What I really like about Russian mechanics is that they actually repair the original car parts. They disassemble the part and fix the problem to reduce costs. As for the rest of the mechanics, they just replace the parts with new ones without any trouble or difficulty.
Its largely what they're working on and how much they get paid, most people would rather pay the mechanic a little to install a brand new part they bought instead of a lot to spend time repairing the old one before installing it, in America the mechanics cost more and the parts are harder to repair or even illegal to repair/replace thanks to the dmca(the same copyright thing that youtubers hate).
As a former mechanic, the shop I worked at would rebuild stuff like transmissions, but by the time labor and parts was calculated it cost about the same as a remanufactured unit and he couldnt give as good of a warranty as they could
In the States. Almost every gas station had a couple bays and a real mechanic or two. It was normal for them to rebuild starters, alternators, and turn drums and rotors when they did brakes. Now none of them employ a mechanic. Those were simpler and arguably better days. Depending on how things go in the world economy over the next few years. We may go back to rebuilding everything to some extent.
Next make a hollow compressed air tank bumper with air fittings and customise an ac pump and clutch to give it on the roll air for air tools or lift bags. Bags can be quick inflated from exhaust then final lift with the air from tank in bumper. Best thing is bag can roll up in back or go on the jz trailer with some mudders :)
Great vid on making a home brew winch for the G wagon & at the end of the vid as the front axle as a pronounced arch in the axle!🤣🤣 Just swap out the bent axle for a new one in the G & let’s go for a drive & do donuts & donies!🤣🤣🤣🤣
A winch on a truck is for pulling, not for lifting. In a real world scenario 3000 pounds is a woefully underpowered winch for that G Wagen. Plus you're only getting that 3k pounds on the first wrap on the drum. Put 100 feet of rope on the winch, bury that truck in the mud or sand up to the axles, spool 20 feet to the nearest tree and you might be able to pull a SxS out of the mud, but not that G Wagen. Fun project, but pretty useless in real life.
Man you guys are awesome, I love your videos and I learn quite a lot about those ladas! Thanks for the learning and entertainment!
Just flip the axle upside-down and drop it again. 😆
12:43 the wheel said bye bye
...it said bye bye to its dear friend, the axle😊
🎶Ya picked a fine time 🎶
🎶to leave me loose wheel🎶
surely they will crAft it bAck to its originAl beAuty
reminds me of a scene from "the gods must be crazy" a land rover swinging in a tree. loved that movie
If S ever HTF these gentlemen would be the ones you would want to survive to help build/repair/fabricate anything mechanical.
the S will HTF because the west cannot stand the jealousy of a smart country like Russia
What I really like about Russian mechanics is that they actually repair the original car parts. They disassemble the part and fix the problem to reduce costs. As for the rest of the mechanics, they just replace the parts with new ones without any trouble or difficulty.
And charge you accordingly😡
If you think that mechanics just install a new part and it’s done.
Tell me again how you’ve never known or been a mechanic 😂
Its largely what they're working on and how much they get paid, most people would rather pay the mechanic a little to install a brand new part they bought instead of a lot to spend time repairing the old one before installing it, in America the mechanics cost more and the parts are harder to repair or even illegal to repair/replace thanks to the dmca(the same copyright thing that youtubers hate).
As a former mechanic, the shop I worked at would rebuild stuff like transmissions, but by the time labor and parts was calculated it cost about the same as a remanufactured unit and he couldnt give as good of a warranty as they could
In the States. Almost every gas station had a couple bays and a real mechanic or two. It was normal for them to rebuild starters, alternators, and turn drums and rotors when they did brakes. Now none of them employ a mechanic. Those were simpler and arguably better days. Depending on how things go in the world economy over the next few years. We may go back to rebuilding everything to some extent.
Make an opposed piston engine out of two lada engines ❤❤
Please please please 😂😂😂😂
Next make a hollow compressed air tank bumper with air fittings and customise an ac pump and clutch to give it on the roll air for air tools or lift bags. Bags can be quick inflated from exhaust then final lift with the air from tank in bumper. Best thing is bag can roll up in back or go on the jz trailer with some mudders :)
That scene turned out to be more expensive than planned.
A win is when ya don't bend an expensive axle. lol great vid guys
You guys need more scenes like that sending 😂 love the video
GUYS ARE MORE OF A FABRICATION SHOP NOT A MECHANIC SHOP ANY MORE.. 😅
This is quite amazing! If a 1.5 ton winch can do this, it makes me wonder if my 4 ton winch can actually pull harder.
8:36 That rhymed well! Starter motors just make that much power but heat up so quick. Should have reverse rotation...
Stance nation G series!
Glad to see you are still able to post new videos. I was worried that your government may had shut you down from uploading.!!!!
Fantastic - even the detail of "should I turn the sound off" 😂😂
Never expected the ending, you've got to try driving it 🤣 part 2 incoming
Love the ending 😂😂
Keep up the amazing content guys!!
You find the weak point on g wagon, now you can improve it. 😅
When you don't know what's comes next search the weak points 😂
I really hope that's just power steering fluid on the ground and not blood.
Thank you, absolutely beautiful.
Next video, how to make a G Wagon front axle housing with supplies around the garage.
Great vid on making a home brew winch for the G wagon & at the end of the vid as the front axle as a pronounced arch in the axle!🤣🤣 Just swap out the bent axle for a new one in the G & let’s go for a drive & do donuts & donies!🤣🤣🤣🤣
You guys do awesome work.
That is so cool. You guys are awesome.
Don't overlook drum diameter or diameter of wrapped cable. Pull definitely weakens as cable wrap increases.
That really is an off-road monster!
you need balls of steel when you sit in front of a steel rope in tension...😁💪
Part 2, coming soon.
Part 2, we converted a 4x4 into RWD.
they will crAft tht Axel bAck to its originAl glory
Best episode ever!!!
I feel another offroad video brewing!!!
"doesnt look too bad" Yeah, this live axle suddenly has camber but it`s fiiiiiine :p
A chainsaw winch would be an excellent alternative Vlad!
That was a huge fall! Hope the axle housing is good and you can just replace the tubes...
What a fall
The tires are leaning in. its bent lol
@@kwslife116 yeah. but you can replace the tubes.
Epic Translation win 👍🏼
oh i hope the damage isnt too severe from the fall! that probably damaged many things if the axle was bent so bad!
That Mercedes is sick tho
Day 7 of asking for 2 V8's put together to make a V16
Atleist 10L
Put a turbine in it!
lada dont make a v8
@@AA-tb4ff the zils have v8's
No no no, X16
you need a reversible variable feed controller on the starter to control speed and reverse
Now you guys need to bend the axle back and see if you can drive it.
Remember the movie,The Gods must be Crazy,when the guy couldn't get his jeep down.
I guess we're going to get a repair video on the G-wagon next.
now its a track day G-wagon
That is a great video, thanks.
That's a whole lada worth of torque.
Frozen ground and frozen tires must make it easy to bend the front axle.
Why is there a ground jumper cable running to the exhaust? Haha... Also when it fell in immediately seen the camber and knew axle was bent.
oh you must show us the aftermath of that axle!!!
on next we take two ladas and build a spaceship
Great! 👍
107% best winch 👍🌟👍
I would like to see you do a fuel injection conversion to the G Wagon on the cheap.
Brilliant 👍
“Should I turn the sound off”
😂🤣😂
That car is on its period
Doh ... as soon as it hit I noticed the camber on those wheels ... and was worried.
We make a winch out of Lada parts (and break the G-wagen)
11 Comments
536 views
11 minutes ago
62 likes
0 dislikes
889k subs
Add a minature transmission to it to switch to reverse or whatever
for a moment i thought these guys went full whistlindiesel
Would that hydrolock the motor? Oil may spil into the cilinders
HEY! Have you guys ran an engine on canola oil?
Would the starter turn the other way if the polarity was reversed?🤷🏻♂️
sadly no.
how to add front end camber
How do you like those types I need new winter ones and who better to ask than a Russian guy?
A strong tree.
Got the car at such an angle that the transmission fluid started dripping out the vent?
Day 1 of asking for 4 lada engins welded to make a X16 engine
I've been wanting to design it and manufacture it since I was a child
Автобусные двигатели и оси пикапа - не самая лучшая пара.
Make a V16 out of two monster V8s
Homeys need some Yankum Ropes
When SHTF I want these guys on my side. Only the strong and creative survive!!! Although we're going to need an interpreter...
Jet engine turbo charger plz
You guys should remove the distributor and put motorcicles cdi instead
Gud vid 💯💥
Put a motorcycle transmission in a lada please
There is snow around the year?
November in Siberia, absolutely. That even looks like a little snow, maybe mid October.
Put two V8 engines together and make a v16
nice
Garage 54, where is the chainsaw v16 car
Keep creating such wonderful videos. Your videos are always inspiring.🤘🌖🥝
A winch on a truck is for pulling, not for lifting. In a real world scenario 3000 pounds is a woefully underpowered winch for that G Wagen. Plus you're only getting that 3k pounds on the first wrap on the drum. Put 100 feet of rope on the winch, bury that truck in the mud or sand up to the axles, spool 20 feet to the nearest tree and you might be able to pull a SxS out of the mud, but not that G Wagen. Fun project, but pretty useless in real life.
Well you just missed the whole point of the video 😂😂😂
You need katrol!!!
👍
Pulley's .
this was oddly very funny.... man russia must be one wacked place...
Crazy Russians. That all I have to say...
❤👍⚡️🤘👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
A powerful winch for a rubbish car
Ogni tuo video è una storia che tocca i sentimenti e le emozioni più profonde. Grazie per la tua sincerità e il tuo talento!😱💿🎰
First
had that been a LADA axle it would have made a hole in the earth through to the other side of the planet when it fell instead of bending.....right?
Sono felice di aver trovato il tuo canale! I tuoi contenuti sono davvero di alta qualità e interessanti. Continuate così!🖼🥬🐈