Can you clear my one dout. In RTC to read data we need to pass individual register address like for second 0x00, for minut 0x01... But you don't give this address in code than how it read?
how come when i type *date its can't become an orange? * second , *minute, *hour its can become an orange? . And can we use the library #include to the coding? does it same for the syntax? thank you
Hi Johan, those are variable defined by us * second , *minute, *hour in our Arduino code. Arduino only recognises build in functions and turn them in orange syntax highlights. You can use DS1307 library to read RTC data but then code may change
Amazing video 💕❤✨ But I am facing some issue plz help... 1. How do I remove "Day" from program. ( I tried but it gating some issue like year not showing properly because sequence from 'Seconds' register get changed.) how to do it safely. 2. time and date gating reset (at initial time) every time I open the serial monitor.
Hi Thuyen Every data we read from sensor will be useful when we know that time that data has generated. This means timestamp is extremely useful to monitor and control embedded devices in real time. And RTC which is an Real Time Clock gives you the same. That's why hardly any embedded product will be build without using RTC in Projects. I hope you find this information useful. Best Wishes Umesh
Hi Nurul, in this video I've printed RTC Data Date Time on Serial monitor of Arduino IDE but if you wish you can display on any display module with Arduino. I've published another video for display module interfacing with Arduino Uno. I hope it will be useful to you Best Wishes Umesh Lokhande
This seems to be an issue with Wire.h library header file. As its a built in Arduino libraries. I'll suggest make sure your Arduino IDE is installed properly and linked all libs correctly. If not then, try reinstall or test with other computer. This will help to fix issue with arduino software. Good luck and best wishes
Hi Dung, this random value from RTC Ds1307 results due to loose connections between Arduino and RTC. Also check your coin cell in backside of RTC Module. I hope this may help you. Good luck!
Demais, muito bom mesmo, parabéns, não sei nada de arduíno, estou aprendendo agora, mas, segui direitinho todo o seu passo a passo, e deu certo certo aqui, funcionou legal mesmo, e como faço pra colocar um display (1602A) professor? Quero fazer um projeto com hora programada pra minha horta com quatro horários diferente, é muito difícil? me ajuda por favor, obrigado, parabéns.
Sir, could you explain how to set rtc time using android app (made by app inventor ex) via bluetooth communication? I need to make an alarm device which can set the time using android. Could you help me please.
Hi Sanjay, is video me RTC (real time clock) ka data Serial monitor pe print kar ke dikhaya hai! mobile ke liye arduino ko internet connectivity provide karna hoga.
Hi, Nice tutorial, i have a few questions. 1. In my arduino IDE, second, minute, hour , day ... are not highlighted? i want to ask why? 2. i keep getting an error In function[ 'main': "undefined reference to 'loop' Thank you, and i'm sorry if they are obvious, i'm new
thanks sir for this video and you spent time on it till 3:47 reealy thats great
Hi Avi, I'm glad you noted that. Thanks!
@@BINARYUPDATES thanks
great presentation dudee, suscribed
Btw that great typing tho 😂 👍
Thanks for the sub!
Sir it's really a Nice presentation
very useful presentation - that helps a lot, thanks!
please make more videos , excellent work .
Thank you Girish, I will try to make more videos on RTC as well as on EEPROM.
Thanks for update in lockdown:-)
Superb.....it's excellent
Hi, how do we add microsalise? I need split-second in the project I am using. I would be glad if you could help.
Very good description..Please shear code
Can you clear my one dout. In RTC to read data we need to pass individual register address like for second 0x00, for minut 0x01... But you don't give this address in code than how it read?
how come when i type *date its can't become an orange? * second , *minute, *hour its can become an orange? . And can we use the library #include to the coding? does it same for the syntax? thank you
Hi Johan, those are variable defined by us * second , *minute, *hour in our Arduino code. Arduino only recognises build in functions and turn them in orange syntax highlights. You can use DS1307 library to read RTC data but then code may change
It was very helpful
Thanks for leaving nice words. Hope you've enjoyed!
Once the time is set do you deselect the time set coding so it isn't updating every time you upload the code?
impressive
Thanks Raj
This is excellent. How do you calculate time elapsed between 2 RTC readings. Seems like a lot of code:(
Yes there need to write lots of code for your RTC Module and Arduino Project
Best wishes
Amazing video 💕❤✨
But I am facing some issue plz help...
1. How do I remove "Day" from program. ( I tried but it gating some issue like year not showing properly because sequence from 'Seconds' register get changed.) how to do it safely.
2. time and date gating reset (at initial time) every time I open the serial monitor.
What is the purpose of adding RTC component?
Hi Thuyen
Every data we read from sensor will be useful when we know that time that data has generated. This means timestamp is extremely useful to monitor and control embedded devices in real time. And RTC which is an Real Time Clock gives you the same. That's why hardly any embedded product will be build without using RTC in Projects. I hope you find this information useful.
Best Wishes
Umesh
Hello ; this code can use with ds3231rtc or not ?
Can i ask .. what's component that you use?? did you use lcd module display for arduino
Hi Nurul, in this video I've printed RTC Data Date Time on Serial monitor of Arduino IDE but if you wish you can display on any display module with Arduino. I've published another video for display module interfacing with Arduino Uno. I hope it will be useful to you
Best Wishes
Umesh Lokhande
does it make a difference if the *seconds , *hours are not highlighted while typing?
No
Sir, i'm getting 165 value for date,time etc. i dont't understand why? Please help me out.
Sir i have recive a error
'Wire' was not declared in this scope
At compile time
This seems to be an issue with Wire.h library header file. As its a built in Arduino libraries. I'll suggest make sure your Arduino IDE is installed properly and linked all libs correctly. If not then, try reinstall or test with other computer. This will help to fix issue with arduino software. Good luck and best wishes
i have tried like your code but the printout result with wrong format : 85:165:45 165 165/165/165. how can i fix it?
Hi Dung, this random value from RTC Ds1307 results due to loose connections between Arduino and RTC. Also check your coin cell in backside of RTC Module. I hope this may help you. Good luck!
@@BINARYUPDATES thanks sir, i have checked and found the problem. it lost connection between nano board and DS1307. thank you very much!
Demais, muito bom mesmo, parabéns, não sei nada de arduíno, estou aprendendo agora, mas, segui direitinho todo o seu passo a passo, e deu certo certo aqui, funcionou legal mesmo, e como faço pra colocar um display (1602A) professor? Quero fazer um projeto com hora programada pra minha horta com quatro horários diferente, é muito difícil? me ajuda por favor, obrigado, parabéns.
Sir, could you explain how to set rtc time using android app (made by app inventor ex) via bluetooth communication? I need to make an alarm device which can set the time using android. Could you help me please.
Thanks a lot.
Mohsen, Most welcome!
thank you. 59seconds-(0101 1001 (0) / 0011 1011(x))? right?
Yeh mobile par nahi hai data.
Hi Sanjay, is video me RTC (real time clock) ka data Serial monitor pe print kar ke dikhaya hai! mobile ke liye arduino ko internet connectivity provide karna hoga.
Really,Thank you
Hi, Nice tutorial, i have a few questions.
1. In my arduino IDE, second, minute, hour , day ... are not highlighted? i want to ask why?
2. i keep getting an error In function[ 'main': "undefined reference to 'loop'
Thank you, and i'm sorry if they are obvious, i'm new
same goes with me :'( .. so how you resolve it .. can you share with me
Thanks