and works perfect. 2.48+2 = 4.48 x 2 = 8.96 - 1 = 7.96W (rounded off is 8W) So 8 watts is my starting point and 9.92 is my highest point (9.92 is from first figure on very top) And this is dead on too Because I open vape tool app and I use "OHMS LAW" conversion. ENTER TWO VALUES (I enter the voltage and resistance only) and I have my mod set on 8 watts "my second method" to get the 2 values below. Voltage= 4.45 Resistance= 2.48 Current= Wattage= Click Enter (and get this) Voltage= 4.45 Resistance= 2.48 Current= 1.79 Wattage= 7.98 (rounded off is 8 ) =========== So 8 watts is my starting point and 9.9 watts. Is highest I will go. Currently sitting 8.8 watts, because I will change wattage throughout vaping tank (all depending on MTL "mtl = mouth to lung, just like smoking a cigarette" )
Nice! finally i can change coil by myself
kangertech user here😍😍
Wow, Just got my KangerTech Topbox Mini & your video takes something explained by verbal teaching seemed EXTREMELY confusion!! But seeing your video makes it seem much more simple! What's the rules, if you buy a kangertech larger vape tank?? With it being a RBA, is it a possibility??? My bro who has much more experience set me up with the already pre-made clapton atomizer. After playing with settings for wattage, never over 40W, & air flow; I'm finding my sweet spot setting to vape. I did have an ego pen vape, but ending up going backwards to smokes. VERY NASTY Cigar-ciggarettes due to prices in PA. Those cigar-ciggarettes are cheapest at $1.16/pack. I'm hopeful this Kangertech will save me from that NASTY smokes!!! Thanks 4 the video! If you could do a video about tempature-contol atomerizers; that would be great! Right now sticking to clapton atomizer.
Joni Fetterman I tried the ego pens. Always went back to cigs, since I switched to sub ohm tanks with 18mg nicotine small could low wattage I get the nicotine and don't smoke anymore, I choose the liquids that have a cigarette flavor and I'm not into blowing clouds. It's been working, only time I ever have a cigarette is when I find myself somewhere with a dead battery and I end up bumming a smoke
Well I now have 2 Kangertech e-cigs. One is the top box mini & I purchased the subvod Kit. When the topbox is too much for me then I switch to the subvod. I've found a combination of e-liquid to match my fancy. Hopefully I will succeed & kick the smoke habit at only 6mg of nicotine fluid. It's the sensation of smoking that is the satisfying part.
Joni Fetterman I'm running 18mg
What king of wire are you using? nickel, titanium, ss?
What size of battery is needed for the kangertech subox Mini_C
What GA are you using
i bought new coils for my kangertech and when i put it doesnt recognize the new one,what could be done?
thx
Try use a higher wattage
👍👍👍
Can you use this in kangertech subox mini c??
Whats The best combination watts vs ohms to use? I Just bought a topbox mini but i dont know which value of resistance to make.
Bruno Matos HERE'S WHAT'S GREAT ABOUT HAVING AN ADJUSTABLE DIGITAL SCREEN FOR A MOD (compared to doing cartridges or buying mods with no digital screen, because alot come without it)
=================
I went 1 extra coil to much on my 32 guage wire (only supposed to do 6 wraps on a 2mm "width of each coil"). I did 7 by accident.
Regardless this below is how you figure out the wattage needed to vape appropriately.
2.48 ohm is what I came out with then my typical 2.3
=====
Here's the original method I was using overall but now this is what I do....
Here's method I follow for my highest point in wattage
2.48+2.48 = 4.96 × 2 = 9.92W
But I saw one a few days ago in a forum which I like alot better because it gives me a precise starting point and works perfect.
2.48+2 = 4.48 x 2 = 8.96 - 1 = 7.96W (rounded off is 8W)
So 8 watts is my starting point and 9.92 is my highest point (9.92 is from first figure on very top)
And this is dead on too
Because I open vape tool app and I use "OHMS LAW" conversion.
ENTER TWO VALUES
(I enter the voltage and resistance only) and I have my mod set on 8 watts "my second method" to get the 2 values below.
Voltage= 4.45
Resistance= 2.48
Current=
Wattage=
Click Enter (and get this)
Voltage= 4.45
Resistance= 2.48
Current= 1.79
Wattage= 7.98 (rounded off is 8 )
===========
So 8 watts is my starting point and 9.9 watts. Is highest I will go.
Currently sitting 8.8 watts, because I will change wattage throughout vaping tank (all depending on MTL "mtl = mouth to lung, just like smoking a cigarette" )
I have the kbox kit Mod/Toptank. Lowest I go is about .18 ohms, highest .6. Start at about 20-25 watts and go up till you get what is best for you