Liked the whole assembly, nice job. One thing I would recommend is a radar mast, as that's really a must when you have an offshore boat. The other recommendation is that the antenna's need to go up on the mast as your radio signal only goes as far as the antenna is high. Roughly for every 16 feet an antenna is in the air you get 1 mile of communication by radio.
Thanks Kaka, Mariton Marine is a aluminium boat building business but unfortunately they could finish my project. Like for me the guys (Daniel and Jacko) at Metal & Marine have taken on the job to complete of the fabrication work.
That is very good and good work men. I need to ask u , how could I get find a book or design to build a boat. Could u tell me if it possible. Thanks Sirak from Norway.
@@Micington yeah man i spent 13hrs on the top of the bottom of a Munson boat due to stress cracks, and the fwd bulkhead had no limber holes, or bilge pump. Compartment filled up while running with cargo onboard. Capsized in 40deg water ,35kt north winds Munson just welds the boats no oven time.
@@CaptainDayne geez. Glad you’re ok! Were you with someone else too or by yourself? Did you learn the heat treatment after you got back safe? I’ll think twice about boat repairs to tinnies!
@@Micington yeah had 2 deckhands with me We are ok. Hugged it out all night. Bodyheat that was 2018 december 21. The day of the government shutdown. Coast guard called twice 1am and 3am by ship pilots. They never came. Got rescued by a tug and barge at 730am. We departed at 630pm the previous night.
Liked the whole assembly, nice job. One thing I would recommend is a radar mast, as that's really a must when you have an offshore boat. The other recommendation is that the antenna's need to go up on the mast as your radio signal only goes as far as the antenna is high. Roughly for every 16 feet an antenna is in the air you get 1 mile of communication by radio.
Looks bloody strong with all the stringers!
It definitely has a very strong structure, I am very impressed with the design and simplicity of it.
Sensacional projeto ficou da hora, bem arrojado, um investimento grande mais de muito bom gosto. Parabéns boa sorte 👏👏👏👏👏,✌️💪👍👍❣️❣️
Well done mate, be good to see the finished boat, great job
Cheers Dave, hope to have a new video up shortly
Really inspiring, Thank you for the upload. What is it that Mariton Marine will do? Be great to see it finished.
Thanks Kaka, Mariton Marine is a aluminium boat building business but unfortunately they could finish my project. Like for me the guys (Daniel and Jacko) at Metal & Marine have taken on the job to complete of the fabrication work.
Excellent 👍👍👍
bravo
Brother is the almonum you use is alloy ?
That frame is supper heavy duty, only thing I want to know is if it's too Ridgid wouldn't it start to crack?
Good possibility… but with the load dispersion, I really don’t think it’ll be too much of an issue.
🔝
👍👍👏👏
That is very good and good work men. I need to ask u , how could I get find a book or design to build a boat. Could u tell me if it possible. Thanks Sirak from Norway.
You will need to purchase it from PureKraft. purekraftboats.co.nz/
@@valleycrew3 can´t see any book there.
I would like a chart and dimensions of this boat if possible (pdf)
Nice! what is the thickness of the hull? what is the welder that you used and does it require 3-phase power?
It 6mm plate for the hull, 4mm sides. Welder is 270WIA mig welder, 3 phase required.
@@valleycrew3 Thanks mate!
Is your welder a double pulse Mig?
Single pulse welder
Saai ontwerp daar zou ik meer werk van maken.verder ziet het er redelijk uit.
I have a question was the hull put in an oven after final weld ? Stress cracks plague aluminum boats if not heated. Experience here!
Yes after the full longitudinal welds have been completed
Handy to know that. Good question
@@Micington yeah man i spent 13hrs on the top of the bottom of a Munson boat due to stress cracks, and the fwd bulkhead had no limber holes, or bilge pump. Compartment filled up while running with cargo onboard.
Capsized in 40deg water ,35kt north winds
Munson just welds the boats no oven time.
@@CaptainDayne geez. Glad you’re ok! Were you with someone else too or by yourself? Did you learn the heat treatment after you got back safe? I’ll think twice about boat repairs to tinnies!
@@Micington yeah had 2 deckhands with me
We are ok. Hugged it out all night.
Bodyheat that was 2018 december 21. The day of the government shutdown. Coast guard called twice 1am and 3am by ship pilots. They never came. Got rescued by a tug and barge at 730am. We departed at 630pm the previous night.
600 outboard?
May i borrow your general arrangment that boat
wht software use for crate this design?
Is this English? Perhaps you are asking which software did you use to create this design?
Yes Steve I’m sure that’s what he is asking.
@@fisheater844 yes,,,,
I am not sure what software programme Purekraft are using. Check out their website.
purekraftboats.co.nz/
0:21
whats the price like for something like this?
For the flat pack kit with trailer, is approx. $50k
Bonjour ! vous acceptez quelqu'un de venir apprendre ?
Where can I find cnc files and drawings???
You need to purchase the files from the boat design HMD
Nepal ok
Hi Br would like to come and build me one in South America lets talk
Peu tu donner le liens pour les plan merci
Sorry there’s no link. I brought the plans, mate
Just a photo...
Not a video bro...
I have too bulid aluminium boat at my chanel....
Greeting from Indonesia.
Can you Send me your pdf document please?