i like how they fast forward through the build. that is because it is nearly impossible to assemble. the fir is terrible, almost worse than the instructions, if that is possible.
I would suggest from my experience add some weight to the nose and moving the rudder control rod to the inner most hole on the servo and the outermost hole on the horn. I’m looking forward to your maiden flight video and hoping yours isn’t the crash monster mine is.
Thank you for the advice! I will definitely do that! I have heard about that rudder problem....not sure what would cause it. Maybe a some glitch in the circuit board?Maiden flight will hopefully be within the next week, weather permitting.
@@CrazyFastFlying the elevator goes up automatically as you add throttle in 3g mode and jumps to about 15-20 degrees nose up in 6g mode . The control arm on my elevator was set too far I put mine 6 turns in now it’s neutral in 6g and will fly level in 3g. It is not really tail heavy just push the battery full forward and check your elevator it may need adjusting. I guess it just depends on who’s assembling it at the factory
This is a beautiful looking model plane. DON'T ruin it by trying to fly it! Every reputable reviewer who tried it has crashed and smashed it! Read the RC Groups forum posts on it. The flight board in it is dog crap! 😀
I just bought it in 2023. Regards from Poland 👍
Cool video! Looking forward to the flight video! When will it be up?
Thanks! I should have it posted within the next week or so.
You’re right about that, I never got around to posting it. I’ve been really busy with work and stuff.
Very cool 👍
Thanks!
congrats : ) SlowJo
Thanks man!
So cool.
i like how they fast forward through the build. that is because it is nearly impossible to assemble. the fir is terrible, almost worse than the instructions, if that is possible.
That isn’t an rtf you have to build it.
Great flite though😁
Thanks! Actually, even though there is a little assembly required, it is still considered a RTF. It comes with everything you need to get it flying.
@@CrazyFastFlying oh ok
Is this made in China?
Yeah, I’m pretty sure it is.
I would suggest from my experience add some weight to the nose and moving the rudder control rod to the inner most hole on the servo and the outermost hole on the horn. I’m looking forward to your maiden flight video and hoping yours isn’t the crash monster mine is.
Thank you for the advice! I will definitely do that! I have heard about that rudder problem....not sure what would cause it. Maybe a some glitch in the circuit board?Maiden flight will hopefully be within the next week, weather permitting.
@@CrazyFastFlying the elevator goes up automatically as you add throttle in 3g mode and jumps to about 15-20 degrees nose up in 6g mode .
The control arm on my elevator was set too far I put mine 6 turns in now it’s neutral in 6g and will fly level in 3g.
It is not really tail heavy just push the battery full forward and check your elevator it may need adjusting. I guess it just depends on who’s assembling it at the factory
Thanks, I’ll keep that in mind!
this plane is junk. looks good on the shelf though
This is a beautiful looking model plane. DON'T ruin it by trying to fly it! Every reputable reviewer who tried it has crashed and smashed it! Read the RC Groups forum posts on it. The flight board in it is dog crap! 😀