Same problem. Came here because of that. The plastic thing only stays after everything screwed and the blade just won't move. Expensive piece of garbage...
Finally reassembled well! However, could almost lose my eye as one of black part popped out and hit my right eye. Pleae be careful when you put the blade. Safe to hold it on your thumb while you are adjusting
I literally had to learn the hard way, took me forever trying to be gentle then u finally got it and watched this to reassemble just to be safe. But I was thinking the same thing when I saw you struggling with it. I was finna drop a comment but I saw a subscriber already did
Just clip it on with the trapezoid shape plastic clip. If it keeps falling off while it’s on closed lever, just hold it down and put both blades over it. Then just tighten them all the way. This will hold it down at all times while you’re cutting on open or closed
@@spanial Yes, the new motor gives it the Magic Clip a bit more torque/power, kind of like the Seniors. The battery just lets it run longer, perfect if you trim multiple people in one session.
@@noahvaldez4508 yes it happened to me too today but the blades were off..i was cleaning the clipper and I moved the lever to open and the plastic that moves the blade flew litteraly out of my clipper...but i put it back all together after...
Time to buy a new one or change the parts within time it happens. So the parts you’re gonna need is a new motar new screws and new blades for for your clipper
I have two clients that I encounter this w. I’m a predominantly black barber and both of the clients that catch the snags have really weird hair textures, maybe you need to readjust. That’s what worked for me, I have three pair of magic clips. One for balding out lines, on for kids, and one for just fading. Try a different set up before you buy a new one because I’ve personally never heard a loud magic clip, my opinion is you need to take it apart, thoroughly clean it and then test it… I’m sure you’ll be able to get it to cut clean again
I think you put the wrong time stamp, but I used 2 products in this video. 1 being normal clipper oil. Which any major clipper brand should work. Andis, wahl, oster etc. the 2nd product being blade wash. Which just helps clean and lubricate. And same thing any major clipper brand should be fine.
I'm having trouble fitting the side thing on the clipper on. It's because of the bolt. I don't know what to do. Any suggesstions? You seem to put it on with ease.
There’s a tiny little nut that fits in a groove. It can fall out if you’re not watching. It’s very small but sits in place. Should be easy to replace if lost. I’m disappointed he didn’t mention it.
Is it just me or is the build quality garbage for something this expensive The wiring and boar looks like any cheap Chinese device and the price is 10x that
hey i have a question, do you have any fix for the springs shooting out while trying to reassemble the blade
If the spring is shooting out that means you didn’t put it in correctly
I have this old wahl clipper the same one in the video and I was wondering if I bought a charging dock for it would it work
thank you mate, just right what I need. nice video and good luck
Excellent video. Super helpful. Thanks!
Someone can tell me why at 15:19 mine won't clip pls?
(I have a WAHL Magic Clip Cordless)
mine wont either
Same problem. Came here because of that.
The plastic thing only stays after everything screwed and the blade just won't move.
Expensive piece of garbage...
@@alvarosantos78yeah dude it doesn’t pop in like his did like wtf I’m pissed I even took this thing apart
Finally reassembled well! However, could almost lose my eye as one of black part popped out and hit my right eye. Pleae be careful when you put the blade. Safe to hold it on your thumb while you are adjusting
With that chrome top cover, just push down and forward with your thumb, slides right out no need to pry. 👍
Thanks for the tip!
I literally had to learn the hard way, took me forever trying to be gentle then u finally got it and watched this to reassemble just to be safe. But I was thinking the same thing when I saw you struggling with it. I was finna drop a comment but I saw a subscriber already did
This spring keeps popping out
Just clip it on with the trapezoid shape plastic clip. If it keeps falling off while it’s on closed lever, just hold it down and put both blades over it. Then just tighten them all the way. This will hold it down at all times while you’re cutting on open or closed
my blade holder the brown part keeps popping out what do i do
Order another piece because it’s fucked
@@shortclips39name ???
Same wtf
Shaved the little square piece so the lever piece can move freely. When you screw the top blade down you should be good
Thanks for the guide. I installed a larger battery and a faster motor. Plus, the trimmer is cleaner than ever.
Where do you buy the motor?
Does it work better ? Link the motor and battery
@@spanial Yes, the new motor gives it the Magic Clip a bit more torque/power, kind of like the Seniors. The battery just lets it run longer, perfect if you trim multiple people in one session.
i don’t know how soon you’d get to this but spring keeps popping out when i’m trying to adjust my lever.
The spring is popping out? Are you adjusting your lever when the blade is on or off?
Lol keeps happening to me tooo I’m about done fighting this spring
@@marlenegarcilazo6552 that’s odd, it should be able to just stay in place
I just fought it I hope it does not mess mine up that way
@@noahvaldez4508 yes it happened to me too today but the blades were off..i was cleaning the clipper and I moved the lever to open and the plastic that moves the blade flew litteraly out of my clipper...but i put it back all together after...
Would you be able to do the same thing but for the trimmers ?
What is the problem if your cordless magic clip is loud and pulls hair?
Time to buy a new one or change the parts within time it happens. So the parts you’re gonna need is a new motar new screws and new blades for for your clipper
I have two clients that I encounter this w. I’m a predominantly black barber and both of the clients that catch the snags have really weird hair textures, maybe you need to readjust. That’s what worked for me, I have three pair of magic clips. One for balding out lines, on for kids, and one for just fading. Try a different set up before you buy a new one because I’ve personally never heard a loud magic clip, my opinion is you need to take it apart, thoroughly clean it and then test it… I’m sure you’ll be able to get it to cut clean again
2:42 what is that bottle? oil? do you ecomend any type? Thank you
I think you put the wrong time stamp, but I used 2 products in this video. 1 being normal clipper oil. Which any major clipper brand should work. Andis, wahl, oster etc. the 2nd product being blade wash. Which just helps clean and lubricate. And same thing any major clipper brand should be fine.
a little magnet came out where does it go?
I'm having trouble fitting the side thing on the clipper on. It's because of the bolt. I don't know what to do. Any suggesstions? You seem to put it on with ease.
What in detail is the problem bro?
How do i put my lever back in it wont tighten
How long does it take before your magic clip gets hot?
Cause mine takes about 5 mins and it's(it is brand new), is this normal?
Get a ceramic blade replacement all magic clips get hot fast that's why everybody buys a ceramic blade
Great job explaining! Thank you!
saved my life bro 😂
The spring litetally popped me in my eye bro 😭
Did u ever figure out how to put it in place?
@@alejandrobarcenas4515did you ?? Jaja
@@AngelRodriguez-wf7wr yeah I bought a replacement piece from Amazon
What size is the screw driver?
I’m not sure, I just make sure to use different sizes that’ll fit the screws. I couldn’t tell you the exact measurements though.
Why is my lever loose even if I am screwing it all the way
same problem
Gotta be stripped the replacement shouldn’t be more than $25 for all replacement parts
There’s a tiny little nut that fits in a groove. It can fall out if you’re not watching. It’s very small but sits in place. Should be easy to replace if lost. I’m disappointed he didn’t mention it.
Helpful !
Glad to hear !
I think you forgot to add the re-oiling step?
thx you senpaii
Is it just me or is the build quality garbage for something this expensive
The wiring and boar looks like any cheap Chinese device and the price is 10x that
👍👍👍
thanks
Use vaccum..easy bro..