The gantry and its functions seem to operate fine, water pressure is very good, presoak functions well and none of the nozzles visible to me are clogged. I would suggest the operator inspects all of the infrared sensors to see if they are dirty and obscured, and to have a look at some of the pumps. New brushes is a must.. the current ones look very discoloured.
Sensors are just dirty as you can see on the movement of the FlexStream roof nozzle during the top high pressure wash. The high pressure wheel wash didn't work at all, fresh water nozzles on the top brush are clogged or pressure is set to low. Wax application failed completely. The SofTecs material is worn. This SoftCare² Pro needs a big clean and maintenance.
it does correct itself for fail one by noticing that it something with the black thingys around the dryer unit then it goes back more and does what it is supposed to do
Parhain tähän asti missä olen käynyt on tämä: th-cam.com/video/jUA_vzf5ECA/w-d-xo.html WashTec SoftCare2 Pro, Christ Genius Vitesse ja Tammermatic T700 Lux ovat parhaat koneet omasta mielestäni. Paljon riippuu mitä varusteita niihin on otettu ja minkälaista ohjelmaa ajetaan.
@@CarWash811 On a Ceccato Pegasus I go to there are no bars but when I put my leg close to the gantry it stops. There is a Istobal M12+ near me but I didn't try it and it has no bars
The gantry and its functions seem to operate fine, water pressure is very good, presoak functions well and none of the nozzles visible to me are clogged. I would suggest the operator inspects all of the infrared sensors to see if they are dirty and obscured, and to have a look at some of the pumps. New brushes is a must.. the current ones look very discoloured.
Sensors are just dirty as you can see on the movement of the FlexStream roof nozzle during the top high pressure wash. The high pressure wheel wash didn't work at all, fresh water nozzles on the top brush are clogged or pressure is set to low. Wax application failed completely. The SofTecs material is worn. This SoftCare² Pro needs a big clean and maintenance.
@@CarWash99 Yes, definitely.
Nice video. ;) Unfortunately the car wash is very dirty. :(
Yes it shold be replaced.
it's old carwash ! 😮 🚙🚙 🧼🧽
This machine must be replaced!
Yes it really should be replased.
At 0:30 why do they ask you to ring that number on that board?
It's for the emergency situations if machine gets stuck.
@@CarWash811 Ah OK then
Are There 2 of this softcare2pro Systems?
Yes there is :)
Nice und funny video
Wow
Il ont changé
Great Video! But very worn. 😭
I made this video to show what happens when they don't service these machines. This was bad.
Is it the system you filmed in your first video?
Congratulations to 9000 Subscribers! :)
@@SylviejonesNr I have filmed this before. Still on bad condition.
COULD TO BE FAILED
Yes this is worn system.
@@CarWash811 for 4 failes is viable repare the system or replace it?
@@antoniomanuel5833 They still use it :(
@@CarWash811 ah
FAIL I: It thinks the rear window is the rear of the car.
FAIL II: No wheelwash.
FAIL III: Poor wax aplication.
FAIL IV: Rinse could be better.
it does correct itself for fail one by noticing that it something with the black thingys around the dryer unit then it goes back more and does what it is supposed to do
Mikä on suomen paras konepesu sun mielestä?
Parhain tähän asti missä olen käynyt on tämä: th-cam.com/video/jUA_vzf5ECA/w-d-xo.html WashTec SoftCare2 Pro, Christ Genius Vitesse ja Tammermatic T700 Lux ovat parhaat koneet omasta mielestäni. Paljon riippuu mitä varusteita niihin on otettu ja minkälaista ohjelmaa ajetaan.
What are those two bars in front of the gantry?
If the car is parked too close to the wash those bars will touch the car and stop it.
@@CarWash811 On a Ceccato Pegasus I go to there are no bars but when I put my leg close to the gantry it stops. There is a Istobal M12+ near me but I didn't try it and it has no bars
@@mrbalkan69 It is good safety feature.