Should be 111 FT. LBS torque. on crossmember mounting bolts. The torque that was given was for the crossmember that holds front engine mount. Also mark your crossmembers location or wheel alignment will be off if not put back in the same place.
If you have the 4wd version, the driveline blocks from doing what other videos have suggested or what the Haynes manual says. I ended up having to do this exact process to swap mine.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I say and can verify start wit the through bolt when installing the mount.
i was hoping see how you got that through bolt out, not alot of space in there.
I feel like that would be a pain to do off of jack stands.
Thank you for the video. Why a front end alignment after you were done?
Great video, bro! This is exactly what I was looking for.
Great job explaining the job, best videos i have watched!
Did you replace the same part you removed? I just bought some motor mounts from you guys and the rear mount was significantly shorter than the OEM.
That's the new design. It's to help the pool the oil around the oil pickup tube for increased lubrication.
Genial, estube buscando mucho tiempo este video, ahora sí podré cambiar el soporte , saludos
Should be 111 FT. LBS torque. on crossmember mounting bolts. The torque that was given was for the crossmember that holds front engine mount. Also mark your crossmembers location or wheel alignment will be off if not put back in the same place.
So the 2010 model is sorta different is the Torque Spec the same for the bolts?
Is this fwd or 4x4
I heard a Mitsubishi outlander sport is it has the same frame
That front bolt is a impossible. Tried 3 different wrenches, not a millimetre of room. Going to try and lift the entire engine and inch or two.
Excellent job
Great videos but without a lift and all of those power tools this job would be a royal p.i.t.a!!!
They put a old engine mount back-?
Tres bien, tres bien
Well. I'm gonna have to do this on my girlfriends car soon. Not happy about that.
But thanks for the video.
+Joe Burrier Thanks for watching our video! 1aau.to/m/Shop-TRQ
Exceente bien trabajo
This has become a nightmare for me
Yea this job blows
+Justin s Thanks for watching our video! 1aau.to/m/Shop-TRQ
There is a much easier way to do this without taking apart the whole fuckin undercarriage. Watch a different video lol
If you have the 4wd version, the driveline blocks from doing what other videos have suggested or what the Haynes manual says. I ended up having to do this exact process to swap mine.