Back in 1957 as interstate construction started, I remember all the cool heavy equipment like bull Doziers, Letourno pans , huge cranes etc...at days end the men would be blistered red from sunburn in the summers heat
You prolly dont give a shit but if you're bored like me atm then you can watch all the new movies and series on Instaflixxer. Been streaming with my brother lately =)
I ran some of first D11 that was built similar to D10L, they where a work horse! Think it had more power than the D11R and the T series! Had a slower first gear and Cat back then wanted you to load blade in 1st roll blade back to carry and shift to 2nd! Would carry a blade load easily! When they got the R series was told to stay in first gear which was faster than 1st in first than older D11, which had alot of power! When T series came out, we had one of the first 5 experimental models, which was nice machine but thought C series didn't have the low end power as the 3508 engine!
Amo maquinas tenho uma bl70 volvo quero agora uma escavadeira ...depois um esteira ....só aqui do Brasil vontade de ter máquinas pesadas tenho uma já gracas a deis
Is this all they do is push sand and gravel around for video? I thought they acutely worked in construction make something. Show us that, we would love to see these big machines really working !!
These dozers are mighty machines ,but in damp sticky conditions tracks get jam full of earth needing manual cleaning with the common spade . All track vehicles big and small need cleaning often !
They're basically just limited by the amount of traction they can get... Sweet, dont see many D11 vids because they're all so deep in strip mines no one can get close enough to film them... Tnx for the vid... So is Stokey in UK, i've seen many more vids of them??? This is nothing like Limestone mining in the midwest USA... LOL... 3 years later, YT recommends the video again... Oh well, who cant get enough of some D11 ACTION!!!
Look up “the Jackson brothers” they have two d11 dozers on their farm and make some bad ass videos with them. Like doing tug o wars or hill climbs etc.
It's like a bid ass sand box💖💖💖 I wonder what they must of done way back when before they even had these machines? Can you picture doing this all by hand!? That must of been torture and back braking work!!😩🥵
horses and fresnos..or slips...quater yard at a time.I just cant believe this is an economical way to do this..thers got to be high speed scrapers that could do this way cheaper
Construction Machines Channel I thought I did have a figure for blade capacity but can’t find it. The blade is a 5.58m wife 2.8m tall U-blade. Gives you an idea of what it could push.
Are the drivetrains set up like locomotives? And if not I would love to build a dozer where the diesel engine is just a generator that power's electric motors to turn the drive sprockets. And I'm sure you could gain for torque that way.
Daybot the future is looking that way, cat released d6 and D7 with that’s system. Only a matter of time for the bigger dozer. I would say cost of construction could hold it back for now.
@@matthewtelder7867 imagine the sheer amount of copper for the windings and neodymium magnets!! They'd build like 5 and have used the earth's resources haha!! That would be some serious money!!
Then the next video is in Cambodia,one dozer driver and 8 labourers with their steel toe capped flip flops waving their arms at the dozer driver in his cab that's covered in red ribbons
Looks all good and smooth there in the proving grounds. All dirt! Run the things where I did in a solid sandstone shot that didn't shoot up good. Set it in there on a 20x20 pattern and them shooting 60 and 70 feet at a time. Its miserable, I'm here to tell ya. 12 hour shift and you hurt in places you didn't know existed.
It’s bitch At the end of a 10 hr shift I went home. The Cat stayed around for the next shift. Amazing durable machines. I worked remote mines , 10x10 patterns loaded up the point the stemming might shoot out . Get on grade stay on grade .
@@ianbermingham9047 those were test machines (pilot machine) I'm talking production model. 1982: 335 hp D8L replaced D8K. The D8L was the first D8 with the elevated drive sprocket undercarriage.
@@eannaoreilly4050 The elevated sprocket keeps the shock loads from the blade away from the gears and bearings in the final drives, all the blade loads go to the pivot shaft that the track frames are mounted on as well as the bogie under carriage reduces vertical shock loads by up to 50% according to Cat. Plus they have components that are easily swapped out rather than tearing the whole machine down. The transmission plugs in the back, the final drives/ steering clutches plug in the side so there is less down time to do repairs. Much smoother ride for the operator especially in rock.
Maybe this one is the normal one, 850HP, because Cat D11T you can order whatever engine you want, Some company have cat D11T 1200HP and they say you can buy 1500HP
Can anyone in the dozer and excavator world tell me what the green strobe light on the cab roof of these machines are for. Seems like a worldwide addition to these machines along side the existing yellow strobe. Anyone?
That’s a gigantic and beautiful machine in action.
Back in 1957 as interstate construction started, I remember all the cool heavy equipment like bull Doziers, Letourno pans , huge cranes etc...at days end the men would be blistered red from sunburn in the summers heat
You spell dozer wrong sir
@@chief4220 Nope smart ass that’s the real spelling
@@flalingbashers2957 :|
@@flalingbashers2957 U like to call people "names" let me guess
@@flalingbashers2957 and have u seen the title "Dozer"
Tony the king of the Klondike needs one of these 👍🏼
If you’ve never been near one of these behemoths just use the operator for scale….. that’s a fkn mountain of dirt in front of that blade!!
Really😅 powerful and does a nice job. Nice looking machine😊. Thanks for the video.
Nice to see a Dozer operated properly from time to time! Wuhoo.
Отличная техника
What a Monster! D11 is top Dog!
Nice Working with D11T Dozer
Awesome video excellent operator no dust perfect conditions
And no crap music
ווואלה. מקצועי. בלד
Great drone job!!
Un verdadero monstruo de caterpillar,y que ing.inventó este coloso...por donde pasa debe temblar la tierra...
In my opinion, the Caterpillar D11T is the most powerful bulldozer. There were many such videos on my channel. You can log in and see.
Thank you for the awesome video. Like!👍
Wow super Bulldozer 😎👍
The power of caterpillar... 💪💪💪
Excellent video...my kids are big fans of your channel. Keep up the great work!
Excellent drone footage 👍 top quality
I would love the chance to get to run one. Even for just an hour. Amazing.
You prolly dont give a shit but if you're bored like me atm then you can watch all the new movies and series on Instaflixxer. Been streaming with my brother lately =)
@Kristopher Alexis Yup, been watching on InstaFlixxer for months myself :D
@@thaddeushezekiah3167 lol.lĺlllĺĺlĺ
I ran some of first D11 that was built similar to D10L, they where a work horse! Think it had more power than the D11R and the T series! Had a slower first gear and Cat back then wanted you to load blade in 1st roll blade back to carry and shift to 2nd! Would carry a blade load easily! When they got the R series was told to stay in first gear which was faster than 1st in first than older D11, which had alot of power! When T series came out, we had one of the first 5 experimental models, which was nice machine but thought C series didn't have the low end power as the 3508 engine!
Poderoso D 11 T, puede con todo, Dozer valiente, claro es CAT
I like seeing the dozer doing Its thing.
Amo maquinas tenho uma bl70 volvo quero agora uma escavadeira ...depois um esteira ....só aqui do Brasil vontade de ter máquinas pesadas tenho uma já gracas a deis
Amo la maquinaria pesada !
Amazing.... Most powerful "caterpillar"
Super Video with CAT Power!
Moço da gosto de ver uma máquina dessa trabalhando
الله يبارك بالعقول
Best d11t vid out there
Caterpillar D11T. Bulldozer En Acción.
I can't imagine the enormous amount of wear those tracks and roller must endure with all that grit !
I cant imagine the bill to replace them!!
Хорошо снято. Приятно смотреть
Caterpillar 💪💪💪💪💪👍👍👍👍🎥👍🤝🙋♂️
Y
Mon oop
When it's so big, it needs catwalks to get to the various areas on it for maintenance and repair.
Awesome.machine
2 camiones y una retro buena bajan el doble de tierra que el D11,,,, mucha maquina en el lugar inapropiado
Très belle machine
Is this all they do is push sand and gravel around for video? I thought they acutely worked in construction make something. Show us that, we would love to see these big machines really working !!
Question, why not run a U blade?
This is soft soil.. why push it that far with a dozer? A large scraper would be more effective right?
These dozers are mighty machines ,but in damp sticky conditions tracks get jam full of earth needing manual cleaning with the common spade .
All track vehicles big and small need cleaning often !
Your comment brings these seemingly godly machines back down to earth.
@@philippastore2228 it's always the 10p fuse that stops the £1000,000 machine!!
I remember those long boring pushes
Strong and reliable
They're basically just limited by the amount of traction they can get... Sweet, dont see many D11 vids because they're all so deep in strip mines no one can get close enough to film them... Tnx for the vid... So is Stokey in UK, i've seen many more vids of them??? This is nothing like Limestone mining in the midwest USA...
LOL... 3 years later, YT recommends the video again... Oh well, who cant get enough of some D11 ACTION!!!
Paul Pence Yes, Stokey is a UK company
Look up “the Jackson brothers” they have two d11 dozers on their farm and make some bad ass videos with them. Like doing tug o wars or hill climbs etc.
Wonder how many yards of dirt/earth is being moved by that machine?
I would love to sit on the seat of that sweet Sweet machine
Meu nome é Jurandir. É um sonho que eu quero realizar vê uma máquina dessa de perto. Moro em Palmeira dos índios alagoas.
Proper outfit👍
It's like a bid ass sand box💖💖💖 I wonder what they must of done way back when before they even had these machines? Can you picture doing this all by hand!? That must of been torture and back braking work!!😩🥵
horses and fresnos..or slips...quater yard at a time.I just cant believe this is an economical way to do this..thers got to be high speed scrapers that could do this way cheaper
That would be fun for a day .
Caterpillar machinery rules the earth 🌍
Super video. What approx m3 of material can this D11 move in a push?
Construction Machines Channel I thought I did have a figure for blade capacity but can’t find it. The blade is a 5.58m wife 2.8m tall U-blade. Gives you an idea of what it could push.
98.0 cu yards
Are the drivetrains set up like locomotives? And if not I would love to build a dozer where the diesel engine is just a generator that power's electric motors to turn the drive sprockets. And I'm sure you could gain for torque that way.
Daybot the future is looking that way, cat released d6 and D7 with that’s system. Only a matter of time for the bigger dozer. I would say cost of construction could hold it back for now.
@@matthewtelder7867 imagine the sheer amount of copper for the windings and neodymium magnets!! They'd build like 5 and have used the earth's resources haha!! That would be some serious money!!
Powerhouse 👍👍
I operate one but is cat D10t at Iron Ore mine a very powerful machine......
Hey, it's that guy from Diecast Model Originals, only bigger.
Dear Santa,
what's different from D11R..but it is smaller than D10T
Sounds like a Prius
Beast
So they are reclaiming this mine?
Caterpillar is ready for space mining ? the extraction ressources from asteroids and new engines to do that job
what drone is that shot by?
M3 Drone Records Phantom 4 Pro
Why does this look like fun to me?
THAT'S MY DREAM TO OPERATE THAT MACHINE
👍👍
That dirt is soft so why are we ripping?
Great video we have a bunch in the coal mine where I work. #AmericanCoalMiner
Nice video but would love to know what's being built here?
Jussi Mäkelä it’s a sand and gravel quarry
and it looks like they making tarmac from it ....hmm interesting ....
@@bacazterchovej2235 Something great though ..?
Why not bring a scraper to move that material ? We were taught that if you have to push material more than 300 feet , bring a scraper .
where are these place, what type of farm to make?
Wow
Then the next video is in Cambodia,one dozer driver and 8 labourers with their steel toe capped flip flops waving their arms at the dozer driver in his cab that's covered in red ribbons
Those tracks don't look near wide enough to support something so big and heavy !
Awesome 💪🏼👍🏻
Looks all good and smooth there in the proving grounds. All dirt! Run the things where I did in a solid sandstone shot that didn't shoot up good.
Set it in there on a 20x20 pattern and them shooting 60 and 70 feet at a time.
Its miserable, I'm here to tell ya.
12 hour shift and you hurt in places you didn't know existed.
It’s bitch
At the end of a 10 hr shift I went home. The Cat stayed around for the next shift. Amazing durable machines.
I worked remote mines , 10x10 patterns loaded up the point the stemming might shoot out .
Get on grade stay on grade .
Wouldn't trade this job for anything else
Нам бы на полигон такой на недельку
👍
Под картоху пашут?
1982 was the first year Cat came out with the High Drive Sprocket.
You're way off it was first launched in Cat dealers in 1977
@@ianbermingham9047 those were test machines (pilot machine) I'm talking production model.
1982: 335 hp D8L replaced D8K. The D8L was the first D8 with the elevated drive sprocket undercarriage.
@@tullyman82 D 10 was the first Hi Drive came out in 77 as a production model.
So basically, can anybody tell me, what's the theory of the elevated drive sprocket rather than the conventional one at ground level?
@@eannaoreilly4050 The elevated sprocket keeps the shock loads from the blade away from the gears and bearings in the final drives, all the blade loads go to the pivot shaft that the track frames are mounted on as well as the bogie under carriage reduces vertical shock loads by up to 50% according to Cat. Plus they have components that are easily swapped out rather than tearing the whole machine down. The transmission plugs in the back, the final drives/ steering clutches plug in the side so there is less down time to do repairs. Much smoother ride for the operator especially in rock.
👍👍👍👍👍🔥
Amazing machine I would like to operate one nice machine 👍
Wish the camera didn’t move around quite as much.
I don’t understand why he’s pushing straight through the middle of a windrow. Just moving it from the middle to the outsides. Not efficient !
If i ever win the lotto gettn 1..
❤❤
Now that's what you call a bulldozer! What hp has it got ?
Google it 🙄
@@ianbermingham9047 can't google it without knowing what model it is
Maybe this one is the normal one, 850HP, because Cat D11T you can order whatever engine you want,
Some company have cat D11T 1200HP and they say you can buy 1500HP
@@wonnelzoldilock7758 blimey a 1500hp engine on a bulldozer, that's alot of power
Afinal , o que este trator está fazendo ,, ñ vi nada só espalhando barro
But what is he doing ,recliming,striping,what,what
You came here to see coming 2021 flagman set in real life
Exstra machin
I believe after two ,three months of training with weights ,i can stop it if i push strong my legs.
Lego Technic 42131...😉
Can anyone in the dozer and excavator world tell me what the green strobe light on the cab roof of these machines are for.
Seems like a worldwide addition to these machines along side the existing yellow strobe. Anyone?
I thinks its for visibility lol
Its for seat belts on, so if seat belts are on , and clipped together light is on. Don't have that down here in Oz yet.
Что сейчас платят в США?
Cien mil avionetas. Con respueto de makinas k no m sirver i. Mas
Put the ear plugs in and ride baby ride! 😎
Caterpillar
I would love nothing more than to park my mother in laws car in front of this beast...😁
Komatsu D575 for me. Thanks
Fool!!!!
o komatsu D575a sola ele